On 5/2/19 2:13 PM, Jae Hyun Yoo wrote:
There are cases that interrupt bits are cleared by a 500ms delayed
work which causes unnecessary irq calls. Also, the current
interrupt handler returns IRQ_HANDLED always but it should return
IRQ_NONE if there is any unhandled interrupt. So this commit
refines the interrupt handling logic to fix these issues.
Thanks Jae, looks good.
Reviewed-by: Eddie James <eajames@xxxxxxxxxxxxx>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
Reviewed-by: Andrew Jeffery <andrew@xxxxxxxx>
---
drivers/media/platform/aspeed-video.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 8d0bb395e46d..98944a911998 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -488,6 +488,7 @@ static void aspeed_video_off(struct aspeed_video *video)
/* Disable interrupts */
aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
+ aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xffffffff);
/* Turn off the relevant clocks */
clk_disable(video->vclk);
@@ -556,7 +557,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
VE_INTERRUPT_MODE_DETECT, 0);
aspeed_video_write(video, VE_INTERRUPT_STATUS,
VE_INTERRUPT_MODE_DETECT);
-
+ sts &= ~VE_INTERRUPT_MODE_DETECT;
set_bit(VIDEO_MODE_DETECT_DONE, &video->flags);
wake_up_interruptible_all(&video->wait);
} else {
@@ -601,12 +602,12 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
VE_INTERRUPT_COMP_COMPLETE, 0);
aspeed_video_write(video, VE_INTERRUPT_STATUS,
VE_INTERRUPT_COMP_COMPLETE);
-
+ sts &= ~VE_INTERRUPT_COMP_COMPLETE;
if (test_bit(VIDEO_STREAMING, &video->flags) && buf)
aspeed_video_start_frame(video);
}
- return IRQ_HANDLED;
+ return sts ? IRQ_NONE : IRQ_HANDLED;
}
static void aspeed_video_check_and_set_polarity(struct aspeed_video *video)
