Add mediatek mipicsi driver for Mediatek SOC MT2712 Change in v2: - Add the dt-binding document for mediatek mipicsi driver - Modify the logic about "is_support" function in patch "[media] mtk-mipicsi: add color format support for mt2712" Stu Hsieh (15): dt-bindings: media: Add binding for MT2712 MIPI-CSI2 [media] mtk-mipicsi: add mediatek mipicsi driver for mt2712 [media] mtk-mipicsi: add pm function [media] mtk-mipicsi: add color format support for mt2712 [media] mtk-mipicsi: get the w/h/bytepwerline for mtk_mipicsi [media] mtk-mipicsi: add function to support SerDes for link number [media] mtk-mipicsi: add mipicsi reg setting for mt2712 [media] mtk-mipicsi: enable/disable ana clk [media] mtk-mipicsi: enable/disable cmos for mt2712 [media] mtk-mipicsi: add ISR for writing the data to buffer [media] mtk-mipicsi: set the output address in HW reg [media] mtk-mipicsi: add function to get the format [media] mtk-mipicsi: add the function for Get/Set PARM for application [media] mtk-mipicsi: add debug message for mipicsi driver [media] mtk-mipicsi: add debugfs for mipicsi driver .../bindings/media/mediatek-mipicsi-camsv.txt | 53 + .../media/mediatek-mipicsi-common.txt | 19 + .../bindings/media/mediatek-mipicsi.txt | 54 + drivers/media/platform/mtk-mipicsi/Makefile | 4 + .../media/platform/mtk-mipicsi/mtk_mipicsi.c | 1686 +++++++++++++++++ 5 files changed, 1816 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi-camsv.txt create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi-common.txt create mode 100644 Documentation/devicetree/bindings/media/mediatek-mipicsi.txt create mode 100644 drivers/media/platform/mtk-mipicsi/Makefile create mode 100644 drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c -- 2.18.0
