On Wed, Feb 27, 2019 at 01:16:06PM -0600, Brad Love wrote:
> Includes support to identify and use two Hauppauge device.
> HVR-1955:
> - LGDT3306a ATSC/QAM demod
> - si2177 tuner
> - cx25840 decoder for analog tv/composite/s-video/audio
>
> HVR-1975 dual-frontend:
> - LGDT3306a ATSC/QAM demod
> - si2168 DVB-C/T/T2 demod
> - si2177 tuner
> - cx25840 decoder for analog tv/composite/s-video/audio
>
> Signed-off-by: Brad Love <brad@xxxxxxxxxxxxxxxx>
First of all there are bunch of checkpatch.pl --strict warnings and checks
that need resolving.
> ---
> Since v2:
> - Fix build with VIDEO_PVRUSB2_DVB enabled
> Changes since v1:
> - Fix build with VIDEO_PVRUSB2_DVB disabled
> - Insert 160xxx code lower, so 75xxx profile is not split
> - Reorganize 160xxx board profile
> - Share config where possible
>
> drivers/media/usb/pvrusb2/Kconfig | 2 +
> drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c | 25 ++++
> drivers/media/usb/pvrusb2/pvrusb2-devattr.c | 164 ++++++++++++++++++++++++
> drivers/media/usb/pvrusb2/pvrusb2-devattr.h | 1 +
> drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h | 4 +
> drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 36 +++++-
> 6 files changed, 231 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/usb/pvrusb2/Kconfig b/drivers/media/usb/pvrusb2/Kconfig
> index 1ad913f..144631c 100644
> --- a/drivers/media/usb/pvrusb2/Kconfig
> +++ b/drivers/media/usb/pvrusb2/Kconfig
> @@ -40,6 +40,8 @@ config VIDEO_PVRUSB2_DVB
> select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
> select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
> select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
> + select DVB_LGDT3306A if MEDIA_SUBDRV_AUTOSELECT
> + select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
> select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
> diff --git a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c
> index d5bec0f..36016ab 100644
> --- a/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c
> +++ b/drivers/media/usb/pvrusb2/pvrusb2-cx2584x-v4l.c
> @@ -111,10 +111,35 @@ static const struct routing_scheme routing_defav400 = {
> .cnt = ARRAY_SIZE(routing_schemeav400),
> };
>
> +static const struct routing_scheme_item routing_scheme160xxx[] = {
> + [PVR2_CVAL_INPUT_TV] = {
> + .vid = CX25840_COMPOSITE7,
> + .aud = CX25840_AUDIO8,
> + },
> + [PVR2_CVAL_INPUT_RADIO] = {
> + .vid = CX25840_COMPOSITE4,
> + .aud = CX25840_AUDIO6,
> + },
> + [PVR2_CVAL_INPUT_COMPOSITE] = {
> + .vid = CX25840_COMPOSITE3,
> + .aud = CX25840_AUDIO_SERIAL,
> + },
> + [PVR2_CVAL_INPUT_SVIDEO] = {
> + .vid = CX25840_SVIDEO1,
> + .aud = CX25840_AUDIO_SERIAL,
> + },
> +};
> +
> +static const struct routing_scheme routing_def160xxx = {
> + .def = routing_scheme160xxx,
> + .cnt = ARRAY_SIZE(routing_scheme160xxx),
> +};
> +
> static const struct routing_scheme *routing_schemes[] = {
> [PVR2_ROUTING_SCHEME_HAUPPAUGE] = &routing_def0,
> [PVR2_ROUTING_SCHEME_GOTVIEW] = &routing_defgv,
> [PVR2_ROUTING_SCHEME_AV400] = &routing_defav400,
> + [PVR2_ROUTING_SCHEME_HAUP160XXX] = &routing_def160xxx,
> };
>
> void pvr2_cx25840_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
> diff --git a/drivers/media/usb/pvrusb2/pvrusb2-devattr.c b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c
> index ef36b62..97b4fc8 100644
> --- a/drivers/media/usb/pvrusb2/pvrusb2-devattr.c
> +++ b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c
> @@ -37,6 +37,9 @@ pvr2_device_desc structures.
> #include "tda18271.h"
> #include "tda8290.h"
> #include "tuner-simple.h"
> +#include "si2157.h"
> +#include "lgdt3306a.h"
> +#include "si2168.h"
> #endif
>
>
> @@ -525,7 +528,164 @@ static const struct pvr2_device_desc pvr2_device_751xx = {
> #endif
> };
>
> +/*------------------------------------------------------------------------*/
> +/* Hauppauge PVR-USB2 Model 160000 / 160111 -- HVR-1955 / HVR-1975 */
> +
> +#ifdef CONFIG_VIDEO_PVRUSB2_DVB
> +static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap);
> +static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap);
> +static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap);
> +static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap);
> +
> +static const struct pvr2_dvb_props pvr2_160000_dvb_props = {
> + .frontend_attach = pvr2_dual_fe_attach,
> + .tuner_attach = pvr2_si2157_attach,
> +};
Newline.
> +static const struct pvr2_dvb_props pvr2_160111_dvb_props = {
> + .frontend_attach = pvr2_lgdt3306a_attach,
> + .tuner_attach = pvr2_si2157_attach,
> +};
> +
> +static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap)
> +{
> + struct si2157_config si2157_config = {};
> +
> + si2157_config.inversion = 1;
> + si2157_config.fe = adap->fe[0];
> +
> + adap->i2c_client_tuner = dvb_module_probe("si2157", "si2177",
> + &adap->channel.hdw->i2c_adap,
> + 0x60, &si2157_config);
Indentation.
> +
> + if (!adap->i2c_client_tuner)
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap)
> +{
> + struct si2168_config si2168_config = {};
> + struct i2c_adapter *adapter;
> +
> + pr_debug("%s()\n", __func__);
> +
> + si2168_config.fe = &adap->fe[1];
> + si2168_config.i2c_adapter = &adapter;
> + si2168_config.ts_mode = SI2168_TS_PARALLEL; /*2, 1-serial, 2-parallel.*/
> + si2168_config.ts_clock_gapped = 1; /*0-disabled, 1-enabled.*/
> + si2168_config.ts_clock_inv = 0; /*0-not-invert, 1-invert*/
> + si2168_config.spectral_inversion = 1; /*0-not-invert, 1-invert*/
> +
> + adap->i2c_client_demod[1] = dvb_module_probe("si2168", NULL,
> + &adap->channel.hdw->i2c_adap,
> + 0x64, &si2168_config);
Indentation.
>
> + if (!adap->i2c_client_demod[1])
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap)
> +{
> + struct lgdt3306a_config lgdt3306a_config;
> + struct i2c_adapter *adapter;
> +
> + pr_debug("%s()\n", __func__);
> +
> + lgdt3306a_config.fe = &adap->fe[0];
> + lgdt3306a_config.i2c_adapter = &adapter;
> + lgdt3306a_config.deny_i2c_rptr = 1;
> + lgdt3306a_config.spectral_inversion = 1;
> + lgdt3306a_config.qam_if_khz = 4000;
> + lgdt3306a_config.vsb_if_khz = 3250;
> + lgdt3306a_config.mpeg_mode = LGDT3306A_MPEG_PARALLEL;
> + lgdt3306a_config.tpclk_edge = LGDT3306A_TPCLK_FALLING_EDGE;
> + lgdt3306a_config.tpvalid_polarity = LGDT3306A_TP_VALID_LOW;
> + lgdt3306a_config.xtalMHz = 25, /* demod clock MHz; 24/25 supported */
> +
> + adap->i2c_client_demod[0] = dvb_module_probe("lgdt3306a", NULL,
> + &adap->channel.hdw->i2c_adap,
> + 0x59, &lgdt3306a_config);
> +
> + if (!adap->i2c_client_demod[0])
> + return -ENODEV;
> +
> + return 0;
> +}
> +
> +static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap)
> +{
> + pr_debug("%s()\n", __func__);
> +
> + if (pvr2_lgdt3306a_attach(adap) != 0)
> + return -ENODEV;
> +
> + if (pvr2_si2168_attach(adap) != 0) {
> + dvb_module_release(adap->i2c_client_demod[0]);
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +#define PVR2_FIRMWARE_160xxx "v4l-pvrusb2-160xxx-01.fw"
> +static const char *pvr2_fw1_names_160xxx[] = {
> + PVR2_FIRMWARE_160xxx,
> +};
> +
> +static const struct pvr2_device_client_desc pvr2_cli_160xxx[] = {
> + { .module_id = PVR2_CLIENT_ID_CX25840 },
> +};
> +
> +static const struct pvr2_device_desc pvr2_device_160000 = {
> + .description = "WinTV HVR-1975 Model 160000",
> + .shortname = "160000",
> + .client_table.lst = pvr2_cli_160xxx,
> + .client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx),
> + .fx2_firmware.lst = pvr2_fw1_names_160xxx,
> + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx),
> + .default_tuner_type = TUNER_ABSENT,
> + .flag_has_cx25840 = !0,
> + .flag_has_hauppauge_rom = !0,
> + .flag_has_analogtuner = !0,
> + .flag_has_composite = !0,
> + .flag_has_svideo = !0,
> + .flag_fx2_16kb = !0,
Why are we writing 1 in such a way?
> + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
> + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
> + .default_std_mask = V4L2_STD_NTSC_M,
> + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
> + .ir_scheme = PVR2_IR_SCHEME_ZILOG,
> +#ifdef CONFIG_VIDEO_PVRUSB2_DVB
> + .dvb_props = &pvr2_160000_dvb_props,
> +#endif
> +};
Newline needed.
> +static const struct pvr2_device_desc pvr2_device_160111 = {
> + .description = "WinTV HVR-1955 Model 160111",
> + .shortname = "160111",
> + .client_table.lst = pvr2_cli_160xxx,
> + .client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx),
> + .fx2_firmware.lst = pvr2_fw1_names_160xxx,
> + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx),
> + .default_tuner_type = TUNER_ABSENT,
> + .flag_has_cx25840 = !0,
> + .flag_has_hauppauge_rom = !0,
> + .flag_has_analogtuner = !0,
> + .flag_has_composite = !0,
> + .flag_has_svideo = !0,
> + .flag_fx2_16kb = !0,
> + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
> + .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
> + .default_std_mask = V4L2_STD_NTSC_M,
> + .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
> + .ir_scheme = PVR2_IR_SCHEME_ZILOG,
> +#ifdef CONFIG_VIDEO_PVRUSB2_DVB
> + .dvb_props = &pvr2_160111_dvb_props,
> +#endif
> +};
>
> /*------------------------------------------------------------------------*/
>
> @@ -552,6 +712,10 @@ struct usb_device_id pvr2_device_table[] = {
> .driver_info = (kernel_ulong_t)&pvr2_device_751xx},
> { USB_DEVICE(0x0ccd, 0x0039),
> .driver_info = (kernel_ulong_t)&pvr2_device_av400},
> + { USB_DEVICE(0x2040, 0x7502),
> + .driver_info = (kernel_ulong_t)&pvr2_device_160111},
> + { USB_DEVICE(0x2040, 0x7510),
> + .driver_info = (kernel_ulong_t)&pvr2_device_160000},
> { }
> };
>
> diff --git a/drivers/media/usb/pvrusb2/pvrusb2-devattr.h b/drivers/media/usb/pvrusb2/pvrusb2-devattr.h
> index c1e7d48..ea0b2bf 100644
> --- a/drivers/media/usb/pvrusb2/pvrusb2-devattr.h
> +++ b/drivers/media/usb/pvrusb2/pvrusb2-devattr.h
> @@ -66,6 +66,7 @@ struct pvr2_string_table {
> #define PVR2_ROUTING_SCHEME_GOTVIEW 1
> #define PVR2_ROUTING_SCHEME_ONAIR 2
> #define PVR2_ROUTING_SCHEME_AV400 3
> +#define PVR2_ROUTING_SCHEME_HAUP160XXX 4
>
> #define PVR2_DIGITAL_SCHEME_NONE 0
> #define PVR2_DIGITAL_SCHEME_HAUPPAUGE 1
> diff --git a/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h b/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h
> index 0a01de4..640b033 100644
> --- a/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h
> +++ b/drivers/media/usb/pvrusb2/pvrusb2-fx2-cmd.h
> @@ -38,6 +38,10 @@
>
> #define FX2CMD_FWPOST1 0x52u
>
> +/* These 2 only exist on Model 160xxx */
> +#define FX2CMD_HCW_DEMOD_RESET_PIN 0xd4u
> +#define FX2CMD_HCW_MAKO_SLEEP_PIN 0xd5u
> +
> #define FX2CMD_POWER_OFF 0xdcu
> #define FX2CMD_POWER_ON 0xdeu
>
> diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
> index 446a999..ab9e822 100644
> --- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
> +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
> @@ -316,6 +316,8 @@ static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = {
> {FX2CMD_ONAIR_DTV_STREAMING_OFF, "onair dtv stream off"},
> {FX2CMD_ONAIR_DTV_POWER_ON, "onair dtv power on"},
> {FX2CMD_ONAIR_DTV_POWER_OFF, "onair dtv power off"},
> + {FX2CMD_HCW_DEMOD_RESET_PIN, "hcw demod reset pin"},
> + {FX2CMD_HCW_MAKO_SLEEP_PIN, "hcw mako sleep pin"},
> };
>
>
> @@ -2137,10 +2139,28 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
> ((0) << 16));
> }
>
> - // This step MUST happen after the earlier powerup step.
> + /* This step MUST happen after the earlier powerup step */
> pvr2_i2c_core_init(hdw);
> if (!pvr2_hdw_dev_ok(hdw)) return;
>
> + /* Reset demod only on Hauppauge 160xxx platform */
> + if (hdw->usb_dev->descriptor.idVendor == 0x2040 &&
> + (hdw->usb_dev->descriptor.idProduct == 0x7502 ||
> + hdw->usb_dev->descriptor.idProduct == 0x7510)) {
These need le16_to_cpu() else it will not work on big-endian machines.
> + pr_info("%s(): resetting 160xxx demod\n", __func__);
> + /* TODO: not sure this is proper place to reset once only */
> + pvr2_issue_simple_cmd(hdw,
> + FX2CMD_HCW_DEMOD_RESET_PIN |
> + (1 << 8) |
> + ((0) << 16));
> + msleep(10);
usleep_range() is preferred (for delays <= 10), I think. Maybe 10ms is too
long anyway and msleep(1) is enough.
> + pvr2_issue_simple_cmd(hdw,
> + FX2CMD_HCW_DEMOD_RESET_PIN |
> + (1 << 8) |
> + ((1) << 16));
> + msleep(10);
> + }
> +
> pvr2_hdw_load_modules(hdw);
> if (!pvr2_hdw_dev_ok(hdw)) return;
>
> @@ -4011,6 +4031,20 @@ int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
> static int pvr2_hdw_cmd_hcw_demod_reset(struct pvr2_hdw *hdw, int onoff)
> {
> hdw->flag_ok = !0;
> +
> + /* Use this for Hauppauge 160xxx only */
> + if (hdw->usb_dev->descriptor.idVendor == 0x2040 &&
> + (hdw->usb_dev->descriptor.idProduct == 0x7502 ||
> + hdw->usb_dev->descriptor.idProduct == 0x7510)) {
Same as above. le16_to_cpu() needed.
> + pr_debug("%s(): resetting demod on Hauppauge 160xxx platform skipped\n",
> + __func__);
> + /* Can't reset 160xxx or it will trash Demod tristate */
> + return pvr2_issue_simple_cmd(hdw,
> + FX2CMD_HCW_MAKO_SLEEP_PIN |
> + (1 << 8) |
> + ((onoff ? 1 : 0) << 16));
> + }
> +
> return pvr2_issue_simple_cmd(hdw,
> FX2CMD_HCW_DEMOD_RESETIN |
> (1 << 8) |
> --
> 2.7.4
