Re: [PATCH v4 1/3] media: dt-bindings: media: document allegro-dvt bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 27 Mar 2019 13:57:10 +0100, Hans Verkuil wrote:
> On 3/1/19 4:27 PM, Michael Tretter wrote:
> > Add device-tree bindings for the Allegro DVT video IP core found on the
> > Xilinx ZynqMP EV family.
> > 
> > Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
> > ---
> > v3 -> v4:
> > none
> > 
> > v2 -> v3:
> > - rename node to video-codec
> > - drop interrupt-names
> > - fix compatible in example
> > - add clocks to required properties
> > 
> > v1 -> v2:
> > none
> > ---
> >  .../devicetree/bindings/media/allegro.txt     | 43 +++++++++++++++++++
> >  1 file changed, 43 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/allegro.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/media/allegro.txt b/Documentation/devicetree/bindings/media/allegro.txt
> > new file mode 100644
> > index 000000000000..a92e2fbf26c9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/allegro.txt
> > @@ -0,0 +1,43 @@
> > +Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx
> > +ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265
> > +decoder ip core.
> > +
> > +Each actual codec engines is controlled by a microcontroller (MCU). Host
> > +software uses a provided mailbox interface to communicate with the MCU. The
> > +MCU share an interrupt.
> > +
> > +Required properties:
> > +  - compatible: value should be one of the following
> > +    "allegro,al5e-1.1", "allegro,al5e": encoder IP core
> > +    "allegro,al5d-1.1", "allegro,al5d": decoder IP core  
> 
> checkpatch give me:
> 
> WARNING: DT compatible string vendor "allegro" appears un-documented -- check ./Documentation/devicetree/bindings/vendor-prefixes.txt
> #2714: FILE: drivers/staging/media/allegro-dvt/allegro-core.c:2636:
> +       { .compatible = "allegro,al5e-1.1" },
> 
> I think you should probably replace allegro by xlnx.

The video-codec and the firmware is actually Allegro IP. Xilinx
integrated the IP cores into the SoC with their "VCU System-Level
Control" module, which uses the "xlnx,vcu" binding.

I would rather add "allegro" to the vendor-prefixes.txt than replacing
it with xlnx.

Michael

> 
> Regards,
> 
> 	Hans
> 
> > +  - reg: base and length of the memory mapped register region and base and
> > +    length of the memory mapped sram
> > +  - reg-names: must include "regs" and "sram"
> > +  - interrupts: shared interrupt from the MCUs to the processing system
> > +  - clocks: must contain an entry for each entry in clock-names
> > +  - clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk",
> > +    "m_axi_mcu_aclk", "s_axi_lite_aclk"
> > +
> > +Example:
> > +	al5e: video-codec@a0009000 {
> > +		compatible = "allegro,al5e-1.1", "allegro,al5e";
> > +		reg = <0 0xa0009000 0 0x1000>,
> > +		      <0 0xa0000000 0 0x8000>;
> > +		reg-names = "regs", "sram";
> > +		interrupts = <0 96 4>;
> > +		clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
> > +			 <&clkc 71>, <&clkc 71>, <&clkc 71>;
> > +		clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
> > +			      "m_axi_mcu_aclk", "s_axi_lite_aclk"
> > +	};
> > +	al5d: video-codec@a0029000 {
> > +		compatible = "allegro,al5d-1.1", "allegro,al5d";
> > +		reg = <0 0xa0029000 0 0x1000>,
> > +		      <0 0xa0020000 0 0x8000>;
> > +		reg-names = "regs", "sram";
> > +		interrupts = <0 96 4>;
> > +		clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
> > +			 <&clkc 71>, <&clkc 71>, <&clkc 71>;
> > +		clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
> > +			      "m_axi_mcu_aclk", "s_axi_lite_aclk"
> > +	};
> >   
> 
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux