On 3/15/19 1:43 PM, André Almeida wrote: > Change the scaling functions in order to scale planes. This change makes > easier to support multiplanar pixel formats. > > Signed-off-by: André Almeida <andrealmeid@xxxxxxxxxxxxx> > --- > drivers/media/platform/vimc/vimc-scaler.c | 110 ++++++++++++++-------- > 1 file changed, 69 insertions(+), 41 deletions(-) > > diff --git a/drivers/media/platform/vimc/vimc-scaler.c b/drivers/media/platform/vimc/vimc-scaler.c > index 65519495ecca..15fbb0914056 100644 > --- a/drivers/media/platform/vimc/vimc-scaler.c > +++ b/drivers/media/platform/vimc/vimc-scaler.c > @@ -35,10 +35,14 @@ MODULE_PARM_DESC(sca_mult, " the image size multiplier"); > #define IS_SRC(pad) (pad) > #define MAX_ZOOM 8 > > +/* TODO: enum only scalable formats */ why is this a TODO? Isn't what it is doing already? > static const u32 vimc_sca_supported_pixfmt[] = { > V4L2_PIX_FMT_BGR24, > V4L2_PIX_FMT_RGB24, > V4L2_PIX_FMT_ARGB32, > + V4L2_PIX_FMT_YUV420, > + V4L2_PIX_FMT_YUV420M, > + V4L2_PIX_FMT_NV12M, > }; > > struct vimc_sca_device { > @@ -51,8 +55,8 @@ struct vimc_sca_device { > struct v4l2_mbus_framefmt sink_fmt; > /* Values calculated when the stream starts */ > struct vimc_frame src_frame; > - unsigned int src_line_size; > - unsigned int bpp; > + unsigned int src_line_size[TPG_MAX_PLANES]; > + unsigned int bpp[TPG_MAX_PLANES]; > }; > > static const struct v4l2_mbus_framefmt sink_fmt_default = { > @@ -207,10 +211,10 @@ static const struct v4l2_subdev_pad_ops vimc_sca_pad_ops = { > static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable) > { > struct vimc_sca_device *vsca = v4l2_get_subdevdata(sd); > + unsigned int i; > > if (enable) { > u32 pixelformat = vsca->ved.stream->producer_pixfmt; > - const struct v4l2_format_info *pix_info; > unsigned int frame_size; > > if (!vimc_sca_is_pixfmt_supported(pixelformat)) { > @@ -219,32 +223,41 @@ static int vimc_sca_s_stream(struct v4l2_subdev *sd, int enable) > return -EINVAL; > } > > - /* Save the bytes per pixel of the sink */ > - pix_info = v4l2_format_info(pixelformat); > - vsca->bpp = pix_info->bpp[0]; > - > - /* Calculate the width in bytes of the src frame */ > - vsca->src_line_size = vsca->sink_fmt.width * > - sca_mult * vsca->bpp; > - > - /* Calculate the frame size of the source pad */ > - frame_size = vsca->src_line_size * vsca->sink_fmt.height * > - sca_mult; > - > - /* Allocate the frame buffer. Use vmalloc to be able to > - * allocate a large amount of memory > - */ > - vsca->src_frame.plane_addr[0] = vmalloc(frame_size); > - vsca->src_frame.sizeimage[0] = frame_size; > - if (!vsca->src_frame.plane_addr[0]) > - return -ENOMEM; > + vimc_fill_frame(&vsca->src_frame, pixelformat, > + vsca->sink_fmt.width, vsca->sink_fmt.height); > + > + for (i = 0; i < vsca->src_frame.num_planes; i++) { > + /* Save the bytes per pixel of the sink */ > + vsca->bpp[i] = vsca->src_frame.bpp[i]; > + > + /* Calculate the width in bytes of the src frame */ > + vsca->src_line_size[i] = > + vsca->src_frame.bytesperline[i] * sca_mult; > + > + /* Calculate the frame size of the source pad */ > + frame_size = vsca->src_frame.sizeimage[i] * > + sca_mult * sca_mult; > + > + /* Allocate the frame buffer. Use vmalloc to be able to > + * allocate a large amount of memory > + */ I know this comment was already like this, but could you please also correct the style of this comment? It should start with /* * Allocate ... Regards, Helen > + vsca->src_frame.plane_addr[i] = vmalloc(frame_size); > + if (!vsca->src_frame.plane_addr[i]) { > + for (i -= 1; i >= 0; i--) > + vfree(vsca->src_frame.plane_addr[i]); > + return -ENOMEM; > + } > + vsca->src_frame.sizeimage[i] = frame_size; > + } > > } else { > if (!vsca->src_frame.plane_addr[0]) > return 0; > > - vfree(vsca->src_frame.plane_addr[0]); > - vsca->src_frame.plane_addr[0] = NULL; > + for (i = 0; i < vsca->src_frame.num_planes; i++) { > + vfree(vsca->src_frame.plane_addr[i]); > + vsca->src_frame.plane_addr[i] = NULL; > + } > } > > return 0; > @@ -270,18 +283,19 @@ static void vimc_sca_fill_pix(u8 *const ptr, > ptr[i] = pixel[i]; > } > > -static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca, > +/* TODO: parallelize this function */ > +static void vimc_sca_scale_plane(const struct vimc_sca_device *const vsca, > const unsigned int lin, const unsigned int col, > - const u8 *const sink_frame) > + const struct vimc_frame *sink_frame, > + u8 num_plane, u32 width) > + > { > unsigned int i, j, index; > const u8 *pixel; > > /* Point to the pixel value in position (lin, col) in the sink frame */ > - index = VIMC_FRAME_INDEX(lin, col, > - vsca->sink_fmt.width, > - vsca->bpp); > - pixel = &sink_frame[index]; > + index = VIMC_FRAME_INDEX(lin, col, width, vsca->bpp[num_plane]); > + pixel = &sink_frame->plane_addr[num_plane][index]; > > dev_dbg(vsca->dev, > "sca: %s: --- scale_pix sink pos %dx%d, index %d ---\n", > @@ -291,7 +305,7 @@ static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca, > * in the scaled src frame > */ > index = VIMC_FRAME_INDEX(lin * sca_mult, col * sca_mult, > - vsca->sink_fmt.width * sca_mult, vsca->bpp); > + width * sca_mult, vsca->bpp[num_plane]); > > dev_dbg(vsca->dev, "sca: %s: scale_pix src pos %dx%d, index %d\n", > vsca->sd.name, lin * sca_mult, col * sca_mult, index); > @@ -301,32 +315,46 @@ static void vimc_sca_scale_pix(const struct vimc_sca_device *const vsca, > /* Iterate through each beginning of a > * pixel repetition in a line > */ > - for (j = 0; j < sca_mult * vsca->bpp; j += vsca->bpp) { > + unsigned int bpp = vsca->bpp[num_plane]; > + > + for (j = 0; j < sca_mult * bpp; j += bpp) { > dev_dbg(vsca->dev, > "sca: %s: sca: scale_pix src pos %d\n", > vsca->sd.name, index + j); > > /* copy the pixel to the position index + j */ > vimc_sca_fill_pix( > - &vsca->src_frame.plane_addr[0][index + j], > - pixel, vsca->bpp); > + &vsca->src_frame.plane_addr[num_plane][index + j], > + pixel, bpp); > } > > /* move the index to the next line */ > - index += vsca->src_line_size; > + index += vsca->src_line_size[num_plane]; > } > } > > static void vimc_sca_fill_src_frame(const struct vimc_sca_device *const vsca, > - const u8 *const sink_frame) > + const struct vimc_frame *sink_frame) > { > - unsigned int i, j; > + u32 i, j, width, height; > + unsigned int num_plane; > + const struct v4l2_format_info *info; > + > + info = v4l2_format_info(sink_frame->pixelformat); > > /* Scale each pixel from the original sink frame */ > /* TODO: implement scale down, only scale up is supported for now */ > - for (i = 0; i < vsca->sink_fmt.height; i++) > - for (j = 0; j < vsca->sink_fmt.width; j++) > - vimc_sca_scale_pix(vsca, i, j, sink_frame); > + for (num_plane = 0; num_plane < info->comp_planes; num_plane++) { > + width = vsca->sink_fmt.width / > + ((num_plane == 0) ? 1 : info->vdiv); > + height = vsca->sink_fmt.height / > + ((num_plane == 0) ? 1 : info->hdiv); > + > + for (i = 0; i < height; i++) > + for (j = 0; j < width; j++) > + vimc_sca_scale_plane(vsca, i, j, sink_frame, > + num_plane, width); > + } > } > > static struct vimc_frame *vimc_sca_process_frame(struct vimc_ent_device *ved, > @@ -339,7 +367,7 @@ static struct vimc_frame *vimc_sca_process_frame(struct vimc_ent_device *ved, > if (!ved->stream) > return ERR_PTR(-EINVAL); > > - vimc_sca_fill_src_frame(vsca, sink_frame->plane_addr[0]); > + vimc_sca_fill_src_frame(vsca, sink_frame); > > return &vsca->src_frame; > }; >