[PATCH 2/2] media: ov7670: don't access registers when the device is powered off

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Since commit 3d6a8fe25605 ("media: ov7670: hook s_power onto v4l2 core"),
the device is actually powered off while the video stream is stopped.

So now set_format and s_frame_interval could be called while the device
is powered off, but these callbacks try to change the register settings
at this time.

The frame format and framerate will be restored right after power-up, so
we can just postpone applying these changes at these callbacks if the
device is not powered up.

Fixes: 3d6a8fe25605 ("media: ov7670: hook s_power onto v4l2 core")
Cc: Lubomir Rintel <lkundrak@xxxxx>
Cc: Jonathan Corbet <corbet@xxxxxxx>
Cc: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
---
 drivers/media/i2c/ov7670.c | 31 ++++++++++++++++++++++++++-----
 1 file changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ov7670.c b/drivers/media/i2c/ov7670.c
index e65693c..44c3eed 100644
--- a/drivers/media/i2c/ov7670.c
+++ b/drivers/media/i2c/ov7670.c
@@ -864,7 +864,15 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
 	/* Recalculate frame rate */
 	ov7675_get_framerate(sd, tpf);
 
-	return ov7675_apply_framerate(sd);
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any changes to H/W at this time. Instead
+	 * the framerate will be restored right after power-up.
+	 */
+	if (info->on)
+		return ov7675_apply_framerate(sd);
+
+	return 0;
 }
 
 static void ov7670_get_framerate_legacy(struct v4l2_subdev *sd,
@@ -895,7 +903,16 @@ static int ov7670_set_framerate_legacy(struct v4l2_subdev *sd,
 	info->clkrc = (info->clkrc & 0x80) | div;
 	tpf->numerator = 1;
 	tpf->denominator = info->clock_speed / div;
-	return ov7670_write(sd, REG_CLKRC, info->clkrc);
+
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any changes to H/W at this time. Instead
+	 * the framerate will be restored right after power-up.
+	 */
+	if (info->on)
+		return ov7670_write(sd, REG_CLKRC, info->clkrc);
+
+	return 0;
 }
 
 /*
@@ -1105,9 +1122,13 @@ static int ov7670_set_fmt(struct v4l2_subdev *sd,
 	if (ret)
 		return ret;
 
-	ret = ov7670_apply_fmt(sd);
-	if (ret)
-		return ret;
+	/*
+	 * If the device is not powered up by the host driver do
+	 * not apply any changes to H/W at this time. Instead
+	 * the frame format will be restored right after power-up.
+	 */
+	if (info->on)
+		return ov7670_apply_fmt(sd);
 
 	return 0;
 }
-- 
2.7.4




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux