Hi Niklas,
Thank you for the patch.
On Sat, Mar 09, 2019 at 12:57:00AM +0100, Niklas Söderlund wrote:
> The latest datasheet (rev 1.50) updates the start procedure for V3M and
> E3. Update the driver to match these changes.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> Reviewed-by: Ulrich Hecht <uli+renesas@xxxxxxxx>
This matches the datasheet, so
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/platform/rcar-vin/rcar-csi2.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index d9b29dbbcc2949de..6be81d4839f35a0e 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -922,11 +922,11 @@ static int rcsi2_init_phtw_v3m_e3(struct rcar_csi2 *priv, unsigned int mbps)
> static int rcsi2_confirm_start_v3m_e3(struct rcar_csi2 *priv)
> {
> static const struct phtw_value step1[] = {
> - { .data = 0xed, .code = 0x34 },
> - { .data = 0xed, .code = 0x44 },
> - { .data = 0xed, .code = 0x54 },
> - { .data = 0xed, .code = 0x84 },
> - { .data = 0xed, .code = 0x94 },
> + { .data = 0xee, .code = 0x34 },
> + { .data = 0xee, .code = 0x44 },
> + { .data = 0xee, .code = 0x54 },
> + { .data = 0xee, .code = 0x84 },
> + { .data = 0xee, .code = 0x94 },
> { /* sentinel */ },
> };
>
--
Regards,
Laurent Pinchart
