Hi list,
this patch add support for lifeview fly dvb duo (hybrid card) on medion
laptop
what works : dvb and analogic tv
not tested : svideo, composite, radio (i am not the owner of this card)
this card uses gpio 22 for the mode switch between analogic and dvb
gpio settings should change when svideo , composite an radio will be
tested
Cheers,
Thomas
Signed-off-by : Thomas Genty <tomlohave@xxxxxxxxx>
diff -r cdcf089168df linux/drivers/media/video/saa7134/saa7134-cards.c
--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Sun Jan 17 20:42:47 2010 -0200
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Mon Jan 18 07:03:53 2010 +0100
@@ -5394,7 +5394,37 @@
.amux = LINE2,
},
},
-
+ [SAA7134_BOARD_FLYDVBTDUO_MEDION] = {
+ /* Thomas Genty <tomlohave@xxxxxxxxx> */
+ .name = "LifeView FlyDVB-T DUO Medion",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .gpiomask = 0x00200000,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = {{
+ .name = name_tv,
+ .vmux = 1,
+ .amux = TV,
+ .gpio = 0x200000,
+ .tv = 1,
+ },{
+ .name = name_comp1, /* Not tested */
+ .vmux = 3,
+ .amux = LINE1,
+ },{
+ .name = name_svideo, /* Not tested */
+ .vmux = 8,
+ .amux = LINE1,
+ }},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x000000, /* No tested */
+ },
+ },
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -6551,6 +6581,12 @@
.subdevice = 0x6655,
.driver_data = SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S,
}, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7133,
+ .subvendor = 0x5168,
+ .subdevice = 0x0307, /* LR307-N */
+ .driver_data = SAA7134_BOARD_FLYDVBTDUO_MEDION,
+ }, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -7318,6 +7354,7 @@
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
case SAA7134_BOARD_CREATIX_CTX953:
+ case SAA7134_BOARD_FLYDVBTDUO_MEDION:
{
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
diff -r cdcf089168df linux/drivers/media/video/saa7134/saa7134-dvb.c
--- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Sun Jan 17 20:42:47 2010 -0200
+++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Mon Jan 18 07:03:53 2010 +0100
@@ -825,6 +825,20 @@
.request_firmware = philips_tda1004x_request_firmware
};
+static struct tda1004x_config tda827x_flydvbtduo_medion_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch = 2,
+ .request_firmware = philips_tda1004x_request_firmware
+};
+
/* ------------------------------------------------------------------
* special case: this card uses saa713x GPIO22 for the mode switch
*/
@@ -1586,6 +1600,22 @@
&dtv1000s_tda18271_config);
}
break;
+ case SAA7134_BOARD_FLYDVBTDUO_MEDION:
+ /* this card uses saa713x GPIO22 for the mode switch */
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &tda827x_flydvbtduo_medion_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
+ tda827x_flydvbtduo_medion_config.tuner_address, &dev->i2c_adap,
+ &ads_duo_cfg) == NULL) {
+ wprintk("no tda827x tuner found at addr: %02x\n",
+ tda827x_flydvbtduo_medion_config.tuner_address);
+ goto dettach_frontend;
+ }
+ } else
+ wprintk("failed to attach tda10046\n");
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
diff -r cdcf089168df linux/drivers/media/video/saa7134/saa7134.h
--- a/linux/drivers/media/video/saa7134/saa7134.h Sun Jan 17 20:42:47 2010 -0200
+++ b/linux/drivers/media/video/saa7134/saa7134.h Mon Jan 18 07:03:53 2010 +0100
@@ -301,6 +301,7 @@
#define SAA7134_BOARD_ASUS_EUROPA_HYBRID 174
#define SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S 175
#define SAA7134_BOARD_BEHOLD_505RDS_MK3 176
+#define SAA7134_BOARD_FLYDVBTDUO_MEDION 177
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
