Le jeudi 07 mars 2019 à 18:03 +0800, Randy Li a écrit : > Although I really want to push those work after I added more codec > supports, but I found it is more urge to do those in v4l2 core framework and > userspace. > > I would use this driver to present the current problems, write down a > summary here and I would reply to those threads later to push forward. > > 1. Slice construction is a bad idea. I think I have said my reason in > the IRC and mail before, vp9 is always good example. > > And it would request the driver to update QP table/CABAC table every > slice. > > I would make something to describe a buffer with some addtional meta > data. > > But the current request API limit a buffer with associated with > an request buffer, which prevent sharing some sequence data, but it > still can solve some problems. I guess you are trying to make some argument here, but I don't really understand what you are referring to. Right now there is two concurrent drivers for the Rockchip, yours and Ezequiel. Ezequiel does not seem to have raised any blockers around any of this (yet). > > 2. Advantage DMA memory control. > I think I need to do some work at v4l2 core. > > 2.1 The DMA address of each planes. I have sent a mail before talked > about why multiple planes is necessary for the rockchip platform. And > it maybe required by the other platforms. > > 2.2 IOMMU resume > The most effective way to restore the decoder from critical error is > doing a restting by reset controller. > Which would leading its slave IOMMU reset at the same time. Then none of > those v4l2 buffers are mapping in the IOMMU. You can't invalidate application memory mapping in V4L2, this is generic to V4L2 interface. If you still need to do this, you'll have to tell user-space through the SRC_CHANGE event, forcing a reconfiguration hence a reallocation of the buffers. Then your driver would be responsible for caching the allocation in order to not introduce delays. The framework does not prevent you from doing so, but yet, this is likely difficult. > > 3. H.264 and HEVC header > I still think those structure have some not necessary fileds in dpb or > reference part, which I don't think hardware decoder would care about > that or can be predict from the other information. This was discussed during the review, but all the information in there exist in the in the slice headers bitstream. There is no reason some information should not be made available to the driver, used or not. This is the only way we can guaranty that we won't prevent other HW to be integrated in the future. This is specially needed for H264_SLICE_RAW format used by Allwinner. In Ezequiel H264 decoder patchset for Rockchip HW, the format is H264_SLICE_ANNEX_B, of course in this format one could always do a bit of parsing in the kernel, but we don't want that really. That being said, I'd like to remind that we don't expose the control publicly yet, these are still unstable. We will freeze these after drivers get added to mainline and are considered stable. > > I would join to talk later. > > 4. The work flow of V4L2 > I need a method to prepare the register set before the device acutally > begin the transaction. Which is necessary for those high frame rate usecase. Can't you just increase the buffer queue size ? Then prepare the buffers on application thread, and process on another or something. This seems like driver specific, not an API thing. > > Also it is useful for those device would share some hardware resources > with the other device and it can save more power. > > I think I need to do some work at v4l2 core. Seems all possible to optimize, imho, we should aim at getting a working driver into mainline first and then progressively tweak it to gain best performance. The driver and userspace need complete re- implementation, and it won't happen all in one pass. I'm sure there is multiple years of effort, and multiple iterations on the vendor kernel and userspace. We can learn from that, but my point is that we are not yet at a stage where we should focus on driver specific optimization. From what you have said so far, I haven't found anything for which the kernel interface that is being merged would prevent doing the suggested optimization. Instead I read you as some of the interface decision will require a bit more work for this specific driver. This is often the tradeoff we have to do to make sure we can expose generically usable interface. And that's likely why mainline drivers are often a tad more complex then their vendor equivalent. > > Randy Li (6): > arm64: dts: rockchip: add power domain to iommu > staging: video: rockchip: add v4l2 decoder > [TEST]: rockchip: mpp: support qptable > staging: video: rockchip: add video codec > arm64: dts: rockchip: boost clocks for rk3328 > arm64: dts: rockchip: add video codec for rk3328 > > .../arm64/boot/dts/rockchip/rk3328-rock64.dts | 32 + > arch/arm64/boot/dts/rockchip/rk3328.dtsi | 116 +- > arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 + > drivers/staging/Kconfig | 2 + > drivers/staging/Makefile | 1 + > drivers/staging/rockchip-mpp/Kconfig | 34 + > drivers/staging/rockchip-mpp/Makefile | 10 + > drivers/staging/rockchip-mpp/mpp_debug.h | 87 ++ > drivers/staging/rockchip-mpp/mpp_dev_common.c | 1367 +++++++++++++++++ > drivers/staging/rockchip-mpp/mpp_dev_common.h | 212 +++ > drivers/staging/rockchip-mpp/mpp_dev_rkvdec.c | 997 ++++++++++++ > drivers/staging/rockchip-mpp/mpp_dev_vdpu2.c | 619 ++++++++ > drivers/staging/rockchip-mpp/mpp_service.c | 197 +++ > drivers/staging/rockchip-mpp/mpp_service.h | 38 + > drivers/staging/rockchip-mpp/rkvdec/hal.h | 63 + > drivers/staging/rockchip-mpp/rkvdec/hevc.c | 166 ++ > drivers/staging/rockchip-mpp/rkvdec/regs.h | 608 ++++++++ > drivers/staging/rockchip-mpp/vdpu2/hal.h | 52 + > drivers/staging/rockchip-mpp/vdpu2/mpeg2.c | 277 ++++ > drivers/staging/rockchip-mpp/vdpu2/regs.h | 699 +++++++++ > 20 files changed, 5575 insertions(+), 4 deletions(-) > create mode 100644 drivers/staging/rockchip-mpp/Kconfig > create mode 100644 drivers/staging/rockchip-mpp/Makefile > create mode 100644 drivers/staging/rockchip-mpp/mpp_debug.h > create mode 100644 drivers/staging/rockchip-mpp/mpp_dev_common.c > create mode 100644 drivers/staging/rockchip-mpp/mpp_dev_common.h > create mode 100644 drivers/staging/rockchip-mpp/mpp_dev_rkvdec.c > create mode 100644 drivers/staging/rockchip-mpp/mpp_dev_vdpu2.c > create mode 100644 drivers/staging/rockchip-mpp/mpp_service.c > create mode 100644 drivers/staging/rockchip-mpp/mpp_service.h > create mode 100644 drivers/staging/rockchip-mpp/rkvdec/hal.h > create mode 100644 drivers/staging/rockchip-mpp/rkvdec/hevc.c > create mode 100644 drivers/staging/rockchip-mpp/rkvdec/regs.h > create mode 100644 drivers/staging/rockchip-mpp/vdpu2/hal.h > create mode 100644 drivers/staging/rockchip-mpp/vdpu2/mpeg2.c > create mode 100644 drivers/staging/rockchip-mpp/vdpu2/regs.h >
Attachment:
signature.asc
Description: This is a digitally signed message part
