Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
drivers/media/tuners/mxl5005s.c | 2 +-
drivers/media/tuners/qm1d1b0004.h | 2 +-
drivers/media/tuners/r820t.c | 4 ++--
drivers/media/tuners/tda18271-common.c | 10 +++++-----
drivers/media/tuners/tda18271-fe.c | 2 +-
drivers/media/tuners/tda18271.h | 4 ++--
drivers/media/tuners/xc4000.c | 4 ++--
7 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/media/tuners/mxl5005s.c b/drivers/media/tuners/mxl5005s.c
index ec584316c812..1c07e2225fb3 100644
--- a/drivers/media/tuners/mxl5005s.c
+++ b/drivers/media/tuners/mxl5005s.c
@@ -3584,7 +3584,7 @@ static u32 MXL_Ceiling(u32 value, u32 resolution)
return value / resolution + (value % resolution > 0 ? 1 : 0);
}
-/* Retrieve the Initialzation Registers */
+/* Retrieve the Initialization Registers */
static u16 MXL_GetInitRegister(struct dvb_frontend *fe, u8 *RegNum,
u8 *RegVal, int *count)
{
diff --git a/drivers/media/tuners/qm1d1b0004.h b/drivers/media/tuners/qm1d1b0004.h
index 7734ed109a22..7950ecd56430 100644
--- a/drivers/media/tuners/qm1d1b0004.h
+++ b/drivers/media/tuners/qm1d1b0004.h
@@ -14,7 +14,7 @@ struct qm1d1b0004_config {
struct dvb_frontend *fe;
u32 lpf_freq; /* LPF frequency[kHz]. Default: symbol rate */
- bool half_step; /* use PLL frequency step of 500Hz istead of 1000Hz */
+ bool half_step; /* use PLL frequency step of 500Hz instead of 1000Hz */
};
/* special values indicating to use the default in qm1d1b0004_config */
diff --git a/drivers/media/tuners/r820t.c b/drivers/media/tuners/r820t.c
index ba4be08a8551..aed2f130ec74 100644
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -1664,7 +1664,7 @@ static int r820t_iq_tree(struct r820t_priv *priv,
/*
* record IMC results by input gain/phase location then adjust
- * gain or phase positive 1 step and negtive 1 step,
+ * gain or phase positive 1 step and negative 1 step,
* both record results
*/
@@ -2066,7 +2066,7 @@ static int r820t_imr_callibrate(struct r820t_priv *priv)
}
/*
- * Disables IMR callibration. That emulates the same behaviour
+ * Disables IMR calibration. That emulates the same behaviour
* as what is done by rtl-sdr userspace library. Useful for testing
*/
if (no_imr_cal) {
diff --git a/drivers/media/tuners/tda18271-common.c b/drivers/media/tuners/tda18271-common.c
index 054b3b747dae..d46a2e775e82 100644
--- a/drivers/media/tuners/tda18271-common.c
+++ b/drivers/media/tuners/tda18271-common.c
@@ -528,14 +528,14 @@ int tda18271_init_regs(struct dvb_frontend *fe)
* Standby modes, EP3 [7:5]
*
* | SM || SM_LT || SM_XT || mode description
- * |=====\\=======\\=======\\===================================
+ * |=====\\=======\\=======\\====================================
* | 0 || 0 || 0 || normal mode
- * |-----||-------||-------||-----------------------------------
+ * |-----||-------||-------||------------------------------------
* | || || || standby mode w/ slave tuner output
- * | 1 || 0 || 0 || & loop thru & xtal oscillator on
- * |-----||-------||-------||-----------------------------------
+ * | 1 || 0 || 0 || & loop through & xtal oscillator on
+ * |-----||-------||-------||------------------------------------
* | 1 || 1 || 0 || standby mode w/ xtal oscillator on
- * |-----||-------||-------||-----------------------------------
+ * |-----||-------||-------||------------------------------------
* | 1 || 1 || 1 || power off
*
*/
diff --git a/drivers/media/tuners/tda18271-fe.c b/drivers/media/tuners/tda18271-fe.c
index 4d69029229e4..cac6b8e62b73 100644
--- a/drivers/media/tuners/tda18271-fe.c
+++ b/drivers/media/tuners/tda18271-fe.c
@@ -48,7 +48,7 @@ static int tda18271_toggle_output(struct dvb_frontend *fe, int standby)
if (tda_fail(ret))
goto fail;
- tda_dbg("%s mode: xtal oscillator %s, slave tuner loop thru %s\n",
+ tda_dbg("%s mode: xtal oscillator %s, slave tuner loop through %s\n",
standby ? "standby" : "active",
priv->output_opt & TDA18271_OUTPUT_XT_OFF ? "off" : "on",
priv->output_opt & TDA18271_OUTPUT_LT_OFF ? "off" : "on");
diff --git a/drivers/media/tuners/tda18271.h b/drivers/media/tuners/tda18271.h
index 7e07966c5ace..1a23532586ef 100644
--- a/drivers/media/tuners/tda18271.h
+++ b/drivers/media/tuners/tda18271.h
@@ -69,10 +69,10 @@ enum tda18271_i2c_gate {
};
enum tda18271_output_options {
- /* slave tuner output & loop thru & xtal oscillator always on */
+ /* slave tuner output & loop through & xtal oscillator always on */
TDA18271_OUTPUT_LT_XT_ON = 0,
- /* slave tuner output loop thru off */
+ /* slave tuner output loop through off */
TDA18271_OUTPUT_LT_OFF = 1,
/* xtal oscillator off */
diff --git a/drivers/media/tuners/xc4000.c b/drivers/media/tuners/xc4000.c
index eb6d65dae748..a351390ee744 100644
--- a/drivers/media/tuners/xc4000.c
+++ b/drivers/media/tuners/xc4000.c
@@ -1471,8 +1471,8 @@ static int xc4000_get_signal(struct dvb_frontend *fe, u16 *strength)
if (rc < 0)
goto ret;
- /* Informations from real testing of DVB-T and radio part,
- coeficient for one dB is 0xff.
+ /* Information from real testing of DVB-T and radio part,
+ coefficient for one dB is 0xff.
*/
tuner_dbg("Signal strength: -%ddB (%05d)\n", value >> 8, value);
--
2.20.1
