On 15 января 2010 11:15:26 paul10@xxxxxxxxxxxx wrote: > I bought a DVB-S card to attach to my mythtv setup. I knew it was perhaps > not going to work, and I only spent $15 on it. However, based on the info > the guy on eBay provided, it had a pci address of 195d:1105, which I could > see some people had cards that were working. > > The card itself is a no-name jobby. I can see the DM1105 chip on it, I > can't see any other chips with any significant pin count (lots with 3 - 8 > pins, but nothing with enough to be important). There is a metal case > around the connectors that might be hiding a frontend chip of some sort, > but it doesn't seem to have enough connectors in and out to be doing much > that is important beyond just providing connectivity to the LNB. > > I've got the latest kernel (2.6.33-rc4) and I've checked the code and it > looks like the latest DM1105 code. When booting I get: > > [ 9.766188] dm1105 0000:06:00.0: PCI INT A -> GSI 20 (level, low) -> > IRQ 20 > [ 10.047331] dm1105 0000:06:00.0: MAC 00:00:00:00:00:00 > [ 12.464628] dm1105 0000:06:00.0: could not attach frontend > [ 12.479830] dm1105 0000:06:00.0: PCI INT A disabled > > With lspci -vv I get: > 06:00.0 Ethernet controller: Device 195d:1105 (rev 10) > Subsystem: Device 195d:1105 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 20 > Region 0: I/O ports at b000 [size=256] > > No DVB devices are created. > > I see from other people using a card with this chipset that there probably > would be a tuner/frontend as well as the DM1105. I've also tried card=5 in > the insmod parameters. > > It seems to me that the card probably has a tuner/frontend on id different > from the Axess board, but I'm not sure how I'd work out what that is. Is > it possible that it doesn't have any chips on it other than the DM1105? > Should I take the board apart a bit to find out? > > Thanks, > > Paul > Hi Paul, Frontend/tuner must lay under cover. Subsystem: Device 195d:1105 indicates that there is no EEPROM in card. If you send some links/pictures/photos then it would helped a lot. Is there a disk with drivers for Windows? Also I know about dm1105 based cards with tda10086 demod, those are not supported in the driver yet. BR Igor -- Igor M. Liplianin Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html