Hi everyone,
On Mon, Jan 28, 2019 at 01:20:37PM +0530, Jagan Teki wrote:
> On Fri, Jan 25, 2019 at 9:10 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> >
> > On Thu, Jan 24, 2019 at 11:28:01PM +0530, Jagan Teki wrote:
> > > The ov5640_try_frame_interval operation updates the FPS as per user
> > > input based on default ov5640_frame_rate, OV5640_30_FPS which is failed
> > > to update when user trigger 15fps.
> > >
> > > So, initialize the default ov5640_frame_rate to OV5640_15_FPS so-that
> > > it can satisfy to update all fps.
> > >
> > > Fixes: 5a3ad937bc78 ("media: ov5640: Make the return rate type more explicit")
> > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> >
> > I'm pretty sure I tested this and it was working fine. You're
> > mentionning a regression, but what regression is there exactly (ie,
> > what was working before that commit that doesn't work anymore?). What
> > tools/commands are you using to see this behaviour?
>
I think Jagan's right, here.
For the 15FPS use case, the below condition in the for loop of
ov5640_try_frame_interval() never gets satisfied (0 < 0 ?) and 'rate' retains
its initial value of 30FPS.
if (abs(curr_fps - fps) < abs(best_fps - fps)) {
best_fps = curr_fps;
rate = i;
}
To make more clear what's happening, I would initialize 'rate' just
before 'best_fps' before the for loop. Anyway, please add:
Acked-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
Maxime, does this make sense to you?
Thanks
j
> In fact I have mentioned this on your v9 [1], may be you missed it.
>
> I have reproduced with media-ctl, below is the full log. let me know
> if I still miss anything.
>
> Before this change:
> # media-ctl -p
> Media controller API version 5.0.0
>
> Media device information
> ------------------------
> driver sun6i-csi
> model Allwinner Video Capture Device
> serial
> bus info
> hw revision 0x0
> driver version 5.0.0
>
> Device topology
> - entity 1: sun6i-csi (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video0
> pad0: Sink
> <- "ov5640 1-003c":0 [ENABLED,IMMUTABLE]
>
> - entity 5: ov5640 1-003c (1 pad, 1 link)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev0
> pad0: Source
> [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb
> xfer:srgb ycbcr:601 quantization:full-range]
> -> "sun6i-csi":0 [ENABLED,IMMUTABLE]
>
> # media-ctl --set-v4l2 "'ov5640 1-003c':0[fmt:UYVY8_2X8/640x480@1/15 field:none]
> "
> # media-ctl -p
> Media controller API version 5.0.0
>
> Media device information
> ------------------------
> driver sun6i-csi
> model Allwinner Video Capture Device
> serial
> bus info
> hw revision 0x0
> driver version 5.0.0
>
> Device topology
> - entity 1: sun6i-csi (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video0
> pad0: Sink
> <- "ov5640 1-003c":0 [ENABLED,IMMUTABLE]
>
> - entity 5: ov5640 1-003c (1 pad, 1 link)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev0
> pad0: Source
> [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb
> xfer:srgb ycbcr:601 quantization:full-range]
> -> "sun6i-csi":0 [ENABLED,IMMUTABLE]
>
>
> After this change:
> # media-ctl -p
> Media controller API version 5.0.0
>
> Media device information
> ------------------------
> driver sun6i-csi
> model Allwinner Video Capture Device
> serial
> bus info
> hw revision 0x0
> driver version 5.0.0
>
> Device topology
> - entity 1: sun6i-csi (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video0
> pad0: Sink
> <- "ov5640 1-003c":0 [ENABLED,IMMUTABLE]
>
> - entity 5: ov5640 1-003c (1 pad, 1 link)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev0
> pad0: Source
> [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb
> xfer:srgb ycbcr:601 quantization:full-range]
> -> "sun6i-csi":0 [ENABLED,IMMUTABLE]
>
> # media-ctl --set-v4l2 "'ov5640 1-003c':0[fmt:UYVY8_2X8/640x480@1/15 field:none]
> "
> # media-ctl -p
> Media controller API version 5.0.0
>
> Media device information
> ------------------------
> driver sun6i-csi
> model Allwinner Video Capture Device
> serial
> bus info
> hw revision 0x0
> driver version 5.0.0
>
> Device topology
> - entity 1: sun6i-csi (1 pad, 1 link)
> type Node subtype V4L flags 0
> device node name /dev/video0
> pad0: Sink
> <- "ov5640 1-003c":0 [ENABLED,IMMUTABLE]
>
> - entity 5: ov5640 1-003c (1 pad, 1 link)
> type V4L2 subdev subtype Sensor flags 0
> device node name /dev/v4l-subdev0
> pad0: Source
> [fmt:UYVY8_2X8/640x480@1/15 field:none colorspace:srgb
> xfer:srgb ycbcr:601 quantization:full-range]
> -> "sun6i-csi":0 [ENABLED,IMMUTABLE]
>
> [1] https://patchwork.kernel.org/patch/10708931/
Attachment:
signature.asc
Description: PGP signature
