[PATCH 2/8] soc_mt9t112: remove obsolete sensor driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>

This driver got converted to not depend on soc_camera in commit
6a26f141bf62 ("media: i2c: mt9t112: Remove soc_camera dependencies").

There's no sense in keeping the old version there.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
---
 drivers/media/i2c/soc_camera/Kconfig       |    6 -
 drivers/media/i2c/soc_camera/Makefile      |    1 -
 drivers/media/i2c/soc_camera/soc_mt9t112.c | 1157 --------------------
 3 files changed, 1164 deletions(-)
 delete mode 100644 drivers/media/i2c/soc_camera/soc_mt9t112.c

diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig
index f67499187bda..773d067c44a3 100644
--- a/drivers/media/i2c/soc_camera/Kconfig
+++ b/drivers/media/i2c/soc_camera/Kconfig
@@ -17,12 +17,6 @@ config SOC_CAMERA_MT9M111
 	  This is the legacy configuration which shouldn't be used anymore,
 	  while VIDEO_MT9M111 should be used instead.
 
-config SOC_CAMERA_MT9T112
-	tristate "mt9t112 support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This driver supports MT9T112 cameras from Aptina.
-
 config SOC_CAMERA_MT9V022
 	tristate "mt9v022 and mt9v024 support"
 	depends on SOC_CAMERA && I2C
diff --git a/drivers/media/i2c/soc_camera/Makefile b/drivers/media/i2c/soc_camera/Makefile
index 0d15864cfda8..ea8da4074a01 100644
--- a/drivers/media/i2c/soc_camera/Makefile
+++ b/drivers/media/i2c/soc_camera/Makefile
@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= soc_mt9m001.o
-obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= soc_mt9t112.o
 obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= soc_mt9v022.o
 obj-$(CONFIG_SOC_CAMERA_OV5642)		+= soc_ov5642.o
 obj-$(CONFIG_SOC_CAMERA_OV772X)		+= soc_ov772x.o
diff --git a/drivers/media/i2c/soc_camera/soc_mt9t112.c b/drivers/media/i2c/soc_camera/soc_mt9t112.c
deleted file mode 100644
index ea1ff270bc2d..000000000000
--- a/drivers/media/i2c/soc_camera/soc_mt9t112.c
+++ /dev/null
@@ -1,1157 +0,0 @@
-/*
- * mt9t112 Camera Driver
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- * Kuninori Morimoto <morimoto.kuninori@xxxxxxxxxxx>
- *
- * Based on ov772x driver, mt9m111 driver,
- *
- * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@xxxxxxxxxxx>
- * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@xxxxxxx>
- * Copyright 2006-7 Jonathan Corbet <corbet@xxxxxxx>
- * Copyright (C) 2008 Magnus Damm
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@xxxxxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/v4l2-mediabus.h>
-#include <linux/videodev2.h>
-
-#include <media/i2c/mt9t112.h>
-#include <media/soc_camera.h>
-#include <media/v4l2-clk.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-image-sizes.h>
-
-/* you can check PLL/clock info */
-/* #define EXT_CLOCK 24000000 */
-
-/************************************************************************
-			macro
-************************************************************************/
-/*
- * frame size
- */
-#define MAX_WIDTH   2048
-#define MAX_HEIGHT  1536
-
-/*
- * macro of read/write
- */
-#define ECHECKER(ret, x)		\
-	do {				\
-		(ret) = (x);		\
-		if ((ret) < 0)		\
-			return (ret);	\
-	} while (0)
-
-#define mt9t112_reg_write(ret, client, a, b) \
-	ECHECKER(ret, __mt9t112_reg_write(client, a, b))
-#define mt9t112_mcu_write(ret, client, a, b) \
-	ECHECKER(ret, __mt9t112_mcu_write(client, a, b))
-
-#define mt9t112_reg_mask_set(ret, client, a, b, c) \
-	ECHECKER(ret, __mt9t112_reg_mask_set(client, a, b, c))
-#define mt9t112_mcu_mask_set(ret, client, a, b, c) \
-	ECHECKER(ret, __mt9t112_mcu_mask_set(client, a, b, c))
-
-#define mt9t112_reg_read(ret, client, a) \
-	ECHECKER(ret, __mt9t112_reg_read(client, a))
-
-/*
- * Logical address
- */
-#define _VAR(id, offset, base)	(base | (id & 0x1f) << 10 | (offset & 0x3ff))
-#define VAR(id, offset)  _VAR(id, offset, 0x0000)
-#define VAR8(id, offset) _VAR(id, offset, 0x8000)
-
-/************************************************************************
-			struct
-************************************************************************/
-struct mt9t112_format {
-	u32 code;
-	enum v4l2_colorspace colorspace;
-	u16 fmt;
-	u16 order;
-};
-
-struct mt9t112_priv {
-	struct v4l2_subdev		 subdev;
-	struct mt9t112_platform_data	*info;
-	struct i2c_client		*client;
-	struct v4l2_rect		 frame;
-	struct v4l2_clk			*clk;
-	const struct mt9t112_format	*format;
-	int				 num_formats;
-	u32				 flags;
-/* for flags */
-#define INIT_DONE	(1 << 0)
-#define PCLK_RISING	(1 << 1)
-};
-
-/************************************************************************
-			supported format
-************************************************************************/
-
-static const struct mt9t112_format mt9t112_cfmts[] = {
-	{
-		.code		= MEDIA_BUS_FMT_UYVY8_2X8,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.fmt		= 1,
-		.order		= 0,
-	}, {
-		.code		= MEDIA_BUS_FMT_VYUY8_2X8,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.fmt		= 1,
-		.order		= 1,
-	}, {
-		.code		= MEDIA_BUS_FMT_YUYV8_2X8,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.fmt		= 1,
-		.order		= 2,
-	}, {
-		.code		= MEDIA_BUS_FMT_YVYU8_2X8,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.fmt		= 1,
-		.order		= 3,
-	}, {
-		.code		= MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.fmt		= 8,
-		.order		= 2,
-	}, {
-		.code		= MEDIA_BUS_FMT_RGB565_2X8_LE,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.fmt		= 4,
-		.order		= 2,
-	},
-};
-
-/************************************************************************
-			general function
-************************************************************************/
-static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client)
-{
-	return container_of(i2c_get_clientdata(client),
-			    struct mt9t112_priv,
-			    subdev);
-}
-
-static int __mt9t112_reg_read(const struct i2c_client *client, u16 command)
-{
-	struct i2c_msg msg[2];
-	u8 buf[2];
-	int ret;
-
-	command = swab16(command);
-
-	msg[0].addr  = client->addr;
-	msg[0].flags = 0;
-	msg[0].len   = 2;
-	msg[0].buf   = (u8 *)&command;
-
-	msg[1].addr  = client->addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].len   = 2;
-	msg[1].buf   = buf;
-
-	/*
-	 * if return value of this function is < 0,
-	 * it mean error.
-	 * else, under 16bit is valid data.
-	 */
-	ret = i2c_transfer(client->adapter, msg, 2);
-	if (ret < 0)
-		return ret;
-
-	memcpy(&ret, buf, 2);
-	return swab16(ret);
-}
-
-static int __mt9t112_reg_write(const struct i2c_client *client,
-			       u16 command, u16 data)
-{
-	struct i2c_msg msg;
-	u8 buf[4];
-	int ret;
-
-	command = swab16(command);
-	data = swab16(data);
-
-	memcpy(buf + 0, &command, 2);
-	memcpy(buf + 2, &data,    2);
-
-	msg.addr  = client->addr;
-	msg.flags = 0;
-	msg.len   = 4;
-	msg.buf   = buf;
-
-	/*
-	 * i2c_transfer return message length,
-	 * but this function should return 0 if correct case
-	 */
-	ret = i2c_transfer(client->adapter, &msg, 1);
-	if (ret >= 0)
-		ret = 0;
-
-	return ret;
-}
-
-static int __mt9t112_reg_mask_set(const struct i2c_client *client,
-				  u16  command,
-				  u16  mask,
-				  u16  set)
-{
-	int val = __mt9t112_reg_read(client, command);
-	if (val < 0)
-		return val;
-
-	val &= ~mask;
-	val |= set & mask;
-
-	return __mt9t112_reg_write(client, command, val);
-}
-
-/* mcu access */
-static int __mt9t112_mcu_read(const struct i2c_client *client, u16 command)
-{
-	int ret;
-
-	ret = __mt9t112_reg_write(client, 0x098E, command);
-	if (ret < 0)
-		return ret;
-
-	return __mt9t112_reg_read(client, 0x0990);
-}
-
-static int __mt9t112_mcu_write(const struct i2c_client *client,
-			       u16 command, u16 data)
-{
-	int ret;
-
-	ret = __mt9t112_reg_write(client, 0x098E, command);
-	if (ret < 0)
-		return ret;
-
-	return __mt9t112_reg_write(client, 0x0990, data);
-}
-
-static int __mt9t112_mcu_mask_set(const struct i2c_client *client,
-				  u16  command,
-				  u16  mask,
-				  u16  set)
-{
-	int val = __mt9t112_mcu_read(client, command);
-	if (val < 0)
-		return val;
-
-	val &= ~mask;
-	val |= set & mask;
-
-	return __mt9t112_mcu_write(client, command, val);
-}
-
-static int mt9t112_reset(const struct i2c_client *client)
-{
-	int ret;
-
-	mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0001);
-	msleep(1);
-	mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0000);
-
-	return ret;
-}
-
-#ifndef EXT_CLOCK
-#define CLOCK_INFO(a, b)
-#else
-#define CLOCK_INFO(a, b) mt9t112_clock_info(a, b)
-static int mt9t112_clock_info(const struct i2c_client *client, u32 ext)
-{
-	int m, n, p1, p2, p3, p4, p5, p6, p7;
-	u32 vco, clk;
-	char *enable;
-
-	ext /= 1000; /* kbyte order */
-
-	mt9t112_reg_read(n, client, 0x0012);
-	p1 = n & 0x000f;
-	n = n >> 4;
-	p2 = n & 0x000f;
-	n = n >> 4;
-	p3 = n & 0x000f;
-
-	mt9t112_reg_read(n, client, 0x002a);
-	p4 = n & 0x000f;
-	n = n >> 4;
-	p5 = n & 0x000f;
-	n = n >> 4;
-	p6 = n & 0x000f;
-
-	mt9t112_reg_read(n, client, 0x002c);
-	p7 = n & 0x000f;
-
-	mt9t112_reg_read(n, client, 0x0010);
-	m = n & 0x00ff;
-	n = (n >> 8) & 0x003f;
-
-	enable = ((6000 > ext) || (54000 < ext)) ? "X" : "";
-	dev_dbg(&client->dev, "EXTCLK          : %10u K %s\n", ext, enable);
-
-	vco = 2 * m * ext / (n+1);
-	enable = ((384000 > vco) || (768000 < vco)) ? "X" : "";
-	dev_dbg(&client->dev, "VCO             : %10u K %s\n", vco, enable);
-
-	clk = vco / (p1+1) / (p2+1);
-	enable = (96000 < clk) ? "X" : "";
-	dev_dbg(&client->dev, "PIXCLK          : %10u K %s\n", clk, enable);
-
-	clk = vco / (p3+1);
-	enable = (768000 < clk) ? "X" : "";
-	dev_dbg(&client->dev, "MIPICLK         : %10u K %s\n", clk, enable);
-
-	clk = vco / (p6+1);
-	enable = (96000 < clk) ? "X" : "";
-	dev_dbg(&client->dev, "MCU CLK         : %10u K %s\n", clk, enable);
-
-	clk = vco / (p5+1);
-	enable = (54000 < clk) ? "X" : "";
-	dev_dbg(&client->dev, "SOC CLK         : %10u K %s\n", clk, enable);
-
-	clk = vco / (p4+1);
-	enable = (70000 < clk) ? "X" : "";
-	dev_dbg(&client->dev, "Sensor CLK      : %10u K %s\n", clk, enable);
-
-	clk = vco / (p7+1);
-	dev_dbg(&client->dev, "External sensor : %10u K\n", clk);
-
-	clk = ext / (n+1);
-	enable = ((2000 > clk) || (24000 < clk)) ? "X" : "";
-	dev_dbg(&client->dev, "PFD             : %10u K %s\n", clk, enable);
-
-	return 0;
-}
-#endif
-
-static void mt9t112_frame_check(u32 *width, u32 *height, u32 *left, u32 *top)
-{
-	soc_camera_limit_side(left, width, 0, 0, MAX_WIDTH);
-	soc_camera_limit_side(top, height, 0, 0, MAX_HEIGHT);
-}
-
-static int mt9t112_set_a_frame_size(const struct i2c_client *client,
-				   u16 width,
-				   u16 height)
-{
-	int ret;
-	u16 wstart = (MAX_WIDTH - width) / 2;
-	u16 hstart = (MAX_HEIGHT - height) / 2;
-
-	/* (Context A) Image Width/Height */
-	mt9t112_mcu_write(ret, client, VAR(26, 0), width);
-	mt9t112_mcu_write(ret, client, VAR(26, 2), height);
-
-	/* (Context A) Output Width/Height */
-	mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + width);
-	mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + height);
-
-	/* (Context A) Start Row/Column */
-	mt9t112_mcu_write(ret, client, VAR(18, 2), 4 + hstart);
-	mt9t112_mcu_write(ret, client, VAR(18, 4), 4 + wstart);
-
-	/* (Context A) End Row/Column */
-	mt9t112_mcu_write(ret, client, VAR(18, 6), 11 + height + hstart);
-	mt9t112_mcu_write(ret, client, VAR(18, 8), 11 + width  + wstart);
-
-	mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
-
-	return ret;
-}
-
-static int mt9t112_set_pll_dividers(const struct i2c_client *client,
-				    u8 m, u8 n,
-				    u8 p1, u8 p2, u8 p3,
-				    u8 p4, u8 p5, u8 p6,
-				    u8 p7)
-{
-	int ret;
-	u16 val;
-
-	/* N/M */
-	val = (n << 8) |
-	      (m << 0);
-	mt9t112_reg_mask_set(ret, client, 0x0010, 0x3fff, val);
-
-	/* P1/P2/P3 */
-	val = ((p3 & 0x0F) << 8) |
-	      ((p2 & 0x0F) << 4) |
-	      ((p1 & 0x0F) << 0);
-	mt9t112_reg_mask_set(ret, client, 0x0012, 0x0fff, val);
-
-	/* P4/P5/P6 */
-	val = (0x7         << 12) |
-	      ((p6 & 0x0F) <<  8) |
-	      ((p5 & 0x0F) <<  4) |
-	      ((p4 & 0x0F) <<  0);
-	mt9t112_reg_mask_set(ret, client, 0x002A, 0x7fff, val);
-
-	/* P7 */
-	val = (0x1         << 12) |
-	      ((p7 & 0x0F) <<  0);
-	mt9t112_reg_mask_set(ret, client, 0x002C, 0x100f, val);
-
-	return ret;
-}
-
-static int mt9t112_init_pll(const struct i2c_client *client)
-{
-	struct mt9t112_priv *priv = to_mt9t112(client);
-	int data, i, ret;
-
-	mt9t112_reg_mask_set(ret, client, 0x0014, 0x003, 0x0001);
-
-	/* PLL control: BYPASS PLL = 8517 */
-	mt9t112_reg_write(ret, client, 0x0014, 0x2145);
-
-	/* Replace these registers when new timing parameters are generated */
-	mt9t112_set_pll_dividers(client,
-				 priv->info->divider.m,
-				 priv->info->divider.n,
-				 priv->info->divider.p1,
-				 priv->info->divider.p2,
-				 priv->info->divider.p3,
-				 priv->info->divider.p4,
-				 priv->info->divider.p5,
-				 priv->info->divider.p6,
-				 priv->info->divider.p7);
-
-	/*
-	 * TEST_BYPASS  on
-	 * PLL_ENABLE   on
-	 * SEL_LOCK_DET on
-	 * TEST_BYPASS  off
-	 */
-	mt9t112_reg_write(ret, client, 0x0014, 0x2525);
-	mt9t112_reg_write(ret, client, 0x0014, 0x2527);
-	mt9t112_reg_write(ret, client, 0x0014, 0x3427);
-	mt9t112_reg_write(ret, client, 0x0014, 0x3027);
-
-	mdelay(10);
-
-	/*
-	 * PLL_BYPASS off
-	 * Reference clock count
-	 * I2C Master Clock Divider
-	 */
-	mt9t112_reg_write(ret, client, 0x0014, 0x3046);
-	mt9t112_reg_write(ret, client, 0x0016, 0x0400); /* JPEG initialization workaround */
-	mt9t112_reg_write(ret, client, 0x0022, 0x0190);
-	mt9t112_reg_write(ret, client, 0x3B84, 0x0212);
-
-	/* External sensor clock is PLL bypass */
-	mt9t112_reg_write(ret, client, 0x002E, 0x0500);
-
-	mt9t112_reg_mask_set(ret, client, 0x0018, 0x0002, 0x0002);
-	mt9t112_reg_mask_set(ret, client, 0x3B82, 0x0004, 0x0004);
-
-	/* MCU disabled */
-	mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0x0004);
-
-	/* out of standby */
-	mt9t112_reg_mask_set(ret, client, 0x0018, 0x0001, 0);
-
-	mdelay(50);
-
-	/*
-	 * Standby Workaround
-	 * Disable Secondary I2C Pads
-	 */
-	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
-	mdelay(1);
-	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
-	mdelay(1);
-	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
-	mdelay(1);
-	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
-	mdelay(1);
-	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
-	mdelay(1);
-	mt9t112_reg_write(ret, client, 0x0614, 0x0001);
-	mdelay(1);
-
-	/* poll to verify out of standby. Must Poll this bit */
-	for (i = 0; i < 100; i++) {
-		mt9t112_reg_read(data, client, 0x0018);
-		if (!(0x4000 & data))
-			break;
-
-		mdelay(10);
-	}
-
-	return ret;
-}
-
-static int mt9t112_init_setting(const struct i2c_client *client)
-{
-
-	int ret;
-
-	/* Adaptive Output Clock (A) */
-	mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000);
-
-	/* Read Mode (A) */
-	mt9t112_mcu_write(ret, client, VAR(18, 12), 0x0024);
-
-	/* Fine Correction (A) */
-	mt9t112_mcu_write(ret, client, VAR(18, 15), 0x00CC);
-
-	/* Fine IT Min (A) */
-	mt9t112_mcu_write(ret, client, VAR(18, 17), 0x01f1);
-
-	/* Fine IT Max Margin (A) */
-	mt9t112_mcu_write(ret, client, VAR(18, 19), 0x00fF);
-
-	/* Base Frame Lines (A) */
-	mt9t112_mcu_write(ret, client, VAR(18, 29), 0x032D);
-
-	/* Min Line Length (A) */
-	mt9t112_mcu_write(ret, client, VAR(18, 31), 0x073a);
-
-	/* Line Length (A) */
-	mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07d0);
-
-	/* Adaptive Output Clock (B) */
-	mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000);
-
-	/* Row Start (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 74), 0x004);
-
-	/* Column Start (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 76), 0x004);
-
-	/* Row End (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 78), 0x60B);
-
-	/* Column End (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 80), 0x80B);
-
-	/* Fine Correction (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 87), 0x008C);
-
-	/* Fine IT Min (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 89), 0x01F1);
-
-	/* Fine IT Max Margin (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 91), 0x00FF);
-
-	/* Base Frame Lines (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 101), 0x0668);
-
-	/* Min Line Length (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0AF0);
-
-	/* Line Length (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0AF0);
-
-	/*
-	 * Flicker Dectection registers
-	 * This section should be replaced whenever new Timing file is generated
-	 * All the following registers need to be replaced
-	 * Following registers are generated from Register Wizard but user can
-	 * modify them. For detail see auto flicker detection tuning
-	 */
-
-	/* FD_FDPERIOD_SELECT */
-	mt9t112_mcu_write(ret, client, VAR8(8, 5), 0x01);
-
-	/* PRI_B_CONFIG_FD_ALGO_RUN */
-	mt9t112_mcu_write(ret, client, VAR(27, 17), 0x0003);
-
-	/* PRI_A_CONFIG_FD_ALGO_RUN */
-	mt9t112_mcu_write(ret, client, VAR(26, 17), 0x0003);
-
-	/*
-	 * AFD range detection tuning registers
-	 */
-
-	/* search_f1_50 */
-	mt9t112_mcu_write(ret, client, VAR8(18, 165), 0x25);
-
-	/* search_f2_50 */
-	mt9t112_mcu_write(ret, client, VAR8(18, 166), 0x28);
-
-	/* search_f1_60 */
-	mt9t112_mcu_write(ret, client, VAR8(18, 167), 0x2C);
-
-	/* search_f2_60 */
-	mt9t112_mcu_write(ret, client, VAR8(18, 168), 0x2F);
-
-	/* period_50Hz (A) */
-	mt9t112_mcu_write(ret, client, VAR8(18, 68), 0xBA);
-
-	/* secret register by aptina */
-	/* period_50Hz (A MSB) */
-	mt9t112_mcu_write(ret, client, VAR8(18, 303), 0x00);
-
-	/* period_60Hz (A) */
-	mt9t112_mcu_write(ret, client, VAR8(18, 69), 0x9B);
-
-	/* secret register by aptina */
-	/* period_60Hz (A MSB) */
-	mt9t112_mcu_write(ret, client, VAR8(18, 301), 0x00);
-
-	/* period_50Hz (B) */
-	mt9t112_mcu_write(ret, client, VAR8(18, 140), 0x82);
-
-	/* secret register by aptina */
-	/* period_50Hz (B) MSB */
-	mt9t112_mcu_write(ret, client, VAR8(18, 304), 0x00);
-
-	/* period_60Hz (B) */
-	mt9t112_mcu_write(ret, client, VAR8(18, 141), 0x6D);
-
-	/* secret register by aptina */
-	/* period_60Hz (B) MSB */
-	mt9t112_mcu_write(ret, client, VAR8(18, 302), 0x00);
-
-	/* FD Mode */
-	mt9t112_mcu_write(ret, client, VAR8(8, 2), 0x10);
-
-	/* Stat_min */
-	mt9t112_mcu_write(ret, client, VAR8(8, 9), 0x02);
-
-	/* Stat_max */
-	mt9t112_mcu_write(ret, client, VAR8(8, 10), 0x03);
-
-	/* Min_amplitude */
-	mt9t112_mcu_write(ret, client, VAR8(8, 12), 0x0A);
-
-	/* RX FIFO Watermark (A) */
-	mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0014);
-
-	/* RX FIFO Watermark (B) */
-	mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0014);
-
-	/* MCLK: 16MHz
-	 * PCLK: 73MHz
-	 * CorePixCLK: 36.5 MHz
-	 */
-	mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 133);
-	mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 110);
-	mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 130);
-	mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 108);
-
-	mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 27);
-	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 30);
-	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 32);
-	mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 35);
-
-	return ret;
-}
-
-static int mt9t112_auto_focus_setting(const struct i2c_client *client)
-{
-	int ret;
-
-	mt9t112_mcu_write(ret, client, VAR(12, 13),	0x000F);
-	mt9t112_mcu_write(ret, client, VAR(12, 23),	0x0F0F);
-	mt9t112_mcu_write(ret, client, VAR8(1, 0),	0x06);
-
-	mt9t112_reg_write(ret, client, 0x0614, 0x0000);
-
-	mt9t112_mcu_write(ret, client, VAR8(1, 0),	0x05);
-	mt9t112_mcu_write(ret, client, VAR8(12, 2),	0x02);
-	mt9t112_mcu_write(ret, client, VAR(12, 3),	0x0002);
-	mt9t112_mcu_write(ret, client, VAR(17, 3),	0x8001);
-	mt9t112_mcu_write(ret, client, VAR(17, 11),	0x0025);
-	mt9t112_mcu_write(ret, client, VAR(17, 13),	0x0193);
-	mt9t112_mcu_write(ret, client, VAR8(17, 33),	0x18);
-	mt9t112_mcu_write(ret, client, VAR8(1, 0),	0x05);
-
-	return ret;
-}
-
-static int mt9t112_auto_focus_trigger(const struct i2c_client *client)
-{
-	int ret;
-
-	mt9t112_mcu_write(ret, client, VAR8(12, 25), 0x01);
-
-	return ret;
-}
-
-static int mt9t112_init_camera(const struct i2c_client *client)
-{
-	int ret;
-
-	ECHECKER(ret, mt9t112_reset(client));
-
-	ECHECKER(ret, mt9t112_init_pll(client));
-
-	ECHECKER(ret, mt9t112_init_setting(client));
-
-	ECHECKER(ret, mt9t112_auto_focus_setting(client));
-
-	mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0);
-
-	/* Analog setting B */
-	mt9t112_reg_write(ret, client, 0x3084, 0x2409);
-	mt9t112_reg_write(ret, client, 0x3092, 0x0A49);
-	mt9t112_reg_write(ret, client, 0x3094, 0x4949);
-	mt9t112_reg_write(ret, client, 0x3096, 0x4950);
-
-	/*
-	 * Disable adaptive clock
-	 * PRI_A_CONFIG_JPEG_OB_TX_CONTROL_VAR
-	 * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR
-	 */
-	mt9t112_mcu_write(ret, client, VAR(26, 160), 0x0A2E);
-	mt9t112_mcu_write(ret, client, VAR(27, 160), 0x0A2E);
-
-	/* Configure STatus in Status_before_length Format and enable header */
-	/* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */
-	mt9t112_mcu_write(ret, client, VAR(27, 144), 0x0CB4);
-
-	/* Enable JPEG in context B */
-	/* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */
-	mt9t112_mcu_write(ret, client, VAR8(27, 142), 0x01);
-
-	/* Disable Dac_TXLO */
-	mt9t112_reg_write(ret, client, 0x316C, 0x350F);
-
-	/* Set max slew rates */
-	mt9t112_reg_write(ret, client, 0x1E, 0x777);
-
-	return ret;
-}
-
-/************************************************************************
-			v4l2_subdev_core_ops
-************************************************************************/
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9t112_g_register(struct v4l2_subdev *sd,
-			      struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int                ret;
-
-	reg->size = 2;
-	mt9t112_reg_read(ret, client, reg->reg);
-
-	reg->val = (__u64)ret;
-
-	return 0;
-}
-
-static int mt9t112_s_register(struct v4l2_subdev *sd,
-			      const struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int ret;
-
-	mt9t112_reg_write(ret, client, reg->reg, reg->val);
-
-	return ret;
-}
-#endif
-
-static int mt9t112_s_power(struct v4l2_subdev *sd, int on)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-
-	return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
-}
-
-static const struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = {
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register	= mt9t112_g_register,
-	.s_register	= mt9t112_s_register,
-#endif
-	.s_power	= mt9t112_s_power,
-};
-
-
-/************************************************************************
-			v4l2_subdev_video_ops
-************************************************************************/
-static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-	int ret = 0;
-
-	if (!enable) {
-		/* FIXME
-		 *
-		 * If user selected large output size,
-		 * and used it long time,
-		 * mt9t112 camera will be very warm.
-		 *
-		 * But current driver can not stop mt9t112 camera.
-		 * So, set small size here to solve this problem.
-		 */
-		mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT);
-		return ret;
-	}
-
-	if (!(priv->flags & INIT_DONE)) {
-		u16 param = PCLK_RISING & priv->flags ? 0x0001 : 0x0000;
-
-		ECHECKER(ret, mt9t112_init_camera(client));
-
-		/* Invert PCLK (Data sampled on falling edge of pixclk) */
-		mt9t112_reg_write(ret, client, 0x3C20, param);
-
-		mdelay(5);
-
-		priv->flags |= INIT_DONE;
-	}
-
-	mt9t112_mcu_write(ret, client, VAR(26, 7), priv->format->fmt);
-	mt9t112_mcu_write(ret, client, VAR(26, 9), priv->format->order);
-	mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
-
-	mt9t112_set_a_frame_size(client,
-				 priv->frame.width,
-				 priv->frame.height);
-
-	ECHECKER(ret, mt9t112_auto_focus_trigger(client));
-
-	dev_dbg(&client->dev, "format : %d\n", priv->format->code);
-	dev_dbg(&client->dev, "size   : %d x %d\n",
-		priv->frame.width,
-		priv->frame.height);
-
-	CLOCK_INFO(client, EXT_CLOCK);
-
-	return ret;
-}
-
-static int mt9t112_set_params(struct mt9t112_priv *priv,
-			      const struct v4l2_rect *rect,
-			      u32 code)
-{
-	int i;
-
-	/*
-	 * get color format
-	 */
-	for (i = 0; i < priv->num_formats; i++)
-		if (mt9t112_cfmts[i].code == code)
-			break;
-
-	if (i == priv->num_formats)
-		return -EINVAL;
-
-	priv->frame  = *rect;
-
-	/*
-	 * frame size check
-	 */
-	mt9t112_frame_check(&priv->frame.width, &priv->frame.height,
-			    &priv->frame.left, &priv->frame.top);
-
-	priv->format = mt9t112_cfmts + i;
-
-	return 0;
-}
-
-static int mt9t112_get_selection(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_selection *sel)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-
-	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
-		return -EINVAL;
-
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		sel->r.left = 0;
-		sel->r.top = 0;
-		sel->r.width = MAX_WIDTH;
-		sel->r.height = MAX_HEIGHT;
-		return 0;
-	case V4L2_SEL_TGT_CROP:
-		sel->r = priv->frame;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-static int mt9t112_set_selection(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_selection *sel)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-	const struct v4l2_rect *rect = &sel->r;
-
-	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
-	    sel->target != V4L2_SEL_TGT_CROP)
-		return -EINVAL;
-
-	return mt9t112_set_params(priv, rect, priv->format->code);
-}
-
-static int mt9t112_get_fmt(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_format *format)
-{
-	struct v4l2_mbus_framefmt *mf = &format->format;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-
-	if (format->pad)
-		return -EINVAL;
-
-	mf->width	= priv->frame.width;
-	mf->height	= priv->frame.height;
-	mf->colorspace	= priv->format->colorspace;
-	mf->code	= priv->format->code;
-	mf->field	= V4L2_FIELD_NONE;
-
-	return 0;
-}
-
-static int mt9t112_s_fmt(struct v4l2_subdev *sd,
-			 struct v4l2_mbus_framefmt *mf)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-	struct v4l2_rect rect = {
-		.width = mf->width,
-		.height = mf->height,
-		.left = priv->frame.left,
-		.top = priv->frame.top,
-	};
-	int ret;
-
-	ret = mt9t112_set_params(priv, &rect, mf->code);
-
-	if (!ret)
-		mf->colorspace = priv->format->colorspace;
-
-	return ret;
-}
-
-static int mt9t112_set_fmt(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_format *format)
-{
-	struct v4l2_mbus_framefmt *mf = &format->format;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-	unsigned int top, left;
-	int i;
-
-	if (format->pad)
-		return -EINVAL;
-
-	for (i = 0; i < priv->num_formats; i++)
-		if (mt9t112_cfmts[i].code == mf->code)
-			break;
-
-	if (i == priv->num_formats) {
-		mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
-		mf->colorspace = V4L2_COLORSPACE_JPEG;
-	} else {
-		mf->colorspace	= mt9t112_cfmts[i].colorspace;
-	}
-
-	mt9t112_frame_check(&mf->width, &mf->height, &left, &top);
-
-	mf->field = V4L2_FIELD_NONE;
-
-	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		return mt9t112_s_fmt(sd, mf);
-	cfg->try_fmt = *mf;
-	return 0;
-}
-
-static int mt9t112_enum_mbus_code(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_mbus_code_enum *code)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-
-	if (code->pad || code->index >= priv->num_formats)
-		return -EINVAL;
-
-	code->code = mt9t112_cfmts[code->index].code;
-
-	return 0;
-}
-
-static int mt9t112_g_mbus_config(struct v4l2_subdev *sd,
-				 struct v4l2_mbus_config *cfg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
-	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
-		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH |
-		V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING;
-	cfg->type = V4L2_MBUS_PARALLEL;
-	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
-	return 0;
-}
-
-static int mt9t112_s_mbus_config(struct v4l2_subdev *sd,
-				 const struct v4l2_mbus_config *cfg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-	struct mt9t112_priv *priv = to_mt9t112(client);
-
-	if (soc_camera_apply_board_flags(ssdd, cfg) & V4L2_MBUS_PCLK_SAMPLE_RISING)
-		priv->flags |= PCLK_RISING;
-
-	return 0;
-}
-
-static const struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = {
-	.s_stream	= mt9t112_s_stream,
-	.g_mbus_config	= mt9t112_g_mbus_config,
-	.s_mbus_config	= mt9t112_s_mbus_config,
-};
-
-static const struct v4l2_subdev_pad_ops mt9t112_subdev_pad_ops = {
-	.enum_mbus_code = mt9t112_enum_mbus_code,
-	.get_selection	= mt9t112_get_selection,
-	.set_selection	= mt9t112_set_selection,
-	.get_fmt	= mt9t112_get_fmt,
-	.set_fmt	= mt9t112_set_fmt,
-};
-
-/************************************************************************
-			i2c driver
-************************************************************************/
-static const struct v4l2_subdev_ops mt9t112_subdev_ops = {
-	.core	= &mt9t112_subdev_core_ops,
-	.video	= &mt9t112_subdev_video_ops,
-	.pad	= &mt9t112_subdev_pad_ops,
-};
-
-static int mt9t112_camera_probe(struct i2c_client *client)
-{
-	struct mt9t112_priv *priv = to_mt9t112(client);
-	const char          *devname;
-	int                  chipid;
-	int		     ret;
-
-	ret = mt9t112_s_power(&priv->subdev, 1);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * check and show chip ID
-	 */
-	mt9t112_reg_read(chipid, client, 0x0000);
-
-	switch (chipid) {
-	case 0x2680:
-		devname = "mt9t111";
-		priv->num_formats = 1;
-		break;
-	case 0x2682:
-		devname = "mt9t112";
-		priv->num_formats = ARRAY_SIZE(mt9t112_cfmts);
-		break;
-	default:
-		dev_err(&client->dev, "Product ID error %04x\n", chipid);
-		ret = -ENODEV;
-		goto done;
-	}
-
-	dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid);
-
-done:
-	mt9t112_s_power(&priv->subdev, 0);
-	return ret;
-}
-
-static int mt9t112_probe(struct i2c_client *client,
-			 const struct i2c_device_id *did)
-{
-	struct mt9t112_priv *priv;
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-	struct v4l2_rect rect = {
-		.width = VGA_WIDTH,
-		.height = VGA_HEIGHT,
-		.left = (MAX_WIDTH - VGA_WIDTH) / 2,
-		.top = (MAX_HEIGHT - VGA_HEIGHT) / 2,
-	};
-	int ret;
-
-	if (!ssdd || !ssdd->drv_priv) {
-		dev_err(&client->dev, "mt9t112: missing platform data!\n");
-		return -EINVAL;
-	}
-
-	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->info = ssdd->drv_priv;
-
-	v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops);
-
-	priv->clk = v4l2_clk_get(&client->dev, "mclk");
-	if (IS_ERR(priv->clk))
-		return PTR_ERR(priv->clk);
-
-	ret = mt9t112_camera_probe(client);
-
-	/* Cannot fail: using the default supported pixel code */
-	if (!ret)
-		mt9t112_set_params(priv, &rect, MEDIA_BUS_FMT_UYVY8_2X8);
-	else
-		v4l2_clk_put(priv->clk);
-
-	return ret;
-}
-
-static int mt9t112_remove(struct i2c_client *client)
-{
-	struct mt9t112_priv *priv = to_mt9t112(client);
-
-	v4l2_clk_put(priv->clk);
-	return 0;
-}
-
-static const struct i2c_device_id mt9t112_id[] = {
-	{ "mt9t112", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mt9t112_id);
-
-static struct i2c_driver mt9t112_i2c_driver = {
-	.driver = {
-		.name = "mt9t112",
-	},
-	.probe    = mt9t112_probe,
-	.remove   = mt9t112_remove,
-	.id_table = mt9t112_id,
-};
-
-module_i2c_driver(mt9t112_i2c_driver);
-
-MODULE_DESCRIPTION("SoC Camera driver for mt9t112");
-MODULE_AUTHOR("Kuninori Morimoto");
-MODULE_LICENSE("GPL v2");
-- 
2.20.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux