On 1/17/19 2:01 PM, Philipp Zabel wrote:
> On Wed, 2019-01-16 at 16:28 +0100, Hans Verkuil wrote:
>> On 1/11/19 12:10 PM, Philipp Zabel wrote:
>>> Prepare for mbus format being smaller than the written rectangle
>>> due to burst size.
>>>
>>> Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
>>> Reviewed-by: Steve Longerbeam <slongerbeam@xxxxxxxxx>
>>> ---
>>> drivers/staging/media/imx/imx-media-capture.c | 56 +++++++++++++------
>>> 1 file changed, 38 insertions(+), 18 deletions(-)
>>>
>>> diff --git a/drivers/staging/media/imx/imx-media-capture.c b/drivers/staging/media/imx/imx-media-capture.c
>>> index fb985e68f9ab..614e335fb61c 100644
>>> --- a/drivers/staging/media/imx/imx-media-capture.c
>>> +++ b/drivers/staging/media/imx/imx-media-capture.c
>>> @@ -203,21 +203,13 @@ static int capture_g_fmt_vid_cap(struct file *file, void *fh,
>>> return 0;
>>> }
>>>
>>> -static int capture_try_fmt_vid_cap(struct file *file, void *fh,
>>> - struct v4l2_format *f)
>>> +static int __capture_try_fmt_vid_cap(struct capture_priv *priv,
>>> + struct v4l2_subdev_format *fmt_src,
>>> + struct v4l2_format *f)
>>> {
>>> - struct capture_priv *priv = video_drvdata(file);
>>> - struct v4l2_subdev_format fmt_src;
>>> const struct imx_media_pixfmt *cc, *cc_src;
>>> - int ret;
>>>
>>> - fmt_src.pad = priv->src_sd_pad;
>>> - fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>> - ret = v4l2_subdev_call(priv->src_sd, pad, get_fmt, NULL, &fmt_src);
>>> - if (ret)
>>> - return ret;
>>> -
>>> - cc_src = imx_media_find_ipu_format(fmt_src.format.code, CS_SEL_ANY);
>>> + cc_src = imx_media_find_ipu_format(fmt_src->format.code, CS_SEL_ANY);
>>> if (cc_src) {
>>> u32 fourcc, cs_sel;
>>>
>>> @@ -231,7 +223,7 @@ static int capture_try_fmt_vid_cap(struct file *file, void *fh,
>>> cc = imx_media_find_format(fourcc, cs_sel, false);
>>> }
>>> } else {
>>> - cc_src = imx_media_find_mbus_format(fmt_src.format.code,
>>> + cc_src = imx_media_find_mbus_format(fmt_src->format.code,
>>> CS_SEL_ANY, true);
>>> if (WARN_ON(!cc_src))
>>> return -EINVAL;
>>> @@ -239,15 +231,32 @@ static int capture_try_fmt_vid_cap(struct file *file, void *fh,
>>> cc = cc_src;
>>> }
>>>
>>> - imx_media_mbus_fmt_to_pix_fmt(&f->fmt.pix, &fmt_src.format, cc);
>>> + imx_media_mbus_fmt_to_pix_fmt(&f->fmt.pix, &fmt_src->format, cc);
>>>
>>> return 0;
>>> }
>>>
>>> +static int capture_try_fmt_vid_cap(struct file *file, void *fh,
>>> + struct v4l2_format *f)
>>> +{
>>> + struct capture_priv *priv = video_drvdata(file);
>>> + struct v4l2_subdev_format fmt_src;
>>> + int ret;
>>> +
>>> + fmt_src.pad = priv->src_sd_pad;
>>> + fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>> + ret = v4l2_subdev_call(priv->src_sd, pad, get_fmt, NULL, &fmt_src);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + return __capture_try_fmt_vid_cap(priv, &fmt_src, f);
>>> +}
>>> +
>>> static int capture_s_fmt_vid_cap(struct file *file, void *fh,
>>> struct v4l2_format *f)
>>> {
>>> struct capture_priv *priv = video_drvdata(file);
>>> + struct v4l2_subdev_format fmt_src;
>>> int ret;
>>>
>>> if (vb2_is_busy(&priv->q)) {
>>> @@ -255,7 +264,13 @@ static int capture_s_fmt_vid_cap(struct file *file, void *fh,
>>> return -EBUSY;
>>> }
>>>
>>> - ret = capture_try_fmt_vid_cap(file, priv, f);
>>> + fmt_src.pad = priv->src_sd_pad;
>>> + fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>>> + ret = v4l2_subdev_call(priv->src_sd, pad, get_fmt, NULL, &fmt_src);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + ret = __capture_try_fmt_vid_cap(priv, &fmt_src, f);
>>> if (ret)
>>> return ret;
>>>
>>> @@ -264,8 +279,8 @@ static int capture_s_fmt_vid_cap(struct file *file, void *fh,
>>> CS_SEL_ANY, true);
>>> priv->vdev.compose.left = 0;
>>> priv->vdev.compose.top = 0;
>>> - priv->vdev.compose.width = f->fmt.pix.width;
>>> - priv->vdev.compose.height = f->fmt.pix.height;
>>> + priv->vdev.compose.width = fmt_src.format.width;
>>> + priv->vdev.compose.height = fmt_src.format.height;
>>>
>>> return 0;
>>> }
>>> @@ -306,9 +321,14 @@ static int capture_g_selection(struct file *file, void *fh,
>>> case V4L2_SEL_TGT_COMPOSE:
>>> case V4L2_SEL_TGT_COMPOSE_DEFAULT:
>>> case V4L2_SEL_TGT_COMPOSE_BOUNDS:
>>> - case V4L2_SEL_TGT_COMPOSE_PADDED:
>>> s->r = priv->vdev.compose;
>>> break;
>>> + case V4L2_SEL_TGT_COMPOSE_PADDED:
>>
>> Shouldn't this be for COMPOSE_BOUNDS as well?
>
> COMPOSE_BOUNDS specifies the bounds in which COMPOSE can be set. Since
> we don't allow changing COMPOSE at all, COMPOSE/BOUNDS/DEFAULT should
> all be the same.
> COMPOSE_PADDED is larger than the fixed COMPOSE rectangle on the right
> side to align to DMA burst size.
>
>> Do you need _PADDED at all? That only makes sense if the DMA writes beyond
>> the COMPOSE rectangle due to padding requirements. I'm not aware that that's
>> the case for imx.
>> I may be wrong, this would be correct if the DMA indeed
>> writes the full buffer, even if the actual image is smaller.
>
> That's exactly what happens, the hardware writes with a fixed burst size
> and doesn't support partial bursts as far as I am aware.
> If the video input signal width is not a multiple of DMA burst size, the
> last written burst of each line does contain some invalid padding pixels
> at the end.
Ah, OK. Can you add a comment to clarify this?
>
>>> + s->r.left = 0;
>>> + s->r.top = 0;
>>> + s->r.width = priv->vdev.fmt.fmt.pix.width;
>>> + s->r.height = priv->vdev.fmt.fmt.pix.height;
>>> + break;
>>> default:
>>> return -EINVAL;
>>> }
>>>
>>
>> I see that the image is always DMAed to the top-left corner of the buffer.
>>
>> Is there a need to implement s_selection so you can change the top-left
>> corner of the compose rectangle within the buffer?
>
> I haven't seen a use case for this, but I'm curious how that is supposed
> to work. Currently we are limiting buffer width/height in S_FMT to the
> connected subdevice's mbus format width / height.
> After this we'd have to allow any width / height larger than mbus format
> and limit compose rectangle width/height to the mbus format?
Given the fact that the DMA doesn't support partial bursts (aka scatter-gather
DMA), there is no point in doing this.
The use-case I was thinking of is that e.g. you make a buffer that's twice the
height and width of the actual stream and compose it into one quarter of the
buffer. That way you can compose multiple streams into its own 'window' inside
the buffer. But that only works with gather-scatter DMA and so is not relevant
for this hardware.
So just add a comment and this patch is fine.
Regards,
Hans
