From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx> This is the ABI for the two halves of a para-virtualized camera driver which extends Xen's reach multimedia capabilities even farther enabling it for video conferencing, In-Vehicle Infotainment, high definition maps etc. The initial goal is to support most needed functionality with the final idea to make it possible to extend the protocol if need be: 1. Provide means for base virtual device configuration: - pixel formats - resolutions - frame rates 2. Support basic camera controls: - contrast - brightness - hue - saturation 3. Support streaming control Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx> --- xen/include/public/io/cameraif.h | 1364 ++++++++++++++++++++++++++++++ 1 file changed, 1364 insertions(+) create mode 100644 xen/include/public/io/cameraif.h diff --git a/xen/include/public/io/cameraif.h b/xen/include/public/io/cameraif.h new file mode 100644 index 000000000000..246eb2457f40 --- /dev/null +++ b/xen/include/public/io/cameraif.h @@ -0,0 +1,1364 @@ +/****************************************************************************** + * cameraif.h + * + * Unified camera device I/O interface for Xen guest OSes. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright (C) 2018-2019 EPAM Systems Inc. + * + * Author: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx> + */ + +#ifndef __XEN_PUBLIC_IO_CAMERAIF_H__ +#define __XEN_PUBLIC_IO_CAMERAIF_H__ + +#include "ring.h" +#include "../grant_table.h" + +/* + ****************************************************************************** + * Protocol version + ****************************************************************************** + */ +#define XENCAMERA_PROTOCOL_VERSION "1" + +/* + ****************************************************************************** + * Feature and Parameter Negotiation + ****************************************************************************** + * + * Front->back notifications: when enqueuing a new request, sending a + * notification can be made conditional on xencamera_req (i.e., the generic + * hold-off mechanism provided by the ring macros). Backends must set + * xencamera_req appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()). + * + * Back->front notifications: when enqueuing a new response, sending a + * notification can be made conditional on xencamera_resp (i.e., the generic + * hold-off mechanism provided by the ring macros). Frontends must set + * xencamera_resp appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()). + * + * The two halves of a para-virtual camera driver utilize nodes within + * XenStore to communicate capabilities and to negotiate operating parameters. + * This section enumerates these nodes which reside in the respective front and + * backend portions of XenStore, following the XenBus convention. + * + * All data in XenStore is stored as strings. Nodes specifying numeric + * values are encoded in decimal. Integer value ranges listed below are + * expressed as fixed sized integer types capable of storing the conversion + * of a properly formatted node string, without loss of information. + * + ****************************************************************************** + * Example configuration + ****************************************************************************** + * + * This is an example of backend and frontend configuration: + * + *--------------------------------- Backend ----------------------------------- + * + * /local/domain/0/backend/vcamera/1/0/frontend-id = "1" + * /local/domain/0/backend/vcamera/1/0/frontend = "/local/domain/1/device/vcamera/0" + * /local/domain/0/backend/vcamera/1/0/state = "4" + * /local/domain/0/backend/vcamera/1/0/versions = "1,2" + * + *--------------------------------- Frontend ---------------------------------- + * + * /local/domain/1/device/vcamera/0/backend-id = "0" + * /local/domain/1/device/vcamera/0/backend = "/local/domain/0/backend/vcamera/1" + * /local/domain/1/device/vcamera/0/state = "4" + * /local/domain/1/device/vcamera/0/version = "1" + * /local/domain/1/device/vcamera/0/be-alloc = "1" + * + *---------------------------- Device 0 configuration ------------------------- + * + * /local/domain/1/device/vcamera/0/max-buffers = "3" + * /local/domain/1/device/vcamera/0/controls = "contrast,hue" + * /local/domain/1/device/vcamera/0/formats/YUYV/640x480/frame-rates = "30/1,15/1" + * /local/domain/1/device/vcamera/0/formats/YUYV/1920x1080/frame-rates = "15/2" + * /local/domain/1/device/vcamera/0/formats/BGRA/640x480/frame-rates = "15/1,15/2" + * /local/domain/1/device/vcamera/0/formats/BGRA/1200x720/frame-rates = "15/2" + * /local/domain/1/device/vcamera/0/unique-id = "0" + * /local/domain/1/device/vcamera/0/req-ring-ref = "2832" + * /local/domain/1/device/vcamera/0/req-event-channel = "15" + * /local/domain/1/device/vcamera/0/evt-ring-ref = "387" + * /local/domain/1/device/vcamera/0/evt-event-channel = "16" + * + *---------------------------- Device 1 configuration ------------------------- + * + * /local/domain/1/device/vcamera/1/max-buffers = "8" + * /local/domain/1/device/vcamera/1/controls = "brightness,saturation,hue" + * /local/domain/1/device/vcamera/1/formats/YUYV/640x480/frame-rates = "30/1,15/2" + * /local/domain/1/device/vcamera/1/formats/YUYV/1920x1080/frame-rates = "15/2" + * /local/domain/1/device/vcamera/1/unique-id = "1" + * /local/domain/1/device/vcamera/1/req-ring-ref = "2833" + * /local/domain/1/device/vcamera/1/req-event-channel = "17" + * /local/domain/1/device/vcamera/1/evt-ring-ref = "388" + * /local/domain/1/device/vcamera/1/evt-event-channel = "18" + * + ****************************************************************************** + * Backend XenBus Nodes + ****************************************************************************** + * + *----------------------------- Protocol version ------------------------------ + * + * versions + * Values: <string> + * + * List of XENCAMERA_LIST_SEPARATOR separated protocol versions supported + * by the backend. For example "1,2,3". + * + ****************************************************************************** + * Frontend XenBus Nodes + ****************************************************************************** + * + *-------------------------------- Addressing --------------------------------- + * + * dom-id + * Values: <uint16_t> + * + * Domain identifier. + * + * dev-id + * Values: <uint16_t> + * + * Device identifier. + * + * /local/domain/<dom-id>/device/vcamera/<dev-id>/... + * + *----------------------------- Protocol version ------------------------------ + * + * version + * Values: <string> + * + * Protocol version, chosen among the ones supported by the backend. + * + *------------------------- Backend buffer allocation ------------------------- + * + * be-alloc + * Values: "0", "1" + * + * If value is set to "1", then backend will be the buffer + * provider/allocator for this domain during XENCAMERA_OP_BUF_CREATE + * operation. + * If value is not "1" or omitted frontend must allocate buffers itself. + * + *------------------------------- Camera settings ----------------------------- + * + * unique-id + * Values: <string> + * + * After device instance initialization each camera is assigned a + * unique ID, so it can be identified by the backend by this ID. + * This can be UUID or such. + * + * max-buffers + * Values: <uint8_t> + * + * Maximum number of camera buffers this frontend may use. + * + * controls + * Values: <list of string> + * + * List of supported camera controls separated by XENCAMERA_LIST_SEPARATOR. + * Camera controls are expressed as a list of string values w/o any + * ordering requirement. + * + * formats + * Values: <format, char[7]> + * + * Formats are organized as a set of directories one per each + * supported pixel format. The name of the directory is the + * corresponding FOURCC string label. The next level of + * the directory under <formats> represents supported resolutions. + * If the format represents a big-endian variant of a little + * endian format, then the "-BE" suffix must be added. E.g. 'AR15' vs + * 'AR15-BE'. + * If FOURCC string label has spaces then those are only allowed to + * be at the end of the label and must be trimmed, for example + * 'Y16' and 'Y16-BE' will be trimmed. + * + * resolution + * Values: <width, uint32_t>x<height, uint32_t> + * + * Resolutions are organized as a set of directories one per each + * supported resolution under corresponding <formats> directory. + * The name of the directory is the supported width and height + * of the camera resolution in pixels. + * + * frame-rates + * Values: <numerator, uint32_t>/<denominator, uint32_t> + * + * List of XENCAMERA_FRAME_RATE_SEPARATOR separated supported frame rates + * of the camera expressed as numerator and denominator of the + * corresponding frame rate. + * + *------------------- Camera Request Transport Parameters --------------------- + * + * This communication path is used to deliver requests from frontend to backend + * and get the corresponding responses from backend to frontend, + * set up per virtual camera device. + * + * req-event-channel + * Values: <uint32_t> + * + * The identifier of the Xen camera's control event channel + * used to signal activity in the ring buffer. + * + * req-ring-ref + * Values: <uint32_t> + * + * The Xen grant reference granting permission for the backend to map + * a sole page of camera's control ring buffer. + * + *-------------------- Camera Event Transport Parameters ---------------------- + * + * This communication path is used to deliver asynchronous events from backend + * to frontend, set up per virtual camera device. + * + * evt-event-channel + * Values: <uint32_t> + * + * The identifier of the Xen camera's event channel + * used to signal activity in the ring buffer. + * + * evt-ring-ref + * Values: <uint32_t> + * + * The Xen grant reference granting permission for the backend to map + * a sole page of camera's event ring buffer. + */ + +/* + ****************************************************************************** + * STATE DIAGRAMS + ****************************************************************************** + * + * Tool stack creates front and back state nodes with initial state + * XenbusStateInitialising. + * Tool stack creates and sets up frontend camera configuration + * nodes per domain. + * + *-------------------------------- Normal flow -------------------------------- + * + * Front Back + * ================================= ===================================== + * XenbusStateInitialising XenbusStateInitialising + * o Query backend device identification + * data. + * o Open and validate backend device. + * | + * | + * V + * XenbusStateInitWait + * + * o Query frontend configuration + * o Allocate and initialize + * event channels per configured + * camera. + * o Publish transport parameters + * that will be in effect during + * this connection. + * | + * | + * V + * XenbusStateInitialised + * + * o Query frontend transport parameters. + * o Connect to the event channels. + * | + * | + * V + * XenbusStateConnected + * + * o Create and initialize OS + * virtual camera as per + * configuration. + * | + * | + * V + * XenbusStateConnected + * + * XenbusStateUnknown + * XenbusStateClosed + * XenbusStateClosing + * o Remove virtual camera device + * o Remove event channels + * | + * | + * V + * XenbusStateClosed + * + *------------------------------- Recovery flow ------------------------------- + * + * In case of frontend unrecoverable errors backend handles that as + * if frontend goes into the XenbusStateClosed state. + * + * In case of backend unrecoverable errors frontend tries removing + * the virtualized device. If this is possible at the moment of error, + * then frontend goes into the XenbusStateInitialising state and is ready for + * new connection with backend. If the virtualized device is still in use and + * cannot be removed, then frontend goes into the XenbusStateReconfiguring state + * until either the virtualized device is removed or backend initiates a new + * connection. On the virtualized device removal frontend goes into the + * XenbusStateInitialising state. + * + * Note on XenbusStateReconfiguring state of the frontend: if backend has + * unrecoverable errors then frontend cannot send requests to the backend + * and thus cannot provide functionality of the virtualized device anymore. + * After backend is back to normal the virtualized device may still hold some + * state: configuration in use, allocated buffers, client application state etc. + * In most cases, this will require frontend to implement complex recovery + * reconnect logic. Instead, by going into XenbusStateReconfiguring state, + * frontend will make sure no new clients of the virtualized device are + * accepted, allow existing client(s) to exit gracefully by signaling error + * state etc. + * Once all the clients are gone frontend can reinitialize the virtualized + * device and get into XenbusStateInitialising state again signaling the + * backend that a new connection can be made. + * + * There are multiple conditions possible under which frontend will go from + * XenbusStateReconfiguring into XenbusStateInitialising, some of them are OS + * specific. For example: + * 1. The underlying OS framework may provide callbacks to signal that the last + * client of the virtualized device has gone and the device can be removed + * 2. Frontend can schedule a deferred work (timer/tasklet/workqueue) + * to periodically check if this is the right time to re-try removal of + * the virtualized device. + * 3. By any other means. + * + ****************************************************************************** + * REQUEST CODES + ****************************************************************************** + */ +#define XENCAMERA_OP_CONFIG_SET 0x00 +#define XENCAMERA_OP_CONFIG_GET 0x01 +#define XENCAMERA_OP_CONFIG_VALIDATE 0x02 +#define XENCAMERA_OP_FRAME_RATE_SET 0x03 +#define XENCAMERA_OP_BUF_GET_LAYOUT 0x04 +#define XENCAMERA_OP_BUF_REQUEST 0x05 +#define XENCAMERA_OP_BUF_CREATE 0x06 +#define XENCAMERA_OP_BUF_DESTROY 0x07 +#define XENCAMERA_OP_BUF_QUEUE 0x08 +#define XENCAMERA_OP_BUF_DEQUEUE 0x09 +#define XENCAMERA_OP_CTRL_ENUM 0x0a +#define XENCAMERA_OP_CTRL_SET 0x0b +#define XENCAMERA_OP_CTRL_GET 0x0c +#define XENCAMERA_OP_STREAM_START 0x0d +#define XENCAMERA_OP_STREAM_STOP 0x0e + +#define XENCAMERA_CTRL_BRIGHTNESS 0 +#define XENCAMERA_CTRL_CONTRAST 1 +#define XENCAMERA_CTRL_SATURATION 2 +#define XENCAMERA_CTRL_HUE 3 + +/* Number of supported controls. */ +#define XENCAMERA_MAX_CTRL 4 + +/* Control is read-only. */ +#define XENCAMERA_CTRL_FLG_RO (1 << 0) +/* Control is write-only. */ +#define XENCAMERA_CTRL_FLG_WO (1 << 1) +/* Control's value is volatile. */ +#define XENCAMERA_CTRL_FLG_VOLATILE (1 << 2) + +/* Supported color spaces. */ +#define XENCAMERA_COLORSPACE_DEFAULT 0 +#define XENCAMERA_COLORSPACE_SMPTE170M 1 +#define XENCAMERA_COLORSPACE_REC709 2 +#define XENCAMERA_COLORSPACE_SRGB 3 +#define XENCAMERA_COLORSPACE_OPRGB 4 +#define XENCAMERA_COLORSPACE_BT2020 5 +#define XENCAMERA_COLORSPACE_DCI_P3 6 + +/* Color space transfer function. */ +#define XENCAMERA_XFER_FUNC_DEFAULT 0 +#define XENCAMERA_XFER_FUNC_709 1 +#define XENCAMERA_XFER_FUNC_SRGB 2 +#define XENCAMERA_XFER_FUNC_OPRGB 3 +#define XENCAMERA_XFER_FUNC_NONE 4 +#define XENCAMERA_XFER_FUNC_DCI_P3 5 +#define XENCAMERA_XFER_FUNC_SMPTE2084 6 + +/* Color space Y’CbCr encoding. */ +#define XENCAMERA_YCBCR_ENC_IGNORE 0 +#define XENCAMERA_YCBCR_ENC_601 1 +#define XENCAMERA_YCBCR_ENC_709 2 +#define XENCAMERA_YCBCR_ENC_XV601 3 +#define XENCAMERA_YCBCR_ENC_XV709 4 +#define XENCAMERA_YCBCR_ENC_BT2020 5 +#define XENCAMERA_YCBCR_ENC_BT2020_CONST_LUM 6 + +/* Quantization range. */ +#define XENCAMERA_QUANTIZATION_DEFAULT 0 +#define XENCAMERA_QUANTIZATION_FULL_RANGE 1 +#define XENCAMERA_QUANTIZATION_LIM_RANGE 2 + +/* + ****************************************************************************** + * EVENT CODES + ****************************************************************************** + */ +#define XENCAMERA_EVT_FRAME_AVAIL 0x00 +#define XENCAMERA_EVT_CTRL_CHANGE 0x01 + +/* Resolution has changed. */ +#define XENCAMERA_EVT_CFG_FLG_RESOL (1 << 0) + +/* + ****************************************************************************** + * XENSTORE FIELD AND PATH NAME STRINGS, HELPERS + ****************************************************************************** + */ +#define XENCAMERA_DRIVER_NAME "vcamera" + +#define XENCAMERA_LIST_SEPARATOR "," +#define XENCAMERA_RESOLUTION_SEPARATOR "x" +#define XENCAMERA_FRACTION_SEPARATOR "/" + +#define XENCAMERA_FIELD_BE_VERSIONS "versions" +#define XENCAMERA_FIELD_FE_VERSION "version" +#define XENCAMERA_FIELD_REQ_RING_REF "req-ring-ref" +#define XENCAMERA_FIELD_REQ_CHANNEL "req-event-channel" +#define XENCAMERA_FIELD_EVT_RING_REF "evt-ring-ref" +#define XENCAMERA_FIELD_EVT_CHANNEL "evt-event-channel" +#define XENCAMERA_FIELD_MAX_BUFFERS "max-buffers" +#define XENCAMERA_FIELD_CONTROLS "controls" +#define XENCAMERA_FIELD_FORMATS "formats" +#define XENCAMERA_FIELD_FRAME_RATES "frame-rates" +#define XENCAMERA_FIELD_BE_ALLOC "be-alloc" +#define XENCAMERA_FIELD_UNIQUE_ID "unique-id" + +#define XENCAMERA_CTRL_BRIGHTNESS_STR "brightness" +#define XENCAMERA_CTRL_CONTRAST_STR "contrast" +#define XENCAMERA_CTRL_SATURATION_STR "saturation" +#define XENCAMERA_CTRL_HUE_STR "hue" + +#define XENCAMERA_FOURCC_BIGENDIAN_STR "-BE" + +/* Maximum number of buffer planes supported. */ +#define XENCAMERA_MAX_PLANE 4 + +/* + ****************************************************************************** + * STATUS RETURN CODES + ****************************************************************************** + * + * Status return code is zero on success and -XEN_EXX on failure. + * + ****************************************************************************** + * Assumptions + ****************************************************************************** + * + * - usage of grant reference 0 as invalid grant reference: + * grant reference 0 is valid, but never exposed to a PV driver, + * because of the fact it is already in use/reserved by the PV console. + * - all references in this document to page sizes must be treated + * as pages of size XEN_PAGE_SIZE unless otherwise noted. + * - all FOURCC mappings used for configuration and messaging are + * Linux V4L2 ones: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/videodev2.h + * with the following exceptions: + * - characters are allowed in [0x20; 0x7f] range + * - when used for XenStore configuration entries the following + * are not allowed: + * - '/', '\', ' ' (space), '<', '>', ':', '"', '|', '?', '*' + * - if trailing spaces are part of the FOURCC code then those must be + * trimmed + * + * + ****************************************************************************** + * Description of the protocol between frontend and backend driver + ****************************************************************************** + * + * The two halves of a Para-virtual camera driver communicate with + * each other using shared pages and event channels. + * Shared page contains a ring with request/response packets. + * + * All reserved fields in the structures below must be 0. + * + * For all request/response/event packets: + * - frame rate parameter is represented as a pair of 4 octet long + * numerator and denominator: + * - frame_rate_numer - uint32_t, numerator of the frame rate + * - frame_rate_denom - uint32_t, denominator of the frame rate + * The corresponding frame rate (Hz) is calculated as: + * frame_rate = frame_rate_numer / frame_rate_denom + * - buffer index is a zero based index of the buffer. Must be less than + * the value of XENCAMERA_OP_CONFIG_SET.num_bufs response: + * - index - uint8_t, index of the buffer. + * + * + *---------------------------------- Requests --------------------------------- + * + * All request packets have the same length (64 octets). + * All request packets have common header: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | operation | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * id - uint16_t, private guest value, echoed in response. + * operation - uint8_t, operation code, XENCAMERA_OP_XXX. + * + * + * Request to set/validate the configuration - request to set the + * configuration/mode of the camera (XENCAMERA_OP_CONFIG_SET) or to + * check if the configuration is valid and can be used + * (XENCAMERA_OP_CONFIG_VALIDATE): + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_CONFIG_XXX | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | pixel format | 12 + * +----------------+----------------+----------------+----------------+ + * | width | 16 + * +----------------+----------------+----------------+----------------+ + * | height | 20 + * +----------------+----------------+----------------+----------------+ + * | reserved | 24 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * pixel_format - uint32_t, pixel format to be used, FOURCC code. + * width - uint32_t, width in pixels. + * height - uint32_t, height in pixels. + * + * See response format for this request. + * + * Notes: + * - the only difference between XENCAMERA_OP_CONFIG_VALIDATE and + * XENCAMERA_OP_CONFIG_SET is that the former doesn't actually change + * camera configuration, but queries if the configuration is valid. + * This can be used while stream is active and/or buffers allocated. + * - frontend must check the corresponding response in order to see + * if the values reported back by the backend do match the desired ones + * and can be accepted. + * - frontend may send multiple XENCAMERA_OP_CONFIG_SET requests before + * sending XENCAMERA_OP_STREAM_START request to update or tune the + * final stream configuration. + * - configuration cannot be changed during active streaming, e.g. + * after XENCAMERA_OP_STREAM_START and before XENCAMERA_OP_STREAM_STOP + * requests. + */ +struct xencamera_config_req { + uint32_t pixel_format; + uint32_t width; + uint32_t height; +}; + +/* + * Request current configuration of the camera: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_CONFIG_GET | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * See response format for this request. + * + * + * Request to set the frame rate of the stream: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _FRAME_RATE_SET| reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | frame_rate_numer | 12 + * +----------------+----------------+----------------+----------------+ + * | frame_rate_denom | 16 + * +----------------+----------------+----------------+----------------+ + * | reserved | 20 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * frame_rate_numer - uint32_t, numerator of the frame rate. + * frame_rate_denom - uint32_t, denominator of the frame rate. + * + * Notes: + * - to query the current (actual) frame rate use XENCAMERA_OP_CONFIG_GET + * request. + * - this request can be used with camera buffers allocated, but stream + * stopped, e.g. frontend is allowed to stop the stream with + * XENCAMERA_OP_STREAM_STOP, hold the buffers allocated (e.g. keep the + * configuration set with XENCAMERA_OP_CONFIG_SET), change the + * frame rate of the stream and (re)start the stream again with + * XENCAMERA_OP_STREAM_START. + * - frame rate cannot be changed during active streaming, e.g. + * after XENCAMERA_OP_STREAM_START and before XENCAMERA_OP_STREAM_STOP + * commands. + */ +struct xencamera_frame_rate_req { + uint32_t frame_rate_numer; + uint32_t frame_rate_denom; +}; + +/* + * Request camera buffer's layout: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _BUF_GET_LAYOUT| reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * See response format for this request. + * + * + * Request number of buffers to be used: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_BUF_REQUEST| reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | num_bufs | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * num_bufs - uint8_t, desired number of buffers to be used. This is + * limited to the value configured in XenStore.max-buffers. + * Passing zero num_bufs in this request (after streaming has stopped + * and all buffers destroyed) unblocks camera configuration changes. + * + * See response format for this request. + * + * Notes: + * - frontend must check the corresponding response in order to see + * if the values reported back by the backend do match the desired ones + * and can be accepted. + * - frontend may send multiple XENCAMERA_OP_BUF_REQUEST requests before + * sending XENCAMERA_OP_STREAM_START request to update or tune the + * configuration. + * - after this request camera configuration cannot be changed, unless + * streaming is stopped and buffers destroyed + */ +struct xencamera_buf_request { + uint8_t num_bufs; +}; + +/* + * Request camera buffer creation: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_BUF_CREATE | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | index | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | plane_offset[0] | 16 + * +----------------+----------------+----------------+----------------+ + * | plane_offset[1] | 20 + * +----------------+----------------+----------------+----------------+ + * | plane_offset[2] | 24 + * +----------------+----------------+----------------+----------------+ + * | plane_offset[3] | 28 + * +----------------+----------------+----------------+----------------+ + * | gref_directory | 32 + * +----------------+----------------+----------------+----------------+ + * | reserved | 36 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * An attempt to create multiple buffers with the same index is an error. + * index can be re-used after destroying the corresponding camera buffer. + * + * index - uint8_t, index of the buffer to be created in the range + * from 0 to the num_bufs field returned in response for + * XENCAMERA_OP_BUF_REQUEST request + * plane_offset - array of uint32_t, offset of the corresponding plane + * in octets from the buffer start. Number of offsets returned is + * equal to the value returned in XENCAMERA_OP_BUF_GET_LAYOUT.num_planes. + * gref_directory - grant_ref_t, a reference to the first shared page + * describing shared buffer references. The size of the buffer is equal to + * XENCAMERA_OP_BUF_GET_LAYOUT.size response. At least one page exists. If + * shared buffer size exceeds what can be addressed by this single page, + * then reference to the next shared page must be supplied (see + * gref_dir_next_page below). + * + * If XENCAMERA_FIELD_BE_ALLOC configuration entry is set, then backend will + * allocate the buffer with the parameters provided in this request and page + * directory is handled as follows: + * Frontend on request: + * - allocates pages for the directory (gref_directory, + * gref_dir_next_page(s) + * - grants permissions for the pages of the directory to the backend + * - sets gref_dir_next_page fields + * Backend on response: + * - grants permissions for the pages of the buffer allocated to + * the frontend + * - fills in page directory with grant references + * (gref[] in struct xencamera_page_directory) + */ +struct xencamera_buf_create_req { + uint8_t index; + uint8_t reserved[3]; + uint32_t plane_offset[XENCAMERA_MAX_PLANE]; + grant_ref_t gref_directory; +}; + +/* + * Shared page for XENCAMERA_OP_BUF_CREATE buffer descriptor (gref_directory in + * the request) employs a list of pages, describing all pages of the shared + * data buffer: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | gref_dir_next_page | 4 + * +----------------+----------------+----------------+----------------+ + * | gref[0] | 8 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | gref[i] | i*4+8 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | gref[N - 1] | N*4+8 + * +----------------+----------------+----------------+----------------+ + * + * gref_dir_next_page - grant_ref_t, reference to the next page describing + * page directory. Must be 0 if there are no more pages in the list. + * gref[i] - grant_ref_t, reference to a shared page of the buffer + * allocated at XENCAMERA_OP_BUF_CREATE. + * + * Number of grant_ref_t entries in the whole page directory is not + * passed, but instead can be calculated as: + * num_grefs_total = (XENCAMERA_OP_BUF_REQUEST.size + XEN_PAGE_SIZE - 1) / + * XEN_PAGE_SIZE + */ +struct xencamera_page_directory { + grant_ref_t gref_dir_next_page; + grant_ref_t gref[1]; /* Variable length */ +}; + +/* + * Request buffer destruction - destroy a previously allocated camera buffer: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_BUF_DESTROY| reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | index | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * index - uint8_t, index of the buffer to be destroyed. + * + * + * Request queueing of the buffer for backend use: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_BUF_QUEUE | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | index | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * Notes: + * - frontends must not access the buffer content after this request until + * response to XENCAMERA_OP_BUF_DEQUEUE has been received. + * - buffers must be queued to the backend before destroying them with + * XENCAMERA_OP_BUF_DESTROY. + * + * index - uint8_t, index of the buffer to be queued. + * + * + * Request dequeueing of the buffer for frontend use: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id |_OP_BUF_DEQUEUE | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | index | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * Notes: + * - frontend is allowed to access the buffer content after the corresponding + * response to this request. + * + * index - uint8_t, index of the buffer to be queued. + * + * + * Request camera control details: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_CTRL_ENUM | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | index | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * See response format for this request. + * + * index - uint8_t, index of the control to be queried. + */ +struct xencamera_index { + uint8_t index; +}; + +/* + * Request camera control change: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_SET_CTRL | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | type | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * | value low 32-bit | 20 + * +----------------+----------------+----------------+----------------+ + * | value high 32-bit | 24 + * +----------------+----------------+----------------+----------------+ + * | reserved | 28 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * type - uint8_t, type of the control, one of the XENCAMERA_CTRL_XXX. + * value - int64_t, new value of the control. + */ +struct xencamera_ctrl_value { + uint8_t type; + uint8_t reserved[7]; + int64_t value; +}; + +/* + * Request camera control state: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_GET_CTRL | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | type | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * See response format for this request. + * + * type - uint8_t, type of the control, one of the XENCAMERA_CTRL_XXX. + */ +struct xencamera_get_ctrl_req { + uint8_t type; +}; + +/* + * Request camera capture stream start: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id |_OP_STREAM_START| reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * + * Request camera capture stream stop: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id |_OP_STREAM_STOP | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * + *---------------------------------- Responses -------------------------------- + * + * All response packets have the same length (64 octets). + * + * All response packets have common header: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | operation | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | status | 8 + * +----------------+----------------+----------------+----------------+ + * + * id - uint16_t, copied from the request. + * operation - uint8_t, XENCAMERA_OP_* - copied from request. + * status - int32_t, response status, zero on success and -XEN_EXX on failure. + * + * + * Configuration response - response for XENCAMERA_OP_CONFIG_SET, + * XENCAMERA_OP_CONFIG_GET and XENCAMERA_OP_CONFIG_VALIDATE requests: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_CONFIG_XXX | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | status | 8 + * +----------------+----------------+----------------+----------------+ + * | pixel format | 12 + * +----------------+----------------+----------------+----------------+ + * | width | 16 + * +----------------+----------------+----------------+----------------+ + * | height | 20 + * +----------------+----------------+----------------+----------------+ + * | colorspace | 24 + * +----------------+----------------+----------------+----------------+ + * | xfer_func | 28 + * +----------------+----------------+----------------+----------------+ + * | ycbcr_enc | 32 + * +----------------+----------------+----------------+----------------+ + * | quantization | 36 + * +----------------+----------------+----------------+----------------+ + * | displ_asp_ratio_numer | 40 + * +----------------+----------------+----------------+----------------+ + * | displ_asp_ratio_denom | 44 + * +----------------+----------------+----------------+----------------+ + * | frame_rate_numer | 48 + * +----------------+----------------+----------------+----------------+ + * | frame_rate_denom | 52 + * +----------------+----------------+----------------+----------------+ + * | reserved | 56 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * Meaning of the corresponding values in this response is the same as for + * XENCAMERA_OP_CONFIG_SET and XENCAMERA_OP_FRAME_RATE_SET requests. + * + * colorspace - uint32_t, this supplements pixel_format parameter, + * one of the XENCAMERA_COLORSPACE_XXX. + * xfer_func - uint32_t, this supplements colorspace parameter, + * one of the XENCAMERA_XFER_FUNC_XXX. + * ycbcr_enc - uint32_t, this supplements colorspace parameter, + * one of the XENCAMERA_YCBCR_ENC_XXX. Please note, that ycbcr_enc is only + * valid for YCbCr pixelformats and should be ignored otherwise. + * quantization - uint32_t, this supplements colorspace parameter, + * one of the XENCAMERA_QUANTIZATION_XXX. + * displ_asp_ratio_numer - uint32_t, numerator of the display aspect ratio. + * displ_asp_ratio_denom - uint32_t, denominator of the display aspect ratio. + */ +struct xencamera_config_resp { + uint32_t pixel_format; + uint32_t width; + uint32_t height; + uint32_t colorspace; + uint32_t xfer_func; + uint32_t ycbcr_enc; + uint32_t quantization; + uint32_t displ_asp_ratio_numer; + uint32_t displ_asp_ratio_denom; + uint32_t frame_rate_numer; + uint32_t frame_rate_denom; +}; + +/* + * Request buffer response - response for XENCAMERA_OP_BUF_GET_LAYOUT + * request: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id |_BUF_GET_LAYOUT | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | status | 8 + * +----------------+----------------+----------------+----------------+ + * | num_planes | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | size | 16 + * +----------------+----------------+----------------+----------------+ + * | plane_size[0] | 20 + * +----------------+----------------+----------------+----------------+ + * | plane_size[1] | 24 + * +----------------+----------------+----------------+----------------+ + * | plane_size[2] | 28 + * +----------------+----------------+----------------+----------------+ + * | plane_size[3] | 32 + * +----------------+----------------+----------------+----------------+ + * | plane_stride[0] | 36 + * +----------------+----------------+----------------+----------------+ + * | plane_stride[1] | 40 + * +----------------+----------------+----------------+----------------+ + * | plane_stride[2] | 44 + * +----------------+----------------+----------------+----------------+ + * | plane_stride[3] | 48 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * num_planes - uint8_t, number of planes of the buffer. + * size - uint32_t, overall size of the buffer including sizes of the + * individual planes and padding if applicable. + * plane_size - array of uint32_t, size in octets of the corresponding plane + * including padding. + * plane_stride - array of uint32_t, size in octets occupied by the + * corresponding single image line including padding if applicable. + * + * Note! The sizes and strides in this response apply to all buffers created + * with XENCAMERA_OP_BUF_CREATE command, but individual buffers may have + * different plane offsets, see XENCAMERA_OP_BUF_REQUEST.plane_offset. + */ +struct xencamera_buf_get_layout_resp { + uint8_t num_planes; + uint8_t reserved[3]; + uint32_t size; + uint32_t plane_size[XENCAMERA_MAX_PLANE]; + uint32_t plane_stride[XENCAMERA_MAX_PLANE]; +}; + +/* + * Request buffer response - response for XENCAMERA_OP_BUF_REQUEST + * request: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id |_OP_BUF_REQUEST | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | status | 8 + * +----------------+----------------+----------------+----------------+ + * | num_buffers | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * num_buffers - uint8_t, number of buffers to be used. + * + * + * Control enumerate response - response for XENCAMERA_OP_CTRL_ENUM: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_CTRL_ENUM | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | status | 8 + * +----------------+----------------+----------------+----------------+ + * | index | type | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | flags | 16 + * +----------------+----------------+----------------+----------------+ + * | min low 32-bits | 20 + * +----------------+----------------+----------------+----------------+ + * | min high 32-bits | 24 + * +----------------+----------------+----------------+----------------+ + * | max low 32-bits | 28 + * +----------------+----------------+----------------+----------------+ + * | max high 32-bits | 32 + * +----------------+----------------+----------------+----------------+ + * | step low 32-bits | 36 + * +----------------+----------------+----------------+----------------+ + * | step high 32-bits | 40 + * +----------------+----------------+----------------+----------------+ + * | def_val low 32-bits | 44 + * +----------------+----------------+----------------+----------------+ + * | def_val high 32-bits | 48 + * +----------------+----------------+----------------+----------------+ + * | reserved | 52 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * index - uint8_t, index of the camera control in response. + * type - uint8_t, type of the control, one of the XENCAMERA_CTRL_XXX. + * flags - uint32_t, flags of the control, one of the XENCAMERA_CTRL_FLG_XXX. + * min - int64_t, minimum value of the control. + * max - int64_t, maximum value of the control. + * step - int64_t, minimum size in which control value can be changed. + * def_val - int64_t, default value of the control. + */ +struct xencamera_ctrl_enum_resp { + uint8_t index; + uint8_t type; + uint8_t reserved[2]; + uint32_t flags; + int64_t min; + int64_t max; + int64_t step; + int64_t def_val; +}; + +/* + * Get control response - response for XENCAMERA_OP_CTRL_GET: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | _OP_CTRL_GET | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | status | 8 + * +----------------+----------------+----------------+----------------+ + * | type | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * | reserved | 20 + * +----------------+----------------+----------------+----------------+ + * | value low 32-bit | 24 + * +----------------+----------------+----------------+----------------+ + * | value high 32-bit | 28 + * +----------------+----------------+----------------+----------------+ + * | reserved | 32 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * type - uint8_t, type of the control, one of the XENCAMERA_CTRL_XXX. + * value - int64_t, new value of the control. + */ + +/* + *----------------------------------- Events ---------------------------------- + * + * Events are sent via a shared page allocated by the front and propagated by + * evt-event-channel/evt-ring-ref XenStore entries. + * + * All event packets have the same length (64 octets). + * All event packets have common header: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id | type | reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * + * id - uint16_t, event id, may be used by front. + * type - uint8_t, type of the event. + * + * + * Frame captured event - event from back to front when a new captured + * frame is available: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id |_EVT_FRAME_AVAIL| reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | index | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | used_sz | 16 + * +----------------+----------------+----------------+----------------+ + * | seq_num | 20 + * +----------------+----------------+----------------+----------------+ + * | reserved | 24 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * index - uint8_t, index of the buffer that contains new captured frame, + * see XENCAMERA_OP_BUF_CREATE description on the range + * used_sz - uint32_t, number of octets this frame has. This can be less + * than the XENCAMERA_OP_BUF_REQUEST.size (response) for compressed formats. + * seq_num - uint32_t, sequential number of the frame. Must be + * monotonically increasing. If skips are detected in seq_num then that + * means that the frames in-between were dropped. Note however that not + * all video capture hardware is capable of detecting dropped frames. + * In that case there will be no skips in the sequence counter. + */ +struct xencamera_frame_avail_evt { + uint8_t index; + uint8_t reserved[3]; + uint32_t used_sz; + uint32_t seq_num; +}; + +/* + * Control change event- event from back to front when camera control + * has changed: + * 0 1 2 3 octet + * +----------------+----------------+----------------+----------------+ + * | id |_EVT_CTRL_CHANGE| reserved | 4 + * +----------------+----------------+----------------+----------------+ + * | type | reserved | 8 + * +----------------+----------------+----------------+----------------+ + * | reserved | 12 + * +----------------+----------------+----------------+----------------+ + * | reserved | 16 + * +----------------+----------------+----------------+----------------+ + * | value low 32-bit | 20 + * +----------------+----------------+----------------+----------------+ + * | value high 32-bit | 24 + * +----------------+----------------+----------------+----------------+ + * | reserved | 28 + * +----------------+----------------+----------------+----------------+ + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/| + * +----------------+----------------+----------------+----------------+ + * | reserved | 64 + * +----------------+----------------+----------------+----------------+ + * + * type - uint8_t, type of the control, one of the XENCAMERA_CTRL_XXX. + * value - int64_t, new value of the control. + * + * Notes: + * - this event is not sent for write-only controls + * - this event is not sent to the originator of the control change + * - this event is not sent when frontend first connects, e.g. initial + * control state must be explicitly queried + */ + +struct xencamera_req { + uint16_t id; + uint8_t operation; + uint8_t reserved[5]; + union { + struct xencamera_config_req config; + struct xencamera_frame_rate_req frame_rate; + struct xencamera_buf_request buf_request; + struct xencamera_buf_create_req buf_create; + struct xencamera_index index; + struct xencamera_ctrl_value ctrl_value; + struct xencamera_get_ctrl_req get_ctrl; + uint8_t reserved[56]; + } req; +}; + +struct xencamera_resp { + uint16_t id; + uint8_t operation; + uint8_t reserved; + int32_t status; + union { + struct xencamera_config_resp config; + struct xencamera_buf_get_layout_resp buf_layout; + struct xencamera_buf_request buf_request; + struct xencamera_ctrl_enum_resp ctrl_enum; + struct xencamera_ctrl_value ctrl_value; + uint8_t reserved1[56]; + } resp; +}; + +struct xencamera_evt { + uint16_t id; + uint8_t type; + uint8_t reserved[5]; + union { + struct xencamera_frame_avail_evt frame_avail; + struct xencamera_ctrl_value ctrl_value; + uint8_t reserved[56]; + } evt; +}; + +DEFINE_RING_TYPES(xen_cameraif, struct xencamera_req, struct xencamera_resp); + +/* + ****************************************************************************** + * Back to front events delivery + ****************************************************************************** + * In order to deliver asynchronous events from back to front a shared page is + * allocated by front and its granted reference propagated to back via + * XenStore entries (evt-ring-ref/evt-event-channel). + * This page has a common header used by both front and back to synchronize + * access and control event's ring buffer, while back being a producer of the + * events and front being a consumer. The rest of the page after the header + * is used for event packets. + * + * Upon reception of an event(s) front may confirm its reception + * for either each event, group of events or none. + */ + +struct xencamera_event_page { + uint32_t in_cons; + uint32_t in_prod; + uint8_t reserved[56]; +}; + +#define XENCAMERA_EVENT_PAGE_SIZE 4096 +#define XENCAMERA_IN_RING_OFFS (sizeof(struct xencamera_event_page)) +#define XENCAMERA_IN_RING_SIZE (XENCAMERA_EVENT_PAGE_SIZE - XENCAMERA_IN_RING_OFFS) +#define XENCAMERA_IN_RING_LEN (XENCAMERA_IN_RING_SIZE / sizeof(struct xencamera_evt)) +#define XENCAMERA_IN_RING(page) \ + ((struct xencamera_evt *)((char *)(page) + XENCAMERA_IN_RING_OFFS)) +#define XENCAMERA_IN_RING_REF(page, idx) \ + (XENCAMERA_IN_RING((page))[(idx) % XENCAMERA_IN_RING_LEN]) + +#endif /* __XEN_PUBLIC_IO_CAMERAIF_H__ */ + +/* + * Local variables: + * mode: C + * c-file-style: "BSD" + * c-basic-offset: 4 + * tab-width: 4 + * indent-tabs-mode: nil + * End: + */ -- 2.20.1
