> On Jan 6, 2019, at 10:22 PM, Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> wrote:
>
> Hi Randy,
>
> Thanks a lot for this patches. They are really useful
> to provide more insight into the VPU hardware.
>
> This change will make the vpu encoder and vpu decoder
> completely independent, can they really work in parallel?
As I said it depends on the platform, but with this patch, the user space would think they can work at the same time. BTW, not only the decoder, there is a post processor with the decoder, it can be used as part of the decoder pipeline with only a macro block delay or process the data from an external buffer.
I forget to write a note on what this driver doesn’t present. The real one would have much complex scheduler system, but this one is just a queue. More task management feature are not there.
Also the clock boosting is removing and the loading analysis, which are useful for encoder, especially on the rv1108.
> Could you provide more details about what is
> shared between these devices?
No, if Rockchip doesn’t tell, my mouth is sealed.
> Thanks a lot!
>
>> On Sun, 2019-01-06 at 02:31 +0800, Randy Li wrote:
>> It offers an example how a full features video codec
>> should be configured.
>>
>> The original clocks assignment don't look good, if the clocks
>> lower than 300MHZ, most of decoing tasks would suffer from
>> timeout problem, 500MHZ is also a little high for RK3399
>> running in a stable state.
>>
>> Signed-off-by: Randy Li <ayaka@xxxxxxxxxxx>
>> ---
>> .../boot/dts/rockchip/rk3399-sapphire.dtsi | 29 ++++++++
>> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 68 +++++++++++++++++--
>> 2 files changed, 90 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
>> index 946d3589575a..c3db878bae45 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
>> @@ -632,6 +632,35 @@
>> dr_mode = "host";
>> };
>>
>> +&rkvdec {
>> + status = "okay";
>> +};
>> +
>> +&rkvdec_srv {
>> + status = "okay";
>> +};
>> +
>> +&vdec_mmu {
>> + status = "okay";
>> +};
>> +
>> +&vdpu {
>> + status = "okay";
>> +};
>> +
>> +&vepu {
>> + status = "okay";
>> +};
>> +
>> +&vpu_service {
>> + status = "okay";
>> +};
>> +
>> +&vpu_mmu {
>> + status = "okay";
>> +
>> +};
>> +
>> &vopb {
>> status = "okay";
>> };
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> index b22b2e40422b..5fa3247e7bf0 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -1242,16 +1242,39 @@
>> status = "disabled";
>> };
>>
>> - vpu: video-codec@ff650000 {
>> - compatible = "rockchip,rk3399-vpu";
>> - reg = <0x0 0xff650000 0x0 0x800>;
>> - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
>> - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
>> - interrupt-names = "vepu", "vdpu";
>> + vpu_service: vpu-srv {
>> + compatible = "rockchip,mpp-service";
>> + status = "disabled";
>> + };
>> +
>> + vepu: vpu-encoder@ff650000 {
>> + compatible = "rockchip,vpu-encoder-v2";
>> + reg = <0x0 0xff650000 0x0 0x400>;
>> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
>> + interrupt-names = "irq_enc";
>> clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
>> - clock-names = "aclk", "hclk";
>> + clock-names = "aclk_vcodec", "hclk_vcodec";
>> + resets = <&cru SRST_H_VCODEC>, <&cru SRST_A_VCODEC>;
>> + reset-names = "video_h", "video_a";
>> iommus = <&vpu_mmu>;
>> power-domains = <&power RK3399_PD_VCODEC>;
>> + rockchip,srv = <&vpu_service>;
>> + status = "disabled";
>> + };
>> +
>> + vdpu: vpu-decoder@ff650400 {
>> + compatible = "rockchip,vpu-decoder-v2";
>> + reg = <0x0 0xff650400 0x0 0x400>;
>> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
>> + interrupt-names = "irq_dec";
>> + iommus = <&vpu_mmu>;
>> + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
>> + clock-names = "aclk_vcodec", "hclk_vcodec";
>> + resets = <&cru SRST_H_VCODEC>, <&cru SRST_A_VCODEC>;
>> + reset-names = "video_h", "video_a";
>> + power-domains = <&power RK3399_PD_VCODEC>;
>> + rockchip,srv = <&vpu_service>;
>> + status = "disabled";
>> };
>>
>> vpu_mmu: iommu@ff650800 {
>> @@ -1261,11 +1284,42 @@
>> interrupt-names = "vpu_mmu";
>> clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
>> clock-names = "aclk", "iface";
>> + assigned-clocks = <&cru ACLK_VCODEC_PRE>;
>> + assigned-clock-parents = <&cru PLL_GPLL>;
>> #iommu-cells = <0>;
>> power-domains = <&power RK3399_PD_VCODEC>;
>> status = "disabled";
>> };
>>
>> + rkvdec_srv: rkvdec-srv {
>> + compatible = "rockchip,mpp-service";
>> + status = "disabled";
>> + };
>> +
>> + rkvdec: video-decoder@ff660000 {
>> + compatible = "rockchip,video-decoder-v1";
>> + reg = <0x0 0xff660000 0x0 0x400>;
>> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
>> + interrupt-names = "irq_dec";
>> + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
>> + <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
>> + clock-names = "aclk_vcodec", "hclk_vcodec",
>> + "clk_cabac", "clk_core";
>> + assigned-clocks = <&cru ACLK_VDU_PRE>, <&cru SCLK_VDU_CA>,
>> + <&cru SCLK_VDU_CORE>;
>> + assigned-clock-parents = <&cru PLL_NPLL>, <&cru PLL_NPLL>,
>> + <&cru PLL_NPLL>;
>> + resets = <&cru SRST_H_VDU>, <&cru SRST_A_VDU>,
>> + <&cru SRST_VDU_CORE>, <&cru SRST_VDU_CA>,
>> + <&cru SRST_A_VDU_NOC>, <&cru SRST_H_VDU_NOC>;
>> + reset-names = "video_h", "video_a", "video_core", "video_cabac",
>> + "niu_a", "niu_h";
>> + power-domains = <&power RK3399_PD_VDU>;
>> + rockchip,srv = <&rkvdec_srv>;
>> + iommus = <&vdec_mmu>;
>> + status = "disabled";
>> + };
>> +
>> vdec_mmu: iommu@ff660480 {
>> compatible = "rockchip,iommu";
>> reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
>
>
