Getting the Xtal trim property to check if running is less error prone.
Reset if_frequency if state is unknown.
Replaces the previous "garbage check".
Signed-off-by: Brad Love <brad@xxxxxxxxxxxxxxxx>
---
drivers/media/tuners/si2157.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index 3924c42..f3a60a1 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -90,24 +90,23 @@ static int si2157_init(struct dvb_frontend *fe)
struct si2157_cmd cmd;
const struct firmware *fw;
const char *fw_name;
- unsigned int uitmp, chip_id;
+ unsigned int chip_id, xtal_trim;
dev_dbg(&client->dev, "\n");
- /* Returned IF frequency is garbage when firmware is not running */
- memcpy(cmd.args, "\x15\x00\x06\x07", 4);
+ /* Try to get Xtal trim property, to verify tuner still running */
+ memcpy(cmd.args, "\x15\x00\x04\x02", 4);
cmd.wlen = 4;
cmd.rlen = 4;
ret = si2157_cmd_execute(client, &cmd);
- if (ret)
- goto err;
- uitmp = cmd.args[2] << 0 | cmd.args[3] << 8;
- dev_dbg(&client->dev, "if_frequency kHz=%u\n", uitmp);
+ xtal_trim = cmd.args[2] | (cmd.args[3] << 8);
- if (uitmp == dev->if_frequency / 1000)
+ if ((ret == 0) && (xtal_trim < 16))
goto warm;
+ dev->if_frequency = 0; /* we no longer know current tuner state */
+
/* power up */
if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
--
2.7.4
