From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
Add a node for the UART part of WiLink chip.
Cc: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
This is compile tested only!
---
arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 8 ++++++++
arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 8 ++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 285681d7af49..8bb4298ca05e 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -52,3 +52,11 @@
interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */
};
};
+
+&uart2 {
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+ max-speed = <300000>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 1adc73bd2ca0..03be171e9de7 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -74,3 +74,11 @@
interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
};
};
+
+&uart2 {
+ bluetooth {
+ compatible = "ti,wl1835-st";
+ enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+ max-speed = <300000>;
+ };
+};
--
2.19.2
