Hello Yong, Could you please have a look at the crash reported below ? On Tuesday, 11 December 2018 16:20:43 EET Laurent Pinchart wrote: > On Tuesday, 11 December 2018 15:43:53 EET Laurent Pinchart wrote: > > On Tuesday, 11 December 2018 15:34:49 EET Laurent Pinchart wrote: > >> On Wednesday, 5 December 2018 02:30:46 EET Mani, Rajmohan wrote: > >> > >> [snip] > >> > >>> I can see a couple of steps missing in the script below. > >>> (https://lists.libcamera.org/pipermail/libcamera-devel/2018-November/0 > >>> 00040.html) > >>> > >>> From patch 02 of this v7 series "doc-rst: Add Intel IPU3 > >>> documentation", > >>> under section "Configuring ImgU V4L2 subdev for image processing"... > >>> > >>> 1. The pipe mode needs to be configured for the V4L2 subdev. > >>> > >>> Also the pipe mode of the corresponding V4L2 subdev should be set as > >>> desired (e.g 0 for video mode or 1 for still mode) through the control > >>> id 0x009819a1 as below. > >>> > >>> e.g v4l2n -d /dev/v4l-subdev7 --ctrl=0x009819A1=1 > >> > >> I assume the control takes a valid default value ? It's better to set it > >> explicitly anyway, so I'll do so. > >> > >>> 2. ImgU pipeline needs to be configured for image processing as below. > >>> > >>> RAW bayer frames go through the following ISP pipeline HW blocks to > >>> have the processed image output to the DDR memory. > >>> > >>> RAW bayer frame -> Input Feeder -> Bayer Down Scaling (BDS) -> > >>> Geometric Distortion Correction (GDC) -> DDR > >>> > >>> The ImgU V4L2 subdev has to be configured with the supported > >>> resolutions in all the above HW blocks, for a given input resolution. > >>> > >>> For a given supported resolution for an input frame, the Input Feeder, > >>> Bayer Down Scaling and GDC blocks should be configured with the > >>> supported resolutions. This information can be obtained by looking at > >>> the following IPU3 ISP configuration table for ov5670 sensor. > >>> > >>> https://chromium.googlesource.com/chromiumos/overlays/board-overlays/+ > >>> /master/baseboard-poppy/media-libs/cros-camera-hal-configs-poppy/files/ > >>> gcss/graph_settings_ov5670.xml > >>> > >>> For the ov5670 example, for an input frame with a resolution of > >>> 2592x1944 (which is input to the ImgU subdev pad 0), the corresponding > >>> resolutions for input feeder, BDS and GDC are 2592x1944, 2592x1944 and > >>> 2560x1920 respectively. > >> > >> How is the GDC output resolution computed from the input resolution ? > >> Does the GDC always consume 32 columns and 22 lines ? > >> > >>> The following steps prepare the ImgU ISP pipeline for the image > >>> processing. > >>> > >>> 1. The ImgU V4L2 subdev data format should be set by using the > >>> VIDIOC_SUBDEV_S_FMT on pad 0, using the GDC width and height obtained > >>> above. > >> > >> If I understand things correctly, the GDC resolution is the pipeline > >> output resolution. Why is it configured on pad 0 ? > >> > >>> 2. The ImgU V4L2 subdev cropping should be set by using the > >>> VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_CROP as the > >>> target, using the input feeder height and width. > >>> > >>> 3. The ImgU V4L2 subdev composing should be set by using the > >>> VIDIOC_SUBDEV_S_SELECTION on pad 0, with V4L2_SEL_TGT_COMPOSE as the > >>> target, using the BDS height and width. > >>> > >>> Once these 2 steps are done, the raw bayer frames can be input to the > >>> ImgU V4L2 subdev for processing. > >> > >> Do I need to capture from both the output and viewfinder nodes ? How are > >> they related to the IF -> BDS -> GDC pipeline, are they both fed from > >> the GDC output ? If so, how does the viewfinder scaler fit in that > >> picture ? > >> > >> I have tried the above configuration with the IPU3 v8 driver, and while > >> the kernel doesn't crash, no images get processed. The userspace > >> processes wait forever for buffers to be ready. I then configured pad 2 > >> to 2560x1920 and pad 3 to 1920x1080, and managed to capture images \o/ > >> > >> There's one problem though: during capture, or very soon after it, the > >> machine locks up completely. I suspect a memory corruption, as when it > >> doesn't log immediately commands such as dmesg will not produce any > >> output and just block, until the system freezes soon after (especially > >> when moving the mouse). > >> > >> I would still call this an improvement to some extent, but there's > >> definitely room for more improvements :-) > >> > >> To reproduce the issue, you can run the ipu3-process.sh script (attached > >> to this e-mail) with the following arguments: > >> > >> $ ipu3-process.sh --out 2560x1920 frame-2592x1944.cio2 > > This should have read > > $ ipu3-process.sh --out 2560x1920 --vf 1920x1080 frame-2592x1944.cio2 > > Without the --vf argument no images are processed. > > It seems that the Intel mail server blocked the mail that contained the > script. You can find a copy at http://paste.debian.net/hidden/fd5bb8df/. > > >> frame-2592x1944.cio2 is a binary file containing a 2592x1944 images in > >> the IPU3-specific Bayer format (for a total of 6469632 bytes). > > > > I managed to get the dmesg output, and it doesn't look pretty. > > > > [ 571.217192] WARNING: CPU: 3 PID: 1303 at /home/laurent/src/iob/oss/ > > libcamera/linux/drivers/staging/media/ipu3/ipu3-dmamap.c:172 > > ipu3_dmamap_unmap+0x30/0x75 [ipu3_imgu] > > [ 571.217196] Modules linked in: asix usbnet mii zram arc4 iwlmvm > > mac80211 > > iwlwifi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp cfg80211 > > 8250_dw hid_multitouch ipu3_cio2 ipu3_imgu(C) videobuf2_dma_sg > > videobuf2_memops videobuf2_v4l2 videobuf2_common processor_thermal_device > > intel_soc_dts_iosf ov13858 dw9714 ov5670 v4l2_fwnode v4l2_common videodev > > at24 media int3403_thermal int340x_thermal_zone cros_ec_lpcs cros_ec_core > > int3400_thermal chromeos_pstore mac_hid acpi_thermal_rel autofs4 usbhid > > mmc_block hid_generic i915 video i2c_algo_bit drm_kms_helper syscopyarea > > sysfillrect sdhci_pci sysimgblt fb_sys_fops cqhci sdhci drm > > drm_panel_orientation_quirks i2c_hid hid > > [ 571.217254] CPU: 3 PID: 1303 Comm: yavta Tainted: G C > > 4.20.0-rc6+ #2 > > [ 571.217256] Hardware name: HP Soraka/Soraka, BIOS 08/30/2018 > > [ 571.217267] RIP: 0010:ipu3_dmamap_unmap+0x30/0x75 [ipu3_imgu] > > [ 571.217271] Code: 54 55 48 8d af d0 6e 00 00 53 48 8b 76 10 49 89 fc f3 > > 48 0f bc 8f f0 6e 00 00 48 89 ef 48 d3 ee e8 e6 73 d9 e6 48 85 c0 75 07 > > <0f> 0b 5b 5d 41 5c c3 48 8b 70 20 48 89 c3 48 8b 40 18 49 8b bc 24 > > [ 571.217274] RSP: 0018:ffffb675021c7b38 EFLAGS: 00010246 > > [ 571.217278] RAX: 0000000000000000 RBX: ffff8f5cf58f8448 RCX: > > 000000000000000c > > [ 571.217280] RDX: 0000000000000000 RSI: 0000000000000202 RDI: > > 00000000ffffffff > > [ 571.217283] RBP: ffff8f5cf58f6ef8 R08: 00000000000006c5 R09: > > ffff8f5cfaba16f0 > > [ 571.217286] R10: ffff8f5cbf508f98 R11: 000000e03da27aba R12: > > ffff8f5cf58f0028 > > [ 571.217289] R13: ffff8f5cf58f0028 R14: 0000000000000000 R15: > > ffff8f5cf58f04e8 > > [ 571.217293] FS: 00007f85d009c700(0000) GS:ffff8f5cfab80000(0000) > > knlGS: > > 0000000000000000 > > [ 571.217296] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 571.217299] CR2: 00007f3440fce4b0 CR3: 000000014abf2001 CR4: > > 00000000003606e0 > > [ 571.217301] Call Trace: > > [ 571.217316] ipu3_dmamap_free+0x5b/0x8f [ipu3_imgu] > > [ 571.217326] ipu3_css_pool_cleanup+0x25/0x2f [ipu3_imgu] > > [ 571.217338] ipu3_css_pipeline_cleanup+0x59/0x8f [ipu3_imgu] > > [ 571.217348] ipu3_css_stop_streaming+0x15b/0x20f [ipu3_imgu] > > [ 571.217360] imgu_s_stream+0x5a/0x30a [ipu3_imgu] > > [ 571.217371] ? ipu3_all_nodes_streaming+0x14f/0x16b [ipu3_imgu] > > [ 571.217382] ipu3_vb2_stop_streaming+0xe4/0x10f [ipu3_imgu] > > [ 571.217392] __vb2_queue_cancel+0x2b/0x1b8 [videobuf2_common] > > [ 571.217402] vb2_core_streamoff+0x30/0x71 [videobuf2_common] > > [ 571.217418] __video_do_ioctl+0x258/0x38e [videodev] > > [ 571.217438] video_usercopy+0x25f/0x4e5 [videodev] > > [ 571.217453] ? copy_overflow+0x14/0x14 [videodev] > > [ 571.217471] v4l2_ioctl+0x4d/0x58 [videodev] > > [ 571.217480] vfs_ioctl+0x1e/0x2b > > [ 571.217486] do_vfs_ioctl+0x531/0x559 > > [ 571.217494] ? vfs_write+0xd1/0xdf > > [ 571.217500] ksys_ioctl+0x50/0x70 > > [ 571.217506] __x64_sys_ioctl+0x16/0x19 > > [ 571.217512] do_syscall_64+0x53/0x60 > > [ 571.217519] entry_SYSCALL_64_after_hwframe+0x44/0xa9 > > [ 571.217524] RIP: 0033:0x7f85cf9b9f47 > > [ 571.217528] Code: 00 00 00 48 8b 05 51 6f 2c 00 64 c7 00 26 00 00 00 48 > > c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 > > <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48 > > [ 571.217531] RSP: 002b:00007ffc59056b78 EFLAGS: 00000246 ORIG_RAX: > > 0000000000000010 > > [ 571.217535] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: > > 00007f85cf9b9f47 > > [ 571.217537] RDX: 00007ffc59056b84 RSI: 0000000040045613 RDI: > > 0000000000000003 > > [ 571.217540] RBP: 000055f4c4dc0af8 R08: 00007f85cd7c4000 R09: > > 00007f85d009c700 > > [ 571.217542] R10: 0000000000000020 R11: 0000000000000246 R12: > > 000055f4c4dc0b06 > > [ 571.217545] R13: 0000000000000004 R14: 00007ffc59056d50 R15: > > 00007ffc59057825 > > [ 571.217553] ---[ end trace 4b42bd84953eff53 ]--- > > [ 571.318645] ipu3-imgu 0000:00:05.0: wait cio gate idle timeout > > And after fixing another issue in the capture script (which was setting the > format on the ImgU subdev pad 3 to 2560x1920 but capture in 1920x1080), I > now get plenty of the following messages: > > [ 221.366131] BUG: Bad page state in process yavta pfn:14a4ff > [ 221.366134] page:ffffde5d45293fc0 count:-1 mapcount:0 mapping: > 0000000000000000 index:0x0 > [ 221.366137] flags: 0x200000000000000() > [ 221.366140] raw: 0200000000000000 dead000000000100 dead000000000200 > 0000000000000000 > [ 221.366143] raw: 0000000000000000 0000000000000000 ffffffffffffffff > 0000000000000000 > [ 221.366145] page dumped because: nonzero _refcount > [ 221.366147] Modules linked in: asix usbnet mii zram arc4 iwlmvm > intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp mac80211 iwlwifi > cfg80211 hid_multitouch 8250_dw ipu3_cio2 ipu3_imgu(C) videobuf2_dma_sg > videobuf2_memops videobuf2_v4l2 processor_thermal_device videobuf2_common > intel_soc_dts_iosf ov13858 ov5670 dw9714 v4l2_fwnode v4l2_common videodev > media at24 cros_ec_lpcs cros_ec_core int3403_thermal int340x_thermal_zone > chromeos_pstore mac_hid int3400_thermal acpi_thermal_rel autofs4 usbhid > mmc_block hid_generic i915 video i2c_algo_bit drm_kms_helper syscopyarea > sysfillrect sysimgblt fb_sys_fops sdhci_pci cqhci sdhci drm > drm_panel_orientation_quirks i2c_hid hid > [ 221.366172] CPU: 3 PID: 1022 Comm: yavta Tainted: G B WC > 4.20.0-rc6+ #2 > [ 221.366173] Hardware name: HP Soraka/Soraka, BIOS 08/30/2018 > [ 221.366173] Call Trace: > [ 221.366176] dump_stack+0x46/0x59 > [ 221.366179] bad_page+0xf2/0x10c > [ 221.366182] free_pages_check+0x78/0x81 > [ 221.366186] free_pcppages_bulk+0xa6/0x236 > [ 221.366190] free_unref_page+0x4b/0x53 > [ 221.366193] vb2_dma_sg_put+0x95/0xb5 [videobuf2_dma_sg] > [ 221.366197] __vb2_buf_mem_free+0x3a/0x6e [videobuf2_common] > [ 221.366202] __vb2_queue_free+0xe3/0x1be [videobuf2_common] > [ 221.366207] vb2_core_reqbufs+0xe9/0x2cc [videobuf2_common] > [ 221.366212] vb2_ioctl_reqbufs+0x78/0x9e [videobuf2_v4l2] > [ 221.366220] __video_do_ioctl+0x258/0x38e [videodev] > [ 221.366229] video_usercopy+0x25f/0x4e5 [videodev] > [ 221.366237] ? copy_overflow+0x14/0x14 [videodev] > [ 221.366240] ? unmap_region+0xe0/0x10a > [ 221.366250] v4l2_ioctl+0x4d/0x58 [videodev] > [ 221.366253] vfs_ioctl+0x1e/0x2b > [ 221.366255] do_vfs_ioctl+0x531/0x559 > [ 221.366260] ksys_ioctl+0x50/0x70 > [ 221.366263] __x64_sys_ioctl+0x16/0x19 > [ 221.366266] do_syscall_64+0x53/0x60 > [ 221.366269] entry_SYSCALL_64_after_hwframe+0x44/0xa9 > [ 221.366270] RIP: 0033:0x7fbe39f6af47 > [ 221.366272] Code: 00 00 00 48 8b 05 51 6f 2c 00 64 c7 00 26 00 00 00 48 > c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 > <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48 > [ 221.366273] RSP: 002b:00007fff05638e68 EFLAGS: 00000246 ORIG_RAX: > 0000000000000010 > [ 221.366275] RAX: ffffffffffffffda RBX: 0000000000000007 RCX: > 00007fbe39f6af47 > [ 221.366279] RDX: 00007fff05638f90 RSI: 00000000c0145608 RDI: > 0000000000000003 > [ 221.366283] RBP: 0000000000000004 R08: 0000000000000000 R09: > 0000000000000045 > [ 221.366287] R10: 0000000000000557 R11: 0000000000000246 R12: > 000055c83bd76750 > [ 221.366290] R13: 000055c83b6b26a0 R14: 0000000000000001 R15: > 00007fff0563a825 -- Regards, Laurent Pinchart
