Hi Laurent, Niklas,
On Tue, Dec 11, 2018 at 03:01:15AM +0100, Niklas Söderlund wrote:
> Hi Laurent,
>
> Thanks for your feedback,
>
> On 2018-12-10 22:16:52 +0200, Laurent Pinchart wrote:
> > Hi Jacopo,
> >
> > Thank you for the patch.
> >
> > On Monday, 10 December 2018 16:53:55 EET Jacopo Mondi wrote:
> > > The PHTW selection algorithm implemented in rcsi2_phtw_write_mbps() checks
> > > for lower bound of the interval used to match the desired bandwidth. Use
> > > that in place of the currently used upport bound.
> >
> > The rcsi2_phtw_write_mbps() function performs the following (error handling
> > removed):
> >
> > const struct rcsi2_mbps_reg *value;
> >
> > for (value = values; value->mbps; value++)
> > if (value->mbps >= mbps)
> > break;
> >
> > return rcsi2_phtw_write(priv, value->reg, code);
> >
> > With this patch, an mbps value of 85 will match the second entry in the
> > phtw_mbps_v3m_e3 table:
> >
> > [0] { .mbps = 80, .reg = 0x00 },
> > [1] { .mbps = 90, .reg = 0x20 },
> > ...
> >
> > The datasheet however documents the range 80-89 to map to 0x00.
> >
> > What am I missing ?
>
> I'm afraid you are missing a issue with the original implementation of
> the rcar-csi2 driver (my fault). The issue you point out is a problem
> with the current freq selection logic not the tables themself which
> needs to be corrected.
>
> This patch aligns the table with the other tables in the driver and is
> sound. A patch (Jacopo care to submit it?) is needed to resolve the
> faulty logic in the driver. It should select the range according to
> Laurents findings and not the range above it as the current code does.
>
> >
I've been notified my previous patch broke the matching logic in the
CSI-2 driver, and so to keep it consistent, I basically reverted what
I've done.
Anyway, a re-work of those matching loop and tables is welcome, and as
you suggested in your last email, it should be done not only for PHTW
but for other tables as well.
In the meantime, I think this patch should go in (afaik there have
been no functional changes on E3/V3M) so that we start from a
(slightly suboptimal) fixed point.
Thanks
j
> > > Fixes: 10c08812fe60 ("media: rcar: rcar-csi2: Update V3M/E3 PHTW tables")
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > > ---
> > > drivers/media/platform/rcar-vin/rcar-csi2.c | 62 ++++++++++++-------------
> > > 1 file changed, 31 insertions(+), 31 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > b/drivers/media/platform/rcar-vin/rcar-csi2.c index
> > > 80ad906d1136..7e9cb8bcfe70 100644
> > > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > @@ -152,37 +152,37 @@ static const struct rcsi2_mbps_reg
> > > phtw_mbps_h3_v3h_m3n[] = { };
> > >
> > > static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = {
> > > - { .mbps = 89, .reg = 0x00 },
> > > - { .mbps = 99, .reg = 0x20 },
> > > - { .mbps = 109, .reg = 0x40 },
> > > - { .mbps = 129, .reg = 0x02 },
> > > - { .mbps = 139, .reg = 0x22 },
> > > - { .mbps = 149, .reg = 0x42 },
> > > - { .mbps = 169, .reg = 0x04 },
> > > - { .mbps = 179, .reg = 0x24 },
> > > - { .mbps = 199, .reg = 0x44 },
> > > - { .mbps = 219, .reg = 0x06 },
> > > - { .mbps = 239, .reg = 0x26 },
> > > - { .mbps = 249, .reg = 0x46 },
> > > - { .mbps = 269, .reg = 0x08 },
> > > - { .mbps = 299, .reg = 0x28 },
> > > - { .mbps = 329, .reg = 0x0a },
> > > - { .mbps = 359, .reg = 0x2a },
> > > - { .mbps = 399, .reg = 0x4a },
> > > - { .mbps = 449, .reg = 0x0c },
> > > - { .mbps = 499, .reg = 0x2c },
> > > - { .mbps = 549, .reg = 0x0e },
> > > - { .mbps = 599, .reg = 0x2e },
> > > - { .mbps = 649, .reg = 0x10 },
> > > - { .mbps = 699, .reg = 0x30 },
> > > - { .mbps = 749, .reg = 0x12 },
> > > - { .mbps = 799, .reg = 0x32 },
> > > - { .mbps = 849, .reg = 0x52 },
> > > - { .mbps = 899, .reg = 0x72 },
> > > - { .mbps = 949, .reg = 0x14 },
> > > - { .mbps = 999, .reg = 0x34 },
> > > - { .mbps = 1049, .reg = 0x54 },
> > > - { .mbps = 1099, .reg = 0x74 },
> > > + { .mbps = 80, .reg = 0x00 },
> > > + { .mbps = 90, .reg = 0x20 },
> > > + { .mbps = 100, .reg = 0x40 },
> > > + { .mbps = 110, .reg = 0x02 },
> > > + { .mbps = 130, .reg = 0x22 },
> > > + { .mbps = 140, .reg = 0x42 },
> > > + { .mbps = 150, .reg = 0x04 },
> > > + { .mbps = 170, .reg = 0x24 },
> > > + { .mbps = 180, .reg = 0x44 },
> > > + { .mbps = 200, .reg = 0x06 },
> > > + { .mbps = 220, .reg = 0x26 },
> > > + { .mbps = 240, .reg = 0x46 },
> > > + { .mbps = 250, .reg = 0x08 },
> > > + { .mbps = 270, .reg = 0x28 },
> > > + { .mbps = 300, .reg = 0x0a },
> > > + { .mbps = 330, .reg = 0x2a },
> > > + { .mbps = 360, .reg = 0x4a },
> > > + { .mbps = 400, .reg = 0x0c },
> > > + { .mbps = 450, .reg = 0x2c },
> > > + { .mbps = 500, .reg = 0x0e },
> > > + { .mbps = 550, .reg = 0x2e },
> > > + { .mbps = 600, .reg = 0x10 },
> > > + { .mbps = 650, .reg = 0x30 },
> > > + { .mbps = 700, .reg = 0x12 },
> > > + { .mbps = 750, .reg = 0x32 },
> > > + { .mbps = 800, .reg = 0x52 },
> > > + { .mbps = 850, .reg = 0x72 },
> > > + { .mbps = 900, .reg = 0x14 },
> > > + { .mbps = 950, .reg = 0x34 },
> > > + { .mbps = 1000, .reg = 0x54 },
> > > + { .mbps = 1050, .reg = 0x74 },
> > > { .mbps = 1125, .reg = 0x16 },
> > > { /* sentinel */ },
> > > };
> >
> > --
> > Regards,
> >
> > Laurent Pinchart
> >
> >
> >
>
> --
> Regards,
> Niklas Söderlund
Attachment:
signature.asc
Description: PGP signature
