This series support CSI on Allwinner A64. Allwinner A64 CSI has single channel time-multiplexed BT.656 CMOS sensor interface like H3 but work by lowering clock than default mod clock. Changes for v3: - update dt-bindings for A64 - set mod clock via csi driver - remove assign clocks from dtsi - remove i2c-gpio opendrian - fix avdd and dovdd supplies - remove vcc-csi pin group supply Note: This series created on top of H3 changes [1] [1] https://patchwork.kernel.org/cover/10705905/ Any inputs, Jagan. Jagan Teki (6): dt-bindings: media: sun6i: Add A64 CSI compatible media: sun6i: Add A64 compatible support media: sun6i: Set 300MHz mod clock for A64 arm64: dts: allwinner: a64: Add A64 CSI controller arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1 arm64: dts: allwinner: a64-amarula-relic: Add OV5640 camera node .../devicetree/bindings/media/sun6i-csi.txt | 1 + .../allwinner/sun50i-a64-amarula-relic.dts | 53 +++++++++++++++++++ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 +++++++++ .../platform/sunxi/sun6i-csi/sun6i_csi.c | 6 +++ 4 files changed, 85 insertions(+) -- 2.18.0.321.gffc6fa0e3
