Re: [PATCH v5 02/12] gpu: ipu-csi: Swap fields according to input/output field types

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Philipp, can you review this patch and give it your ack?

Thanks,
Steve


On 10/16/18 5:00 PM, Steve Longerbeam wrote:
The function ipu_csi_init_interface() was inverting the F-bit for
NTSC case, in the CCIR_CODE_1/2 registers. The result being that
for NTSC bottom-top field order, the CSI would swap fields and
capture in top-bottom order.

Instead, base field swap on the field order of the input to the CSI,
and the field order of the requested output. If the input/output
fields are sequential but different, swap fields, otherwise do
not swap. This requires passing both the input and output mbus
frame formats to ipu_csi_init_interface().

Move this code to a new private function ipu_csi_set_bt_interlaced_codes()
that programs the CCIR_CODE_1/2 registers for interlaced BT.656 (and
possibly interlaced BT.1120 in the future).

When detecting input video standard from the input frame width/height,
make sure to double height if input field type is alternate, since
in that case input height only includes lines for one field.

Signed-off-by: Steve Longerbeam <slongerbeam@xxxxxxxxx>
---
Changes since v4:
- Cleaned up some convoluted code in ipu_csi_init_interface(), suggested
   by Philipp Zabel.
- Fixed a regression in csi_setup(), caught by Philipp.
---
  drivers/gpu/ipu-v3/ipu-csi.c              | 119 +++++++++++++++-------
  drivers/staging/media/imx/imx-media-csi.c |  17 +---
  include/video/imx-ipu-v3.h                |   3 +-
  3 files changed, 88 insertions(+), 51 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c
index aa0e30a2ba18..4a15e513fa05 100644
--- a/drivers/gpu/ipu-v3/ipu-csi.c
+++ b/drivers/gpu/ipu-v3/ipu-csi.c
@@ -325,6 +325,15 @@ static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code,
  	return 0;
  }
+/* translate alternate field mode based on given standard */
+static inline enum v4l2_field
+ipu_csi_translate_field(enum v4l2_field field, v4l2_std_id std)
+{
+	return (field != V4L2_FIELD_ALTERNATE) ? field :
+		((std & V4L2_STD_525_60) ?
+		 V4L2_FIELD_SEQ_BT : V4L2_FIELD_SEQ_TB);
+}
+
  /*
   * Fill a CSI bus config struct from mbus_config and mbus_framefmt.
   */
@@ -374,22 +383,75 @@ static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
  	return 0;
  }
+static int ipu_csi_set_bt_interlaced_codes(struct ipu_csi *csi,
+					   struct v4l2_mbus_framefmt *infmt,
+					   struct v4l2_mbus_framefmt *outfmt,
+					   v4l2_std_id std)
+{
+	enum v4l2_field infield, outfield;
+	bool swap_fields;
+
+	/* get translated field type of input and output */
+	infield = ipu_csi_translate_field(infmt->field, std);
+	outfield = ipu_csi_translate_field(outfmt->field, std);
+
+	/*
+	 * Write the H-V-F codes the CSI will match against the
+	 * incoming data for start/end of active and blanking
+	 * field intervals. If input and output field types are
+	 * sequential but not the same (one is SEQ_BT and the other
+	 * is SEQ_TB), swap the F-bit so that the CSI will capture
+	 * field 1 lines before field 0 lines.
+	 */
+	swap_fields = (V4L2_FIELD_IS_SEQUENTIAL(infield) &&
+		       V4L2_FIELD_IS_SEQUENTIAL(outfield) &&
+		       infield != outfield);
+
+	if (!swap_fields) {
+		/*
+		 * Field0BlankEnd  = 110, Field0BlankStart  = 010
+		 * Field0ActiveEnd = 100, Field0ActiveStart = 000
+		 * Field1BlankEnd  = 111, Field1BlankStart  = 011
+		 * Field1ActiveEnd = 101, Field1ActiveStart = 001
+		 */
+		ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN,
+			      CSI_CCIR_CODE_1);
+		ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2);
+	} else {
+		dev_dbg(csi->ipu->dev, "capture field swap\n");
+
+		/* same as above but with F-bit inverted */
+		ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN,
+			      CSI_CCIR_CODE_1);
+		ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2);
+	}
+
+	ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
+
+	return 0;
+}
+
+
  int ipu_csi_init_interface(struct ipu_csi *csi,
  			   struct v4l2_mbus_config *mbus_cfg,
-			   struct v4l2_mbus_framefmt *mbus_fmt)
+			   struct v4l2_mbus_framefmt *infmt,
+			   struct v4l2_mbus_framefmt *outfmt)
  {
  	struct ipu_csi_bus_config cfg;
  	unsigned long flags;
  	u32 width, height, data = 0;
+	v4l2_std_id std;
  	int ret;
- ret = fill_csi_bus_cfg(&cfg, mbus_cfg, mbus_fmt);
+	ret = fill_csi_bus_cfg(&cfg, mbus_cfg, infmt);
  	if (ret < 0)
  		return ret;
/* set default sensor frame width and height */
-	width = mbus_fmt->width;
-	height = mbus_fmt->height;
+	width = infmt->width;
+	height = infmt->height;
+	if (infmt->field == V4L2_FIELD_ALTERNATE)
+		height *= 2;
/* Set the CSI_SENS_CONF register remaining fields */
  	data |= cfg.data_width << CSI_SENS_CONF_DATA_WIDTH_SHIFT |
@@ -416,42 +478,22 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
  		ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
  		break;
  	case IPU_CSI_CLK_MODE_CCIR656_INTERLACED:
-		if (mbus_fmt->width == 720 && mbus_fmt->height == 576) {
-			/*
-			 * PAL case
-			 *
-			 * Field0BlankEnd = 0x6, Field0BlankStart = 0x2,
-			 * Field0ActiveEnd = 0x4, Field0ActiveStart = 0
-			 * Field1BlankEnd = 0x7, Field1BlankStart = 0x3,
-			 * Field1ActiveEnd = 0x5, Field1ActiveStart = 0x1
-			 */
-			height = 625; /* framelines for PAL */
-
-			ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN,
-					  CSI_CCIR_CODE_1);
-			ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2);
-			ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
-		} else if (mbus_fmt->width == 720 && mbus_fmt->height == 480) {
-			/*
-			 * NTSC case
-			 *
-			 * Field0BlankEnd = 0x7, Field0BlankStart = 0x3,
-			 * Field0ActiveEnd = 0x5, Field0ActiveStart = 0x1
-			 * Field1BlankEnd = 0x6, Field1BlankStart = 0x2,
-			 * Field1ActiveEnd = 0x4, Field1ActiveStart = 0
-			 */
-			height = 525; /* framelines for NTSC */
-
-			ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN,
-					  CSI_CCIR_CODE_1);
-			ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2);
-			ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
+		if (width == 720 && height == 480) {
+			std = V4L2_STD_NTSC;
+			height = 525;
+		} else if (width == 720 && height == 576) {
+			std = V4L2_STD_PAL;
+			height = 625;
  		} else {
  			dev_err(csi->ipu->dev,
-				"Unsupported CCIR656 interlaced video mode\n");
-			spin_unlock_irqrestore(&csi->lock, flags);
-			return -EINVAL;
+				"Unsupported interlaced video mode\n");
+			ret = -EINVAL;
+			goto out_unlock;
  		}
+
+		ret = ipu_csi_set_bt_interlaced_codes(csi, infmt, outfmt, std);
+		if (ret)
+			goto out_unlock;
  		break;
  	case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR:
  	case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR:
@@ -476,9 +518,10 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
  	dev_dbg(csi->ipu->dev, "CSI_ACT_FRM_SIZE = 0x%08X\n",
  		ipu_csi_read(csi, CSI_ACT_FRM_SIZE));
+out_unlock:
  	spin_unlock_irqrestore(&csi->lock, flags);
- return 0;
+	return ret;
  }
  EXPORT_SYMBOL_GPL(ipu_csi_init_interface);
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 4223f8d418ae..7ecbd4d76d09 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -663,15 +663,14 @@ static void csi_idmac_stop(struct csi_priv *priv)
  /* Update the CSI whole sensor and active windows */
  static int csi_setup(struct csi_priv *priv)
  {
-	struct v4l2_mbus_framefmt *infmt, *outfmt;
+	struct v4l2_mbus_framefmt infmt, outfmt;
  	const struct imx_media_pixfmt *incc;
  	struct v4l2_mbus_config mbus_cfg;
-	struct v4l2_mbus_framefmt if_fmt;
  	struct v4l2_rect crop;
- infmt = &priv->format_mbus[CSI_SINK_PAD];
+	infmt = priv->format_mbus[CSI_SINK_PAD];
  	incc = priv->cc[CSI_SINK_PAD];
-	outfmt = &priv->format_mbus[priv->active_output_pad];
+	outfmt = priv->format_mbus[priv->active_output_pad];
/* compose mbus_config from the upstream endpoint */
  	mbus_cfg.type = priv->upstream_ep.bus_type;
@@ -679,12 +678,6 @@ static int csi_setup(struct csi_priv *priv)
  		priv->upstream_ep.bus.parallel.flags :
  		priv->upstream_ep.bus.mipi_csi2.flags;
- /*
-	 * we need to pass input frame to CSI interface, but
-	 * with translated field type from output format
-	 */
-	if_fmt = *infmt;
-	if_fmt.field = outfmt->field;
  	crop = priv->crop;
/*
@@ -692,7 +685,7 @@ static int csi_setup(struct csi_priv *priv)
  	 * generic/bayer data
  	 */
  	if (is_parallel_bus(&priv->upstream_ep) && incc->cycles) {
-		if_fmt.width *= incc->cycles;
+		infmt.width *= incc->cycles;
  		crop.width *= incc->cycles;
  	}
@@ -702,7 +695,7 @@ static int csi_setup(struct csi_priv *priv)
  			     priv->crop.width == 2 * priv->compose.width,
  			     priv->crop.height == 2 * priv->compose.height);
- ipu_csi_init_interface(priv->csi, &mbus_cfg, &if_fmt);
+	ipu_csi_init_interface(priv->csi, &mbus_cfg, &infmt, &outfmt);
ipu_csi_set_dest(priv->csi, priv->dest); diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h
index abbad94e14a1..f44a35192313 100644
--- a/include/video/imx-ipu-v3.h
+++ b/include/video/imx-ipu-v3.h
@@ -352,7 +352,8 @@ int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan,
  struct ipu_csi;
  int ipu_csi_init_interface(struct ipu_csi *csi,
  			   struct v4l2_mbus_config *mbus_cfg,
-			   struct v4l2_mbus_framefmt *mbus_fmt);
+			   struct v4l2_mbus_framefmt *infmt,
+			   struct v4l2_mbus_framefmt *outfmt);
  bool ipu_csi_is_interlaced(struct ipu_csi *csi);
  void ipu_csi_get_window(struct ipu_csi *csi, struct v4l2_rect *w);
  void ipu_csi_set_window(struct ipu_csi *csi, struct v4l2_rect *w);




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux