Now that we have some infrastructure for it, allow the MIPI D-PHY phy's to
be configured through the generic functions through a custom structure
added to the generic union.
The parameters added here are the ones defined in the MIPI D-PHY spec, plus
the number of lanes in use. The current set of parameters should cover all
the potential users.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
---
include/linux/phy/phy-mipi-dphy.h | 279 +++++++++++++++++++++++++++++++-
include/linux/phy/phy.h | 6 +-
2 files changed, 285 insertions(+)
create mode 100644 include/linux/phy/phy-mipi-dphy.h
diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h
new file mode 100644
index 000000000000..29bf94db88ad
--- /dev/null
+++ b/include/linux/phy/phy-mipi-dphy.h
@@ -0,0 +1,279 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Cadence Design Systems Inc.
+ */
+
+#ifndef __PHY_MIPI_DPHY_H_
+#define __PHY_MIPI_DPHY_H_
+
+#include <video/videomode.h>
+
+/**
+ * struct phy_configure_opts_mipi_dphy - MIPI D-PHY configuration set
+ *
+ * This structure is used to represent the configuration state of a
+ * MIPI D-PHY phy.
+ */
+struct phy_configure_opts_mipi_dphy {
+ /**
+ * @clk_miss:
+ *
+ * Timeout, in picoseconds, for receiver to detect absence of
+ * Clock transitions and disable the Clock Lane HS-RX.
+ *
+ * Maximum value: 60000 ps
+ */
+ unsigned int clk_miss;
+
+ /**
+ * @clk_post:
+ *
+ * Time, in picoseconds, that the transmitter continues to
+ * send HS clock after the last associated Data Lane has
+ * transitioned to LP Mode. Interval is defined as the period
+ * from the end of @hs_trail to the beginning of @clk_trail.
+ *
+ * Minimum value: 60000 ps + 52 * @hs_clk_rate period in ps
+ */
+ unsigned int clk_post;
+
+ /**
+ * @clk_pre:
+ *
+ * Time, in UI, that the HS clock shall be driven by
+ * the transmitter prior to any associated Data Lane beginning
+ * the transition from LP to HS mode.
+ *
+ * Minimum value: 8 UI
+ */
+ unsigned int clk_pre;
+
+ /**
+ * @clk_prepare:
+ *
+ * Time, in picoseconds, that the transmitter drives the Clock
+ * Lane LP-00 Line state immediately before the HS-0 Line
+ * state starting the HS transmission.
+ *
+ * Minimum value: 38000 ps
+ * Maximum value: 95000 ps
+ */
+ unsigned int clk_prepare;
+
+ /**
+ * @clk_settle:
+ *
+ * Time interval, in picoseconds, during which the HS receiver
+ * should ignore any Clock Lane HS transitions, starting from
+ * the beginning of @clk_prepare.
+ *
+ * Minimum value: 95000 ps
+ * Maximum value: 300000 ps
+ */
+ unsigned int clk_settle;
+
+ /**
+ * @clk_term_en:
+ *
+ * Time, in picoseconds, for the Clock Lane receiver to enable
+ * the HS line termination.
+ *
+ * Maximum value: 38000 ps
+ */
+ unsigned int clk_term_en;
+
+ /**
+ * @clk_trail:
+ *
+ * Time, in picoseconds, that the transmitter drives the HS-0
+ * state after the last payload clock bit of a HS transmission
+ * burst.
+ *
+ * Minimum value: 60000 ps
+ */
+ unsigned int clk_trail;
+
+ /**
+ * @clk_zero:
+ *
+ * Time, in picoseconds, that the transmitter drives the HS-0
+ * state prior to starting the Clock.
+ */
+ unsigned int clk_zero;
+
+ /**
+ * @d_term_en:
+ *
+ * Time, in picoseconds, for the Data Lane receiver to enable
+ * the HS line termination.
+ *
+ * Maximum value: 35000 ps + 4 * @hs_clk_rate period in ps
+ */
+ unsigned int d_term_en;
+
+ /**
+ * @eot:
+ *
+ * Transmitted time interval, in picoseconds, from the start
+ * of @hs_trail or @clk_trail, to the start of the LP- 11
+ * state following a HS burst.
+ *
+ * Maximum value: 105000 ps + 12 * @hs_clk_rate period in ps
+ */
+ unsigned int eot;
+
+ /**
+ * @hs_exit:
+ *
+ * Time, in picoseconds, that the transmitter drives LP-11
+ * following a HS burst.
+ *
+ * Minimum value: 100000 ps
+ */
+ unsigned int hs_exit;
+
+ /**
+ * @hs_prepare:
+ *
+ * Time, in picoseconds, that the transmitter drives the Data
+ * Lane LP-00 Line state immediately before the HS-0 Line
+ * state starting the HS transmission.
+ *
+ * Minimum value: 40000 ps + 4 * @hs_clk_rate period in ps
+ * Maximum value: 85000 ps + 6 * @hs_clk_rate period in ps
+ */
+ unsigned int hs_prepare;
+
+ /**
+ * @hs_settle:
+ *
+ * Time interval, in picoseconds, during which the HS receiver
+ * shall ignore any Data Lane HS transitions, starting from
+ * the beginning of @hs_prepare.
+ *
+ * Minimum value: 85000 ps + 6 * @hs_clk_rate period in ps
+ * Maximum value: 145000 ps + 10 * @hs_clk_rate period in ps
+ */
+ unsigned int hs_settle;
+
+ /**
+ * @hs_skip:
+ *
+ * Time interval, in picoseconds, during which the HS-RX
+ * should ignore any transitions on the Data Lane, following a
+ * HS burst. The end point of the interval is defined as the
+ * beginning of the LP-11 state following the HS burst.
+ *
+ * Minimum value: 40000 ps
+ * Maximum value: 55000 ps + 4 * @hs_clk_rate period in ps
+ */
+ unsigned int hs_skip;
+
+ /**
+ * @hs_trail:
+ *
+ * Time, in picoseconds, that the transmitter drives the
+ * flipped differential state after last payload data bit of a
+ * HS transmission burst
+ *
+ * Minimum value: max(8 * @hs_clk_rate period in ps,
+ * 60000 ps + 4 * @hs_clk_rate period in ps)
+ */
+ unsigned int hs_trail;
+
+ /**
+ * @hs_zero:
+ *
+ * Time, in picoseconds, that the transmitter drives the HS-0
+ * state prior to transmitting the Sync sequence.
+ */
+ unsigned int hs_zero;
+
+ /**
+ * @init:
+ *
+ * Time, in picoseconds for the initialization period to
+ * complete.
+ *
+ * Minimum value: 100000000 ps
+ */
+ unsigned int init;
+
+ /**
+ * @lpx:
+ *
+ * Transmitted length, in picoseconds, of any Low-Power state
+ * period.
+ *
+ * Minimum value: 50000 ps
+ */
+ unsigned int lpx;
+
+ /**
+ * @ta_get:
+ *
+ * Time, in picoseconds, that the new transmitter drives the
+ * Bridge state (LP-00) after accepting control during a Link
+ * Turnaround.
+ *
+ * Value: 5 * @lpx
+ */
+ unsigned int ta_get;
+
+ /**
+ * @ta_go:
+ *
+ * Time, in picoseconds, that the transmitter drives the
+ * Bridge state (LP-00) before releasing control during a Link
+ * Turnaround.
+ *
+ * Value: 4 * @lpx
+ */
+ unsigned int ta_go;
+
+ /**
+ * @ta_sure:
+ *
+ * Time, in picoseconds, that the new transmitter waits after
+ * the LP-10 state before transmitting the Bridge state
+ * (LP-00) during a Link Turnaround.
+ *
+ * Minimum value: @lpx
+ * Maximum value: 2 * @lpx
+ */
+ unsigned int ta_sure;
+
+ /**
+ * @wakeup:
+ *
+ * Time, in picoseconds, that a transmitter drives a Mark-1
+ * state prior to a Stop state in order to initiate an exit
+ * from ULPS.
+ *
+ * Minimum value: 1000000000 ps
+ */
+ unsigned int wakeup;
+
+ /**
+ * @hs_clk_rate:
+ *
+ * Clock rate, in Hertz, of the high-speed clock.
+ */
+ unsigned long hs_clk_rate;
+
+ /**
+ * @lp_clk_rate:
+ *
+ * Clock rate, in Hertz, of the low-power clock.
+ */
+ unsigned long lp_clk_rate;
+
+ /**
+ * @lanes:
+ *
+ * Number of active data lanes used for the transmissions.
+ */
+ unsigned char lanes;
+};
+
+#endif /* __PHY_MIPI_DPHY_H_ */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 04476c026b5a..1fdefadf150a 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -20,6 +20,8 @@
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
struct phy;
enum phy_mode {
@@ -44,8 +46,12 @@ enum phy_mode {
/**
* union phy_configure_opts - Opaque generic phy configuration
+ *
+ * @mipi_dphy: Configuration set applicable for phys supporting
+ * the MIPI_DPHY phy mode.
*/
union phy_configure_opts {
+ struct phy_configure_opts_mipi_dphy mipi_dphy;
};
/**
--
git-series 0.9.1
