Em Fri, 7 Dec 2018 10:09:04 +0100 Hans Verkuil <hverkuil@xxxxxxxxx> escreveu: > This patch selects MEDIA_CONTROLLER for all camera, analog TV and > digital TV drivers and selects VIDEO_V4L2_SUBDEV_API automatically. > > This will allow us to simplify drivers that currently have to add > #ifdef CONFIG_MEDIA_CONTROLLER or #ifdef VIDEO_V4L2_SUBDEV_API > to their code, since now this will always be available. > > The original intent of allowing these to be configured by the > user was (I think) to save a bit of memory. No. The original intent was/is to be sure that adding the media controller support won't be breaking existing working drivers. > But as more and more > drivers have a media controller and all regular distros already > enable one or more of those drivers, the memory for the MC code is > there anyway. > > Complexity has always been the bane of media drivers, so reducing > complexity at the expense of a bit more memory (which is a rounding > error compared to the amount of video buffer memory needed) is IMHO > a good thing. > > Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx> > --- > diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig > index 8add62a18293..56eb01cc8bb4 100644 > --- a/drivers/media/Kconfig > +++ b/drivers/media/Kconfig > @@ -31,6 +31,7 @@ comment "Multimedia core support" > # > config MEDIA_CAMERA_SUPPORT > bool "Cameras/video grabbers support" > + select MEDIA_CONTROLLER > ---help--- > Enable support for webcams and video grabbers. > > @@ -38,6 +39,7 @@ config MEDIA_CAMERA_SUPPORT > > config MEDIA_ANALOG_TV_SUPPORT > bool "Analog TV support" > + select MEDIA_CONTROLLER > ---help--- > Enable analog TV support. > > @@ -50,6 +52,7 @@ config MEDIA_ANALOG_TV_SUPPORT > > config MEDIA_DIGITAL_TV_SUPPORT > bool "Digital TV support" > + select MEDIA_CONTROLLER > ---help--- > Enable digital TV support. See my comments below. > > @@ -95,7 +98,6 @@ source "drivers/media/cec/Kconfig" > > config MEDIA_CONTROLLER > bool "Media Controller API" > - depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT > ---help--- > Enable the media controller API used to query media devices internal > topology and configure it dynamically. I have split comments with regards to it. Yeah, nowadays media controller has becoming more important. Still, a lot of media drivers work fine without them. Anyway, if we're willing to make it mandatory, better to just remove the entire config option or to make it a silent one. > @@ -119,16 +121,11 @@ config VIDEO_DEV > tristate > depends on MEDIA_SUPPORT > depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT > + select VIDEO_V4L2_SUBDEV_API if MEDIA_CONTROLLER > default y > > config VIDEO_V4L2_SUBDEV_API > - bool "V4L2 sub-device userspace API" > - depends on VIDEO_DEV && MEDIA_CONTROLLER > - ---help--- > - Enables the V4L2 sub-device pad-level userspace API used to configure > - video format, size and frame rate between hardware blocks. > - > - This API is mostly used by camera interfaces in embedded platforms. > + bool NACK. There is a very good reason why the subdev API is optional: there are drivers that use camera sensors but are not MC-centric. On those, the USB bridge driver is responsible to setup the subdevice. This options helps to ensure that camera sensors used by such drivers won't stop working because of the lack of the subdev-API. > > source "drivers/media/v4l2-core/Kconfig" > Thanks, Mauro
