Hi Patrick,
On Fri, Dec 07, 2018 at 10:57:21AM +0100, Patrick LERDA wrote:
> Add support for RCMM infrared remote controls.
>
> Signed-off-by: Patrick Lerda <patrick9876@xxxxxxx>
Other than the Signed-off-by this looks exactly like the v2 version;
did you see my other comments on the v2 patch?
Thanks
Sean
> ---
> drivers/media/rc/Kconfig | 10 ++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/ir-rcmm-decoder.c | 185 +++++++++++++++++++++++++++++
> drivers/media/rc/rc-core-priv.h | 5 +
> drivers/media/rc/rc-main.c | 3 +
> include/media/rc-map.h | 6 +-
> include/uapi/linux/lirc.h | 1 +
> tools/include/uapi/linux/lirc.h | 1 +
> 8 files changed, 210 insertions(+), 2 deletions(-)
> create mode 100644 drivers/media/rc/ir-rcmm-decoder.c
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 1021c08a9ba4..b7e08324b874 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -133,6 +133,16 @@ config IR_IMON_DECODER
> remote control and you would like to use it with a raw IR
> receiver, or if you wish to use an encoder to transmit this IR.
>
> +config IR_RCMM_DECODER
> + tristate "Enable IR raw decoder for the RC-MM protocol"
> + depends on RC_CORE
> + select BITREVERSE
> + default y
> +
> + ---help---
> + Enable this option if you have IR with RC-MM protocol, and
> + if the IR is decoded in software
> +
> endif #RC_DECODERS
>
> menuconfig RC_DEVICES
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index e0340d043fe8..fc4058013234 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_IR_SHARP_DECODER) += ir-sharp-decoder.o
> obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o
> obj-$(CONFIG_IR_XMP_DECODER) += ir-xmp-decoder.o
> obj-$(CONFIG_IR_IMON_DECODER) += ir-imon-decoder.o
> +obj-$(CONFIG_IR_RCMM_DECODER) += ir-rcmm-decoder.o
>
> # stand-alone IR receivers/transmitters
> obj-$(CONFIG_RC_ATI_REMOTE) += ati_remote.o
> diff --git a/drivers/media/rc/ir-rcmm-decoder.c b/drivers/media/rc/ir-rcmm-decoder.c
> new file mode 100644
> index 000000000000..94d5b70f7a0f
> --- /dev/null
> +++ b/drivers/media/rc/ir-rcmm-decoder.c
> @@ -0,0 +1,185 @@
> +/* ir-rcmm-decoder.c - A decoder for the RCMM IR protocol
> + *
> + * Copyright (C) 2016 by Patrick Lerda
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include "rc-core-priv.h"
> +#include <linux/module.h>
> +#include <linux/version.h>
> +
> +
> +#define RCMM_UNIT 166667 /* nanosecs */
> +#define RCMM_0_NBITS 64
> +#define RCMM_PREFIX_PULSE 416666 /* 166666.666666666*2.5 */
> +#define RCMM_PULSE_0 277777 /* 166666.666666666*(1+2/3) */
> +#define RCMM_PULSE_1 444444 /* 166666.666666666*(2+2/3) */
> +#define RCMM_PULSE_2 611111 /* 166666.666666666*(3+2/3) */
> +#define RCMM_PULSE_3 777778 /* 166666.666666666*(4+2/3) */
> +#define RCMM_MODE_MASK 0x0000
> +
> +enum rcmm_state {
> + STATE_INACTIVE,
> + STATE_LOW,
> + STATE_BUMP,
> + STATE_VALUE,
> + STATE_FINISHED,
> +};
> +
> +static bool rcmm_mode(struct rcmm_dec *data)
> +{
> + return !((0x000c0000 & data->bits) == 0x000c0000);
> +}
> +
> +/**
> + * ir_rcmm_decode() - Decode one RCMM pulse or space
> + * @dev: the struct rc_dev descriptor of the device
> + * @ev: the struct ir_raw_event descriptor of the pulse/space
> + *
> + * This function returns -EINVAL if the pulse violates the state machine
> + */
> +static int ir_rcmm_decode(struct rc_dev *dev, struct ir_raw_event ev)
> +{
> + struct rcmm_dec *data = &dev->raw->rcmm;
> + u32 scancode;
> + u8 toggle;
> +
> + if (!(dev->enabled_protocols & RC_PROTO_BIT_RCMM))
> + return 0;
> +
> + if (!is_timing_event(ev)) {
> + if (ev.reset)
> + data->state = STATE_INACTIVE;
> + return 0;
> + }
> +
> + if (ev.duration > RCMM_PULSE_3 + RCMM_UNIT)
> + goto out;
> +
> + switch (data->state) {
> +
> + case STATE_INACTIVE:
> + if (!ev.pulse)
> + break;
> +
> + /* Note: larger margin on first pulse since each RCMM_UNIT
> + is quite short and some hardware takes some time to
> + adjust to the signal */
> + if (!eq_margin(ev.duration, RCMM_PREFIX_PULSE, RCMM_UNIT/2))
> + break;
> +
> + data->state = STATE_LOW;
> + data->count = 0;
> + data->bits = 0;
> + return 0;
> +
> + case STATE_LOW:
> + if (ev.pulse)
> + break;
> +
> + /* Note: larger margin on first pulse since each RCMM_UNIT
> + is quite short and some hardware takes some time to
> + adjust to the signal */
> + if (!eq_margin(ev.duration, RCMM_PULSE_0, RCMM_UNIT/2))
> + break;
> +
> + data->state = STATE_BUMP;
> + return 0;
> +
> + case STATE_BUMP:
> + if (!ev.pulse)
> + break;
> +
> + if (!eq_margin(ev.duration, RCMM_UNIT, RCMM_UNIT / 2))
> + break;
> +
> + data->state = STATE_VALUE;
> + return 0;
> +
> + case STATE_VALUE:
> + if (ev.pulse)
> + break;
> + {
> + int value;
> +
> + if (eq_margin(ev.duration, RCMM_PULSE_0, RCMM_UNIT / 2)) {
> + value = 0;
> + } else if (eq_margin(ev.duration, RCMM_PULSE_1, RCMM_UNIT / 2)) {
> + value = 1;
> + } else if (eq_margin(ev.duration, RCMM_PULSE_2, RCMM_UNIT / 2)) {
> + value = 2;
> + } else if (eq_margin(ev.duration, RCMM_PULSE_3, RCMM_UNIT / 2)) {
> + value = 3;
> + } else
> + break;
> +
> + data->bits <<= 2;
> + data->bits |= value;
> + }
> +
> + data->count+=2;
> +
> + if (data->count < 32) {
> + data->state = STATE_BUMP;
> + } else {
> + data->state = STATE_FINISHED;
> + }
> +
> + return 0;
> +
> + case STATE_FINISHED:
> + if (!ev.pulse) break;
> +
> + if (!eq_margin(ev.duration, RCMM_UNIT, RCMM_UNIT / 2))
> + break;
> +
> + if (rcmm_mode(data)) {
> + toggle = !!(0x8000 & data->bits);
> + scancode = data->bits & ~0x8000;
> + } else {
> + toggle = 0;
> + scancode = data->bits;
> + }
> +
> + rc_keydown(dev, RC_PROTO_RCMM, scancode, toggle);
> + data->state = STATE_INACTIVE;
> + return 0;
> + }
> +
> +out:
> + data->state = STATE_INACTIVE;
> + return -EINVAL;
> +}
> +
> +static struct ir_raw_handler rcmm_handler = {
> + .protocols = RC_PROTO_BIT_RCMM,
> + .decode = ir_rcmm_decode,
> +};
> +
> +static int __init ir_rcmm_decode_init(void)
> +{
> + ir_raw_handler_register(&rcmm_handler);
> +
> + printk(KERN_INFO "IR RCMM protocol handler initialized\n");
> + return 0;
> +}
> +
> +static void __exit ir_rcmm_decode_exit(void)
> +{
> + ir_raw_handler_unregister(&rcmm_handler);
> +}
> +
> +module_init(ir_rcmm_decode_init);
> +module_exit(ir_rcmm_decode_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Patrick LERDA");
> +MODULE_DESCRIPTION("RCMM IR protocol decoder");
> diff --git a/drivers/media/rc/rc-core-priv.h b/drivers/media/rc/rc-core-priv.h
> index c2cbe7f6266c..c63d4ad007cc 100644
> --- a/drivers/media/rc/rc-core-priv.h
> +++ b/drivers/media/rc/rc-core-priv.h
> @@ -131,6 +131,11 @@ struct ir_raw_event_ctrl {
> unsigned int bits;
> bool stick_keyboard;
> } imon;
> + struct rcmm_dec {
> + int state;
> + unsigned count;
> + u64 bits;
> + } rcmm;
> };
>
> /* Mutex for locking raw IR processing and handler change */
> diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
> index 552bbe82a160..ad1dee921f5b 100644
> --- a/drivers/media/rc/rc-main.c
> +++ b/drivers/media/rc/rc-main.c
> @@ -70,6 +70,8 @@ static const struct {
> [RC_PROTO_CEC] = { .name = "cec", .repeat_period = 0 },
> [RC_PROTO_IMON] = { .name = "imon",
> .scancode_bits = 0x7fffffff, .repeat_period = 114 },
> + [RC_PROTO_RCMM] = { .name = "rcmm",
> + .scancode_bits = 0xffffffff, .repeat_period = 114 },
> };
>
> /* Used to keep track of known keymaps */
> @@ -1004,6 +1006,7 @@ static const struct {
> { RC_PROTO_BIT_XMP, "xmp", "ir-xmp-decoder" },
> { RC_PROTO_BIT_CEC, "cec", NULL },
> { RC_PROTO_BIT_IMON, "imon", "ir-imon-decoder" },
> + { RC_PROTO_BIT_RCMM, "rcmm", "ir-rcmm-decoder" },
> };
>
> /**
> diff --git a/include/media/rc-map.h b/include/media/rc-map.h
> index bfa3017cecba..f06200362a3c 100644
> --- a/include/media/rc-map.h
> +++ b/include/media/rc-map.h
> @@ -37,6 +37,7 @@
> #define RC_PROTO_BIT_XMP BIT_ULL(RC_PROTO_XMP)
> #define RC_PROTO_BIT_CEC BIT_ULL(RC_PROTO_CEC)
> #define RC_PROTO_BIT_IMON BIT_ULL(RC_PROTO_IMON)
> +#define RC_PROTO_BIT_RCMM BIT_ULL(RC_PROTO_RCMM)
>
> #define RC_PROTO_BIT_ALL \
> (RC_PROTO_BIT_UNKNOWN | RC_PROTO_BIT_OTHER | \
> @@ -51,7 +52,7 @@
> RC_PROTO_BIT_RC6_6A_24 | RC_PROTO_BIT_RC6_6A_32 | \
> RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_SHARP | \
> RC_PROTO_BIT_XMP | RC_PROTO_BIT_CEC | \
> - RC_PROTO_BIT_IMON)
> + RC_PROTO_BIT_IMON | RC_PROTO_BIT_RCMM)
> /* All rc protocols for which we have decoders */
> #define RC_PROTO_BIT_ALL_IR_DECODER \
> (RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 | \
> @@ -64,7 +65,8 @@
> RC_PROTO_BIT_RC6_0 | RC_PROTO_BIT_RC6_6A_20 | \
> RC_PROTO_BIT_RC6_6A_24 | RC_PROTO_BIT_RC6_6A_32 | \
> RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_SHARP | \
> - RC_PROTO_BIT_XMP | RC_PROTO_BIT_IMON)
> + RC_PROTO_BIT_XMP | RC_PROTO_BIT_IMON | \
> + RC_PROTO_BIT_RCMM)
>
> #define RC_PROTO_BIT_ALL_IR_ENCODER \
> (RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 | \
> diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h
> index 6b319581882f..2bc7915ff33a 100644
> --- a/include/uapi/linux/lirc.h
> +++ b/include/uapi/linux/lirc.h
> @@ -218,6 +218,7 @@ enum rc_proto {
> RC_PROTO_XMP = 21,
> RC_PROTO_CEC = 22,
> RC_PROTO_IMON = 23,
> + RC_PROTO_RCMM = 24,
> };
>
> #endif
> diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h
> index f189931042a7..c03e9562e349 100644
> --- a/tools/include/uapi/linux/lirc.h
> +++ b/tools/include/uapi/linux/lirc.h
> @@ -212,6 +212,7 @@ enum rc_proto {
> RC_PROTO_XMP = 21,
> RC_PROTO_CEC = 22,
> RC_PROTO_IMON = 23,
> + RC_PROTO_RCMM = 24,
> };
>
> #endif
> --
> 2.19.2
