The MIPI divider is also cleared as part of the clock setup sequence, so we
can remove that code.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
Tested-by: Adam Ford <aford173@xxxxxxxxx> #imx6dq
---
drivers/media/i2c/ov5640.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 7c18120aabd1..e36b04912dcc 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1404,16 +1404,6 @@ static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on)
if (on) {
/*
- * reset MIPI PCLK/SERCLK divider
- *
- * SC PLL CONTRL1 0
- * - [3..0]: MIPI PCLK/SERCLK divider
- */
- ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1, 0x0f, 0);
- if (ret)
- return ret;
-
- /*
* configure parallel port control lines polarity
*
* POLARITY CTRL0
--
git-series 0.9.1
