The OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT and OV5640_SCLK_ROOT_DIVIDER_DEFAULT
defines represent exactly the same setup, and are at the same value, than
the more consistent with the rest of the driver OV5640_SCLK2X_ROOT_DIV and
OV5640_SCLK_ROOT_DIV.
Remove them.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
Tested-by: Adam Ford <aford173@xxxxxxxxx> #imx6dq
---
drivers/media/i2c/ov5640.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 588b98e2e99f..7c18120aabd1 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -95,9 +95,6 @@
#define OV5640_REG_SDE_CTRL5 0x5585
#define OV5640_REG_AVG_READOUT 0x56a1
-#define OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT 1
-#define OV5640_SCLK_ROOT_DIVIDER_DEFAULT 2
-
enum ov5640_mode_id {
OV5640_MODE_QCIF_176_144 = 0,
OV5640_MODE_QVGA_320_240,
@@ -2086,8 +2083,8 @@ static int ov5640_restore_mode(struct ov5640_dev *sensor)
sensor->last_mode = &ov5640_mode_init_data;
ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
- (ilog2(OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT) << 2) |
- ilog2(OV5640_SCLK_ROOT_DIVIDER_DEFAULT));
+ (ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) |
+ ilog2(OV5640_SCLK_ROOT_DIV));
if (ret)
return ret;
--
git-series 0.9.1
