Hi Tomasz, On Thursday, 29 November 2018 21:51:32 EET Tomasz Figa wrote: > On Thu, Nov 29, 2018 at 6:43 AM Laurent Pinchart wrote: > > On Tuesday, 30 October 2018 00:22:54 EET Yong Zhi wrote: [snip] > >> 1. Link pad flag of video nodes (i.e. ipu3-imgu 0 output) need to be > >> enabled prior to the test. > >> 2. Stream tests are not performed since it requires pre-configuration > >> for each case. > > > > And that's a bit of an issue. I've tested the driver with a small script > > based on media-ctl to configure links and yavta to interface with the > > video nodes, and got the following oops: > > > > [ 136.927788] divide error: 0000 [#1] PREEMPT SMP PTI > > [ 136.927801] CPU: 2 PID: 2069 Comm: yavta Not tainted 4.20.0-rc1+ #9 > > [ 136.927806] Hardware name: HP Soraka/Soraka, BIOS 08/30/2018 > > [ 136.927820] RIP: 0010:ipu3_css_osys_calc+0xc54/0xe14 [ipu3_imgu] > > [ 136.927825] Code: 89 44 24 28 42 8b 44 86 6c f7 54 24 04 81 64 24 28 00 > > fd ff ff 81 64 24 04 00 03 00 00 8d 44 03 ff 81 44 24 28 80 03 00 00 99 > > <f7> fb 0f af c3 bb 20 00 00 00 99 f7 fb 8b 5c 24 40 83 fd 01 19 d2 > > [ 136.927830] RSP: 0018:ffff9af2c0b837c8 EFLAGS: 00010202 > > [ 136.927835] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: > > ffff9af2c3e353c0 > > [ 136.927839] RDX: 00000000ffffffff RSI: ffff9af2c0b838e0 RDI: > > ffff9af2c3e353c0 > > [ 136.927843] RBP: 0000000000000001 R08: 0000000000000000 R09: > > ffff9af2c0b83880 > > [ 136.927846] R10: ffff9af2c3e353c0 R11: ffff9af2c3e357c0 R12: > > 00000000000003a0 > > [ 136.927849] R13: 0000000000025a0a R14: 0000000000000000 R15: > > 0000000000000000 > > [ 136.927854] FS: 00007f1eca167700(0000) GS:ffff8c19fab00000(0000) > > knlGS: > > 0000000000000000 > > [ 136.927858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 136.927862] CR2: 00007f1ec776c000 CR3: 00000001312a4003 CR4: > > 00000000003606e0 > > [ 136.927865] Call Trace: > > [ 136.927884] ? __accumulate_pelt_segments+0x29/0x3a > > [ 136.927892] ? __switch_to_asm+0x40/0x70 > > [ 136.927899] ? alloc_vmap_area+0x78/0x2f6 > > [ 136.927903] ? __switch_to_asm+0x40/0x70 > > [ 136.927907] ? __switch_to_asm+0x34/0x70 > > [ 136.927911] ? __switch_to_asm+0x40/0x70 > > [ 136.927915] ? __switch_to_asm+0x34/0x70 > > [ 136.927923] ? __inc_numa_state+0x28/0x70 > > [ 136.927929] ? preempt_latency_start+0x1e/0x3d > > [ 136.927936] ? get_page_from_freelist+0x821/0xb62 > > [ 136.927943] ? slab_pre_alloc_hook+0x12/0x3b > > [ 136.927948] ? kmem_cache_alloc_node_trace+0xf6/0x108 > > [ 136.927954] ? alloc_vmap_area+0x78/0x2f6 > > Is it just me or the backtrace above doesn't seem to make sense? I > don't see any allocations inside ipu3_css_cfg_acc(). I suppose that's why it's prefixed with '?' :-) > > [ 136.927965] ipu3_css_cfg_acc+0xa0/0x1b5f [ipu3_imgu] > > [ 136.927981] ipu3_css_set_parameters+0x286/0x6e7 [ipu3_imgu] > > [ 136.927995] ipu3_css_start_streaming+0x1230/0x130a [ipu3_imgu] > > [ 136.928010] imgu_s_stream+0x104/0x2f7 [ipu3_imgu] > > [ 136.928022] ipu3_vb2_start_streaming+0x168/0x1bd [ipu3_imgu] > > [ 136.928034] vb2_start_streaming+0x6c/0xf2 [videobuf2_common] > > [ 136.928044] vb2_core_streamon+0xcf/0x109 [videobuf2_common] > > [ 136.928061] __video_do_ioctl+0x239/0x388 [videodev] > > [ 136.928081] video_usercopy+0x25d/0x47a [videodev] > > [ 136.928097] ? copy_overflow+0x14/0x14 [videodev] > > [ 136.928115] v4l2_ioctl+0x4d/0x58 [videodev] > > [ 136.928123] vfs_ioctl+0x1b/0x28 > > [ 136.928130] do_vfs_ioctl+0x4de/0x566 > > [ 136.928139] ksys_ioctl+0x50/0x70 > > [ 136.928146] __x64_sys_ioctl+0x16/0x19 > > [ 136.928152] do_syscall_64+0x4d/0x5a > > [ 136.928158] entry_SYSCALL_64_after_hwframe+0x44/0xa9 > > [ 136.928164] RIP: 0033:0x7f1ec9a84f47 > > [ 136.928169] Code: 00 00 00 48 8b 05 51 6f 2c 00 64 c7 00 26 00 00 00 48 > > c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 > > <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48 > > [ 136.928173] RSP: 002b:00007ffe279e6188 EFLAGS: 00000246 ORIG_RAX: > > 0000000000000010 > > [ 136.928178] RAX: ffffffffffffffda RBX: 0000000000000007 RCX: > > 00007f1ec9a84f47 > > [ 136.928181] RDX: 00007ffe279e6194 RSI: 0000000040045612 RDI: > > 0000000000000003 > > [ 136.928184] RBP: 0000000000000000 R08: 00007f1ec776d000 R09: > > 0000000000000000 > > [ 136.928188] R10: 0000000000000020 R11: 0000000000000246 R12: > > 00007ffe279e6360 > > [ 136.928191] R13: 0000000000000004 R14: 00007ffe279e6360 R15: > > 00007ffe279e8826 > > [ 136.928198] Modules linked in: ccm zram arc4 iwlmvm mac80211 intel_rapl > > x86_pkg_temp_thermal intel_powerclamp coretemp iwlwifi cfg80211 > > hid_multitouch ipu3_imgu ipu3_cio2 8250_dw videobuf2_dma_sg > > videobuf2_memops videobuf2_v4l2 processor_thermal_device > > intel_soc_dts_iosf videobuf2_common ov5670 ov13858 dw9714 v4l2_fwnode > > v4l2_common videodev media at24 cros_ec_lpcs cros_ec_core int3403_thermal > > int340x_thermal_zone int3400_thermal acpi_thermal_rel chromeos_pstore > > mac_hid autofs4 usbhid mmc_block hid_generic i915 sdhci_pci video cqhci > > i2c_algo_bit sdhci drm_kms_helper syscopyarea sysfillrect sysimgblt > > fb_sys_fops drm drm_panel_orientation_quirks i2c_hid hid [ 136.928273] > > ---[ end trace 4ec6c2ce09e06d9d ]--- > > [ 136.928288] RIP: 0010:ipu3_css_osys_calc+0xc54/0xe14 [ipu3_imgu] > > [ 136.928293] Code: 89 44 24 28 42 8b 44 86 6c f7 54 24 04 81 64 24 28 00 > > fd ff ff 81 64 24 04 00 03 00 00 8d 44 03 ff 81 44 24 28 80 03 00 00 99 > > <f7> fb 0f af c3 bb 20 00 00 00 99 f7 fb 8b 5c 24 40 83 fd 01 19 d2 > > [ 136.928297] RSP: 0018:ffff9af2c0b837c8 EFLAGS: 00010202 > > [ 136.928302] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: > > ffff9af2c3e353c0 > > [ 136.928307] RDX: 00000000ffffffff RSI: ffff9af2c0b838e0 RDI: > > ffff9af2c3e353c0 > > [ 136.928311] RBP: 0000000000000001 R08: 0000000000000000 R09: > > ffff9af2c0b83880 > > [ 136.928320] R10: ffff9af2c3e353c0 R11: ffff9af2c3e357c0 R12: > > 00000000000003a0 > > [ 136.928324] R13: 0000000000025a0a R14: 0000000000000000 R15: > > 0000000000000000 > > [ 136.928330] FS: 00007f1eca167700(0000) GS:ffff8c19fab00000(0000) > > knlGS: > > 0000000000000000 > > [ 136.928349] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 136.928364] CR2: 00007f1ec776c000 CR3: 00000001312a4003 CR4: > > 00000000003606e0 > > > > The script can be found at > > https://lists.libcamera.org/pipermail/libcamera-devel/2018-November/00004 > > 0.html. > > > > I may be doing something wrong (and I probably am), but in any case, the > > driver shouldn't crash. Could you please have a look ? > > It looks like the driver doesn't have the default state initialized > correctly somewhere and it ends up using 0 as the divisor in some > calculation? Something to fix indeed. That's probably the case. I'll trust Intel to fix that in v8 :-) -- Regards, Laurent Pinchart
