Re: [PATCH v3 6/6] media: mt9m111: allow to setup pixclk polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 27, 2018 at 03:12:29PM +0100, Philipp Zabel wrote:
> Hi Sakari,
> 
> On Tue, 2018-11-27 at 15:50 +0200, Sakari Ailus wrote:
> > Hi Philipp,
> > 
> > On Tue, Nov 27, 2018 at 02:39:27PM +0100, Philipp Zabel wrote:
> > > Hi Sakari,
> > > 
> > > On Tue, 2018-11-27 at 15:19 +0200, Sakari Ailus wrote:
> > > > Hi Marco,
> > > > 
> > > > On Tue, Nov 27, 2018 at 11:02:53AM +0100, Marco Felsch wrote:
> > > > > From: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
> > > > > 
> > > > > The chip can be configured to output data transitions on the
> > > > > rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
> > > > > falling edge.
> > > > > 
> > > > > Parsing the fw-node is made in a subfunction to bundle all (future)
> > > > > dt-parsing / fw-parsing stuff.
> > > > > 
> > > > > Signed-off-by: Enrico Scholz <enrico.scholz@xxxxxxxxxxxxxxxxx>
> > > > > (m.grzeschik@xxxxxxxxxxxxxx: Fix inverting clock. INV_PIX_CLOCK bit is set
> > > > > per default. Set bit to 0 (enable mask bit without value) to enable
> > > > > falling edge sampling.)
> > > > > Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
> > > > > (m.felsch@xxxxxxxxxxxxxx: use fwnode helpers)
> > > > > (m.felsch@xxxxxxxxxxxxxx: mv fw parsing into own function)
> > > > > (m.felsch@xxxxxxxxxxxxxx: adapt commit msg)
> > > > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> > > > 
> > > > Applied with the following diff:
> > > > 
> > > > diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> > > > index 2ef332b9b914..b6011bfddde8 100644
> > > > --- a/drivers/media/i2c/mt9m111.c
> > > > +++ b/drivers/media/i2c/mt9m111.c
> > > > @@ -1172,24 +1172,24 @@ static int mt9m111_video_probe(struct i2c_client *client)
> > > >  
> > > >  static int mt9m111_probe_fw(struct i2c_client *client, struct mt9m111 *mt9m111)
> > > >  {
> > > > -	struct v4l2_fwnode_endpoint *bus_cfg;
> > > > +	struct v4l2_fwnode_endpoint bus_cfg = {
> > > > +		.bus_type = V4L2_MBUS_PARALLEL
> > > > +	};
> > > >  	struct fwnode_handle *np;
> > > > -	int ret = 0;
> > > > +	int ret;
> > > >  
> > > >  	np = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
> > > >  	if (!np)
> > > >  		return -EINVAL;
> > > >  
> > > > -	bus_cfg = v4l2_fwnode_endpoint_alloc_parse(np);
> > > > -	if (IS_ERR(bus_cfg)) {
> > > > -		ret = PTR_ERR(bus_cfg);
> > > > +	ret = v4l2_fwnode_endpoint_alloc_parse(np, &bus_cfg);
> > > 
> > > Should that be
> > > 
> > > +	ret = v4l2_fwnode_endpoint_parse(np, &bus_cfg);
> > > 
> > > intead?
> > 
> > Could be. I'd expect the driver to need the link frequency at some point
> > after which you'd need the variable size properties anyway. But that's not
> > the case now.
> 
> I don't think the link-frequencies property will be used, this is just a
> parallel device. But Marco chose to use _alloc_parse because of what the
> v4l2_fwnode_endpoint_parse() documentation says:
> 
> /*
>  * NOTE: This function does not parse properties the size of which is variable
>  * without a low fixed limit. Please use v4l2_fwnode_endpoint_alloc_parse() in                                                                
>  * new drivers instead.
>  */
> 
> So maybe we want to use v4l2_fwnode_endpoint_alloc_parse() always. There
> is no unnecessary allocation, just a lookup of the non-existing link-
> frequencies property.

There could be other properties in the future.

When I wrote that, I guess I ignored that the link frequency might not be
relevant for some devices such as CSI-2 receivers. I think it'd make sense
to remove the latter sentence; I can send a patch. The first sentence that
tells the limitations of the function is enough IMO.

-- 
Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux