Hi, Thanks for working on improving the Nova T 500 performance, it is much appreciated, and let me know if you need further help with debugging it. I tried your dib0700-ir tree. My problems with the Nova T 500 and the 1.20 firmware have been warm reboots. Before your patch a warm reboot would give I2C errors in dmesg log with the 1.20 FW, hence I have only used my machine with cold boots since my upgrade this xmas. With the 1.10 FW and Ubuntu 7.04 + v4l tip sometime in 2008 the system have run without much problems including frequent warm reboots for 2 years. Sorry to say this patch does not solve the problem to have a working IR after a warm reboot see dmesg logs below. I have not seen any problems with high load before, so can't give any info on that matter more than it is certainly low now. The I2C errors I saw before your patch come shortly after a warm reboot (see last dmesg log included), but have not had any problems after cold boots for the past week the system have been recording. I run on: Linux hgu 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 i686 GNU/Linux Motherboard: ABIT IL-90MV 945GT Mobile S478 HDMI mATX CPU: Intel Core 2 Duo Mobile T5600 1.83GHz 2M DVB-T cards: Hauppauge WinTV Nova-T 500 DVB-T & Twinhan VisionPlus DVB-T In a bad reception area (the Twinhan can't acceptably receive all the channels the Hauppauge can) /Harald dmesg logs: Warm reboot (after ubuntu 9.10 2.6.31-16 standard modules) got non-working remote but working video [ 8.282314] dib0700: loaded with support for 14 different device-types [ 8.282568] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 8.282615] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 8.282798] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 8.311479] DVB: registering new adapter (bttv0) [ 8.396083] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)... [ 8.509562] usbcore: registered new interface driver snd-usb-audio [ 8.578470] MT2060: successfully identified (IF1 = 1228) [ 9.107028] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 9.107285] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 9.113153] DVB: registering adapter 2 frontend 0 (DiBcom 3000MC/P)... [ 9.119744] MT2060: successfully identified (IF1 = 1235) [ 9.490288] dst(0) dst_get_device_id: Recognise [DTTDIG] [ 9.490294] DST type flags : 0x10 firmware version = 2 [ 9.531093] dst(0) dst_get_mac: MAC Address=[00:08:ca:30:10:39] [ 9.531103] DVB: registering adapter 1 frontend 0 (DST DVB-T)... [ 9.684982] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:03:06.2/usb2/2-1/input/input6 [ 9.685059] dvb-usb: schedule remote query interval to 50 msecs. [ 9.685066] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. [ 9.685327] dib0700: rc submit urb failed Cold boot (directly after the previous) got working remote and video [ 19.445048] dib0700: loaded with support for 14 different device-types [ 19.445747] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 19.445754] usb 2-1: firmware: requesting dvb-usb-dib0700-1.20.fw [ 19.498041] usbcore: registered new interface driver snd-usb-audio [ 19.508086] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.508115] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.547850] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 19.586410] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 19.586598] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 19.699301] dst(0) dst_get_device_id: Recognise [DTTDIG] [ 19.699310] DST type flags : 0x10 firmware version = 2 [ 19.741032] dst(0) dst_get_mac: MAC Address=[00:08:ca:30:10:39] [ 19.741042] DVB: registering adapter 0 frontend 0 (DST DVB-T)... [ 19.848324] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X [ 19.904203] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X [ 19.904842] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.917288] dib0700: firmware started successfully. [ 19.945541] kjournald starting. Commit interval 5 seconds [ 19.946387] EXT3 FS on sda1, internal journal [ 19.946397] EXT3-fs: mounted filesystem with writeback data mode. [ 20.019719] __ratelimit: 9 callbacks suppressed [ 20.019723] type=1505 audit(1262768018.239:14): operation="profile_replace" pid=1011 name=/usr/share/gdm/guest-session/Xsession [ 20.021747] type=1505 audit(1262768018.243:15): operation="profile_replace" pid=1013 name=/sbin/dhclient3 [ 20.022550] type=1505 audit(1262768018.243:16): operation="profile_replace" pid=1013 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 20.022984] type=1505 audit(1262768018.243:17): operation="profile_replace" pid=1013 name=/usr/lib/connman/scripts/dhclient-script [ 20.027665] type=1505 audit(1262768018.247:18): operation="profile_replace" pid=1014 name=/usr/bin/evince [ 20.041149] type=1505 audit(1262768018.263:19): operation="profile_replace" pid=1014 name=/usr/bin/evince-previewer [ 20.048838] type=1505 audit(1262768018.267:20): operation="profile_replace" pid=1014 name=/usr/bin/evince-thumbnailer [ 20.059755] type=1505 audit(1262768018.279:21): operation="profile_replace" pid=1016 name=/usr/lib/cups/backend/cups-pdf [ 20.060688] type=1505 audit(1262768018.279:22): operation="profile_replace" pid=1016 name=/usr/sbin/cupsd [ 20.063410] type=1505 audit(1262768018.283:23): operation="profile_replace" pid=1017 name=/usr/sbin/mysqld [ 20.440617] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 20.440683] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 20.452096] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 20.602207] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... Warm reboot directly after that, got non-working remote and working video [ 19.394923] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 19.394984] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 19.395236] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 19.422433] usbcore: registered new interface driver snd-usb-audio [ 19.464044] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.464071] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.556561] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... [ 19.567024] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 19.567227] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 19.586441] MT2060: successfully identified (IF1 = 1228) [ 19.656326] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X [ 19.679165] dst(0) dst_get_device_id: Recognise [DTTDIG] [ 19.679174] DST type flags : 0x10 firmware version = 2 [ 19.713222] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X [ 19.713865] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.717511] dst(0) dst_get_mac: MAC Address=[00:08:ca:30:10:39] [ 19.717520] DVB: registering adapter 0 frontend 0 (DST DVB-T)... [ 19.760820] __ratelimit: 9 callbacks suppressed [ 19.760824] type=1505 audit(1262768411.986:14): operation="profile_replace" pid=958 name=/usr/share/gdm/guest-session/Xsession [ 19.762718] type=1505 audit(1262768411.986:15): operation="profile_replace" pid=959 name=/sbin/dhclient3 [ 19.763518] type=1505 audit(1262768411.986:16): operation="profile_replace" pid=959 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 19.763951] type=1505 audit(1262768411.986:17): operation="profile_replace" pid=959 name=/usr/lib/connman/scripts/dhclient-script [ 19.768153] type=1505 audit(1262768411.994:18): operation="profile_replace" pid=960 name=/usr/bin/evince [ 19.781632] type=1505 audit(1262768412.006:19): operation="profile_replace" pid=960 name=/usr/bin/evince-previewer [ 19.789269] type=1505 audit(1262768412.014:20): operation="profile_replace" pid=960 name=/usr/bin/evince-thumbnailer [ 19.799644] type=1505 audit(1262768412.022:21): operation="profile_replace" pid=962 name=/usr/lib/cups/backend/cups-pdf [ 19.800576] type=1505 audit(1262768412.026:22): operation="profile_replace" pid=962 name=/usr/sbin/cupsd [ 19.803911] type=1505 audit(1262768412.026:23): operation="profile_replace" pid=963 name=/usr/sbin/mysqld [ 19.806818] kjournald starting. Commit interval 5 seconds [ 19.892403] EXT3 FS on sda1, internal journal [ 19.892411] EXT3-fs: mounted filesystem with writeback data mode. [ 20.161701] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 20.161952] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 20.170025] DVB: registering adapter 2 frontend 0 (DiBcom 3000MC/P)... [ 20.181216] MT2060: successfully identified (IF1 = 1235) warm reboot again, non-working remote and working video [ 19.502575] dib0700: loaded with support for 14 different device-types [ 19.517756] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 19.517812] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 19.518129] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 19.540713] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.540742] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.543961] usbcore: registered new interface driver snd-usb-audio [ 19.616968] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 19.617152] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 19.654026] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... [ 19.666149] MT2060: successfully identified (IF1 = 1228) [ 19.752337] dst(0) dst_get_device_id: Recognise [DTTDIG] [ 19.752346] DST type flags : 0x10 firmware version = 2 [ 19.789529] dst(0) dst_get_mac: MAC Address=[00:08:ca:30:10:39] [ 19.789537] DVB: registering adapter 0 frontend 0 (DST DVB-T)... [ 19.954831] kjournald starting. Commit interval 5 seconds [ 20.002500] __ratelimit: 9 callbacks suppressed [ 20.002504] type=1505 audit(1262768918.222:14): operation="profile_replace" pid=982 name=/usr/share/gdm/guest-session/Xsession [ 20.004491] type=1505 audit(1262768918.226:15): operation="profile_replace" pid=983 name=/sbin/dhclient3 [ 20.005305] type=1505 audit(1262768918.226:16): operation="profile_replace" pid=983 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 20.005737] type=1505 audit(1262768918.226:17): operation="profile_replace" pid=983 name=/usr/lib/connman/scripts/dhclient-script [ 20.011263] type=1505 audit(1262768918.230:18): operation="profile_replace" pid=984 name=/usr/bin/evince [ 20.024517] type=1505 audit(1262768918.246:19): operation="profile_replace" pid=984 name=/usr/bin/evince-previewer [ 20.032170] type=1505 audit(1262768918.254:20): operation="profile_replace" pid=984 name=/usr/bin/evince-thumbnailer [ 20.042387] EXT3 FS on sda1, internal journal [ 20.042395] EXT3-fs: mounted filesystem with writeback data mode. [ 20.043270] type=1505 audit(1262768918.262:21): operation="profile_replace" pid=986 name=/usr/lib/cups/backend/cups-pdf [ 20.044203] type=1505 audit(1262768918.266:22): operation="profile_replace" pid=986 name=/usr/sbin/cupsd [ 20.079244] type=1505 audit(1262768918.298:23): operation="profile_replace" pid=991 name=/usr/sbin/mysqld [ 20.096557] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X [ 20.152244] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X [ 20.152908] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.305277] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 20.305516] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 20.313085] DVB: registering adapter 2 frontend 0 (DiBcom 3000MC/P)... [ 20.325334] MT2060: successfully identified (IF1 = 1235) Cold boot (with a hung cold boot inbetween, don't know why) [ 19.462415] dib0700: loaded with support for 14 different device-types [ 19.468290] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware [ 19.468298] usb 2-1: firmware: requesting dvb-usb-dib0700-1.20.fw [ 19.515126] EXT4-fs (sda4): internal journal on sda4:8 [ 19.540349] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.540375] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.612616] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 19.612797] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 19.618532] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 19.750192] dst(0) dst_get_device_id: Recognise [DTTDIG] [ 19.750202] DST type flags : 0x10 firmware version = 2 [ 19.793633] dst(0) dst_get_mac: MAC Address=[00:08:ca:30:10:39] [ 19.793644] DVB: registering adapter 0 frontend 0 (DST DVB-T)... [ 19.837101] kjournald starting. Commit interval 5 seconds [ 19.838306] EXT3 FS on sda1, internal journal [ 19.838313] EXT3-fs: mounted filesystem with writeback data mode. [ 19.958594] dib0700: firmware started successfully. [ 20.016232] __ratelimit: 9 callbacks suppressed [ 20.016236] type=1505 audit(1262769337.239:14): operation="profile_replace" pid=944 name=/usr/share/gdm/guest-session/Xsession [ 20.019156] type=1505 audit(1262769337.243:15): operation="profile_replace" pid=945 name=/sbin/dhclient3 [ 20.019959] type=1505 audit(1262769337.243:16): operation="profile_replace" pid=945 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 20.020424] type=1505 audit(1262769337.243:17): operation="profile_replace" pid=945 name=/usr/lib/connman/scripts/dhclient-script [ 20.026265] type=1505 audit(1262769337.251:18): operation="profile_replace" pid=946 name=/usr/bin/evince [ 20.040464] type=1505 audit(1262769337.263:19): operation="profile_replace" pid=946 name=/usr/bin/evince-previewer [ 20.050251] type=1505 audit(1262769337.275:20): operation="profile_replace" pid=946 name=/usr/bin/evince-thumbnailer [ 20.060962] type=1505 audit(1262769337.283:21): operation="profile_replace" pid=948 name=/usr/lib/cups/backend/cups-pdf [ 20.061314] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X [ 20.061905] type=1505 audit(1262769337.287:22): operation="profile_replace" pid=948 name=/usr/sbin/cupsd [ 20.064984] type=1505 audit(1262769337.287:23): operation="profile_replace" pid=949 name=/usr/sbin/mysqld [ 20.117133] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X [ 20.117770] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.465812] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. [ 20.465876] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 20.465962] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) [ 20.588205] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... [ 20.601581] MT2060: successfully identified (IF1 = 1228) Old dmesg without your patch and a warm reboot: Jan 4 08:31:41 hgu kernel: [ 8.102915] dib0700: loaded with support for 9 different device-types Jan 4 08:31:41 hgu kernel: [ 8.105999] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state. Jan 4 08:31:41 hgu kernel: [ 8.106041] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jan 4 08:31:41 hgu kernel: [ 8.106283] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) Jan 4 08:31:41 hgu kernel: [ 8.217085] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)... Jan 4 08:31:41 hgu kernel: [ 8.321048] ip_tables: (C) 2000-2006 Netfilter Core Team Jan 4 08:31:41 hgu kernel: [ 8.453271] MT2060: successfully identified (IF1 = 1228) Jan 4 08:31:41 hgu kernel: [ 8.553167] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jan 4 08:31:41 hgu kernel: [ 8.553197] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jan 4 08:31:42 hgu kernel: [ 8.807282] dst(0) dst_get_device_id: Recognise [DTTDIG] Jan 4 08:31:42 hgu kernel: [ 8.807287] DST type flags : 0x10 firmware version = 2 Jan 4 08:31:42 hgu kernel: [ 8.809934] usbcore: registered new interface driver snd-usb-audio Jan 4 08:31:42 hgu kernel: [ 8.849652] dst(0) dst_get_mac: MAC Address=[00:08:ca:30:10:39] Jan 4 08:31:42 hgu kernel: [ 8.849664] DVB: registering adapter 0 frontend 2019307570 (DST DVB-T)... Jan 4 08:31:42 hgu kernel: [ 8.865488] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... Jan 4 08:31:42 hgu kernel: [ 8.865759] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 Jan 4 08:31:42 hgu kernel: [ 8.967457] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Jan 4 08:31:42 hgu kernel: [ 8.967969] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T) Jan 4 08:31:42 hgu kernel: [ 8.976285] DVB: registering adapter 2 frontend 0 (DiBcom 3000MC/P)... Jan 4 08:31:42 hgu kernel: [ 8.981037] MT2060: successfully identified (IF1 = 1235) Jan 4 08:31:42 hgu kernel: [ 9.528968] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:03:06.2/usb2/2-1/input/input6 Jan 4 08:31:42 hgu kernel: [ 9.529054] dvb-usb: schedule remote query interval to 50 msecs. Jan 4 08:31:42 hgu kernel: [ 9.529060] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected. Jan 4 08:31:42 hgu kernel: [ 9.529334] usbcore: registered new interface driver dvb_usb_dib0700 Jan 4 08:31:44 hgu kernel: [ 11.057874] __ratelimit: 9 callbacks suppressed ... Jan 4 08:42:49 hgu kernel: [ 659.660025] mt2060 I2C write failed Jan 4 08:42:50 hgu kernel: [ 660.368029] mt2060 I2C write failed Jan 4 08:49:54 hgu kernel: [ 1084.482548] mt2060 I2C write failed Jan 4 08:49:54 hgu kernel: [ 1084.489152] mt2060 I2C write failed (len=2) Jan 4 08:49:54 hgu kernel: [ 1084.489161] mt2060 I2C write failed (len=6) Jan 4 08:49:54 hgu kernel: [ 1084.489168] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.497021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.505019] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.513021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.521020] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.529023] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.537021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.545021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.553023] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.561020] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.719318] mt2060 I2C write failed (len=2) Jan 4 08:49:54 hgu kernel: [ 1084.719327] mt2060 I2C write failed (len=6) Jan 4 08:49:54 hgu kernel: [ 1084.719334] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.725020] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.733022] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.741020] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.748667] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.756021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.764021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.773018] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.781021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.789021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.957611] mt2060 I2C write failed Jan 4 08:49:54 hgu kernel: [ 1084.964173] mt2060 I2C write failed (len=2) Jan 4 08:49:54 hgu kernel: [ 1084.964182] mt2060 I2C write failed (len=6) Jan 4 08:49:54 hgu kernel: [ 1084.964189] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.972021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.980019] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.988029] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1084.996019] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.004023] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.012018] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.020021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.028018] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.036018] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.194306] mt2060 I2C write failed (len=2) Jan 4 08:49:54 hgu kernel: [ 1085.194316] mt2060 I2C write failed (len=6) Jan 4 08:49:54 hgu kernel: [ 1085.194323] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.200020] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.208021] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.216019] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.224019] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.232019] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.240019] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.248054] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.256020] mt2060 I2C read failed Jan 4 08:49:54 hgu kernel: [ 1085.264020] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.429923] mt2060 I2C write failed (len=2) Jan 4 08:49:55 hgu kernel: [ 1085.429933] mt2060 I2C write failed (len=6) Jan 4 08:49:55 hgu kernel: [ 1085.429940] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.436023] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.444023] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.452044] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.460023] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.468020] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.476019] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.484020] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.492019] mt2060 I2C read failed Jan 4 08:49:55 hgu kernel: [ 1085.500020] mt2060 I2C read failed -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
