On Wed, Nov 14, 2018 at 8:29 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
>
> From: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>
>
> The H3 and H5 features the same CSI controller that was initially found on
> the A31.
>
> Add a DT node for it.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> index 4b1530ebe427..8779ee750bd8 100644
> --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> @@ -393,6 +393,13 @@
> interrupt-controller;
> #interrupt-cells = <3>;
>
> + csi_pins: csi {
> + pins = "PE0", "PE1", "PE2", "PE3", "PE4",
> + "PE5", "PE6", "PE7", "PE8", "PE9",
> + "PE10", "PE11";
> + function = "csi";
> + };
> +
> emac_rgmii_pins: emac0 {
> pins = "PD0", "PD1", "PD2", "PD3", "PD4",
> "PD5", "PD7", "PD8", "PD9", "PD10",
> @@ -744,6 +751,21 @@
> interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> };
>
> + csi: camera@1cb0000 {
> + compatible = "allwinner,sun8i-h3-csi",
> + "allwinner,sun6i-a31-csi";
> + reg = <0x01cb0000 0x1000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_CSI>,
> + <&ccu CLK_CSI_SCLK>,
> + <&ccu CLK_DRAM_CSI>;
> + clock-names = "bus", "mod", "ram";
Don't we need CLK_CSI_MCLK which can be pinout via PE1?
