Hi there
I'm the owner of two Terratec Cinergy C PCI HD cards.
I'm running on vanilla kernel 2.6.32.0 x64 and is using the s2-liblianin driver.
My problem is that the driver only see 1 of my 2 cards.
When I investigate the cards, I see that they have a different
subsystem identifiers : 153b:1178 which works, and 153b.01788 which
doesn't work. There are no visible difference between the card, as far
as I can see.
How do I get the driver to "attach" to both the cards so I can get
both "adapter0" and "adapter1" - today it is only "adapter0" ?
Please help !!!
/Ole W
lspci -vnn output :
06:00.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd
Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
Subsystem: TERRATEC Electronic GmbH Device [153b:0178]
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at edfff000 (32-bit, prefetchable) [size=4K]
Kernel modules: mantis
06:01.0 Multimedia controller [0480]: Twinhan Technology Co. Ltd
Mantis DTV PCI Bridge Controller [Ver 1.0] [1822:4e35] (rev 01)
Subsystem: TERRATEC Electronic GmbH Device [153b:1178]
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at fdffe000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: Mantis
Kernel modules: mantis
dmesg output :
Mantis 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mantis 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
irq: 17, latency: 64
memory: 0xfdffe000, mmio: 0xffffc9001178e000
found a VP-2040 PCI DVB-C device on (06:01.0),
Mantis Rev 1 [153b:1178], irq: 17, latency: 64
memory: 0xfdffe000, mmio: 0xffffc9001178e000
MAC Address=[00:08:ca:1e:88:83]
mantis_alloc_buffers (1): DMA=0x37c60000 cpu=0xffff880037c60000 size=65536
mantis_alloc_buffers (1): RISC=0x37c06000 cpu=0xffff880037c06000 size=1000
DVB: registering new adapter (Mantis dvb adapter)
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
mantis_frontend_init (1): Probing for CU1216 (DVB-C)
TDA10023: i2c-addr = 0x0c, id = 0x7d
mantis_frontend_init (1): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c
mantis_frontend_init (1): Mantis DVB-C Philips CU1216 frontend attach success
DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
mantis_ca_init (1): Registering EN50221 device
mantis_ca_init (1): Registered EN50221 device
mantis_hif_init (1): Adapter(1) Initializing Mantis Host Interface
input: Mantis VP-2040 IR Receiver as /devices/virtual/input/input5
Mantis VP-2040 IR Receiver: unknown key for scancode 0x0000
Mantis VP-2040 IR Receiver: unknown key: key=0x00 down=1
Mantis VP-2040 IR Receiver: unknown key: key=0x00 down=0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
