In data lunedì 19 novembre 2018 20:47:19 CET, Takashi Iwai ha scritto: > On Mon, 19 Nov 2018 18:53:26 +0100, > > Mauro Carvalho Chehab wrote: > > Could you ask the user to apply the enclosed patch and provide us > > the results of those prints? > > OK, I built a test kernel in OBS home:tiwai:bsc1116374 repo. Now it's > available at > > https://download.opensuse.org/repositories/home:/tiwai:/bsc1116374/standard > / > > Stakanov, could you test it and give the kernel messages? > > > Thanks! > > Takashi Here we go, I did saw your mail only late, sorry. Result of proposed fix (rc3): card has still no function, does not sync, EPG works. No sound no picture. entropy@silversurfer:~> uname -a Linux silversurfer 4.20.0-rc3-1.g7e16618-default #1 SMP PREEMPT Mon Nov 19 18:54:15 UTC 2018 (7e16618) x86_64 x86_64 x86_64 GNU/Linux output of entropy@silversurfer:~> sudo dmesg | grep -i b2c2 [ 4.831163] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 4.862648] b2c2-flexcop: MAC address = xx:xx:xx:xx:xx:xx [ 5.094173] b2c2-flexcop: found 'ST STV0299 DVB-S' . [ 5.094177] b2c2_flexcop_pci 0000:06:06.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 5.094248] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 121.789236] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0 frequency 1880000 out of range (950000..2150) [ 128.817325] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0 frequency 1944750 out of range (950000..2150) sudo lspci -vvv 06:06.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02) Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 20 NUMA node: 0 Region 0: Memory at fe500000 (32-bit, non-prefetchable) [size=64K] Region 1: I/O ports at b040 [size=32] Kernel driver in use: b2c2_flexcop_pci Kernel modules: b2c2_flexcop_pci _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postfächer sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de
