Hi On 19/11/2018 17:53, Mauro Carvalho Chehab wrote: > Hi Takashi, > > Em Mon, 19 Nov 2018 16:13:29 +0100 > Takashi Iwai <tiwai@xxxxxxx> escreveu: > >> Hi, >> >> we've got a regression report on openSUSE Bugzilla regarding DVB-S PCI >> card: >> https://bugzilla.opensuse.org/show_bug.cgi?id=1116374 >> >> According to the reporter (Stakanov, Cc'ed), the card worked fine on >> 4.18.15, but since 4.19, it doesn't give any channels, sound nor >> picture, but only EPG is received. > > Receiving just EPG is weird. > >> >> The following errors might be relevant: >> >> ================ >> [ 4.845180] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully >> [ 4.869703] b2c2-flexcop: MAC address = xx:xx:xx:xx:xx:xx >> [ 5.100318] b2c2-flexcop: found 'ST STV0299 DVB-S' . >> [ 5.100323] b2c2_flexcop_pci 0000:06:06.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... >> [ 5.100370] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete > > >> [ 117.513086] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0 frequency 1549000 out of range (950000..2150) >> [ 124.905222] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0 frequency 1880000 out of range (950000..2150) >> [ 127.337079] b2c2_flexcop_pci 0000:06:06.0: DVB: adapter 0 frontend 0 frequency 1353500 out of range (950000..2150) > > That indicates that it is trying to tune to an unsupported frequency. For > DVB-S, all frequencies above should be in kHz. Kaffeine reports the wrong LNB frequency ranges for universal Europe... I just use Astra 1E settings instead which I am pretty sure is the same? I am using the stv0299 / dvb_pll(opera1) combi and not reporting any problems other than the streaming issue with dvb-usb-v2 which I don't think this uses? Regards Malcolm
