The H3 has a slightly different CSI controller (no BT656, no CCI) which looks a lot like the original A31 controller. Add a compatible for the A31, and more specific compatible the for the H3 to be used in combination for the A31. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> --- Documentation/devicetree/bindings/media/sun6i-csi.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt index 2ff47a9507a6..3f8eb0296382 100644 --- a/Documentation/devicetree/bindings/media/sun6i-csi.txt +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt @@ -5,7 +5,10 @@ Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2 interface and CSI1 is used for parallel interface. Required properties: - - compatible: value must be "allwinner,sun8i-v3s-csi" + - compatible: value must be one of: + * "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-v3s-csi" - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the CSI -- 2.19.1
