[PATCH 06/11] [media] marvell-ccic: drop ctlr_reset()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This accesses the clock registers directly and thus is not too
devicetree friendly. If it's actually needed it needs to be done
differently.

Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
 .../media/platform/marvell-ccic/mcam-core.c   |  6 -----
 .../media/platform/marvell-ccic/mcam-core.h   |  1 -
 .../media/platform/marvell-ccic/mmp-driver.c  | 23 -------------------
 3 files changed, 30 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index d24e5b7a3bc5..1b879035948c 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -1154,12 +1154,6 @@ static void mcam_vb_stop_streaming(struct vb2_queue *vq)
 	if (cam->state != S_STREAMING)
 		return;
 	mcam_ctlr_stop_dma(cam);
-	/*
-	 * Reset the CCIC PHY after stopping streaming,
-	 * otherwise, the CCIC may be unstable.
-	 */
-	if (cam->ctlr_reset)
-		cam->ctlr_reset(cam);
 	/*
 	 * VB2 reclaims the buffers, so we need to forget
 	 * about them.
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h
index ad8955f9f0a1..f93f23faf364 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.h
+++ b/drivers/media/platform/marvell-ccic/mcam-core.h
@@ -137,7 +137,6 @@ struct mcam_camera {
 	int (*plat_power_up) (struct mcam_camera *cam);
 	void (*plat_power_down) (struct mcam_camera *cam);
 	void (*calc_dphy) (struct mcam_camera *cam);
-	void (*ctlr_reset) (struct mcam_camera *cam);
 
 	/*
 	 * Everything below here is private to the mcam core and
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 70a2833db0d1..92a79ad8a12c 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -183,28 +183,6 @@ static void mmpcam_power_down(struct mcam_camera *mcam)
 	mcam_clk_disable(mcam);
 }
 
-static void mcam_ctlr_reset(struct mcam_camera *mcam)
-{
-	unsigned long val;
-	struct mmp_camera *cam = mcam_to_cam(mcam);
-
-	if (mcam->ccic_id) {
-		/*
-		 * Using CCIC2
-		 */
-		val = ioread32(cam->power_regs + REG_CCIC2_CRCR);
-		iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR);
-		iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR);
-	} else {
-		/*
-		 * Using CCIC1
-		 */
-		val = ioread32(cam->power_regs + REG_CCIC_CRCR);
-		iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR);
-		iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR);
-	}
-}
-
 /*
  * calc the dphy register values
  * There are three dphy registers being used.
@@ -352,7 +330,6 @@ static int mmpcam_probe(struct platform_device *pdev)
 	mcam = &cam->mcam;
 	mcam->plat_power_up = mmpcam_power_up;
 	mcam->plat_power_down = mmpcam_power_down;
-	mcam->ctlr_reset = mcam_ctlr_reset;
 	mcam->calc_dphy = mmpcam_calc_dphy;
 	mcam->dev = &pdev->dev;
 	mcam->use_smbus = 0;
-- 
2.19.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux