Hi Jean-Michel, On 10/30/2018 06:41 PM, Jean-Michel Hautbois wrote: > Hi there, > > I am using the i.MX6D from Digi (connect core 6 sbc) with a mailine > kernel (well, 4.14 right now) and have an issue with mipi-csi2 > capture. > First I will give brief explanation of my setup, and then I will > detail the issue. > I have a camera sensor (OV2732, but could be any other sensor) > connected on a DS90UB953 FPD-Link III serializer. > Then a coax cable propagates the signal to a DS90UB954 FPD-Link III > deserializer. > > The DS90UB954 has the ability to work in a pattern generation mode, > and I will use it for the rest of the discussion. > It is an I²C device, and I have written a basic driver (for the moment > ;)) in order to make it visible on the imx6-mipi-csi2 bus as a camera > sensor. > I can give an access to the driver if necessary. It's sort of indirectly related, anyway, I utterly hope that the generic IC drivers will be ready and accepted for v4.21, see https://lwn.net/ml/devicetree/20181008211205.2900-1-vz@xxxxxxxxx/ Adding more ICs and cell devices to the framework is appreciated, in the queue there are DS90UB913, DS90Ux929, DS90Ux947, DS90UB964. Steve, in case if you're unaware, that's FYI also. -- Best wishes, Vladimir
