On 10/15/2018 05:15 PM, Niklas Söderlund wrote: > Hi Hans, > > Thanks for your patch. > > On 2018-10-12 13:30:02 +0200, Hans Verkuil wrote: >> The CEC IP is very similar between the three HDMI receivers, but >> not identical. Add support for all three variants. >> >> Tested with an adv7604 and an adv7612. >> >> Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> > > This fixes CEC on my Koelsch board using the adv7604. > > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> > > Side note do you know of a way to simulate a cycling of the physical HDMI > cable? My current test-case for CEC is: > > v4l2-ctl -d $(grep -l "adv7612" /sys/class/video4linux/*/name | sed 's#.*video4linux\(.*\)/name#/dev\1#g') --set-edid=type=hdmi > cec-ctl -d 0 --playback > cec-ctl -d 1 --tv > # Here I need to attach or if it already is connected disconnect and > # reconnect the HDMI cable > cec-ctl -d 0 -S > cec-ctl -d 1 -S > > If that step could be done in software I can add this test to my > automatic test scripts which would be nice. You can clear the EDID of the receiver: v4l2-ctl --clear-edid This will invalidate the physical address and pull the HPD low. Note: you'll need this recent patch: "adv7604: when the EDID is cleared, unconfigure CEC as well" Regards, Hans
