On Thu, Oct 04, 2018 at 02:29:32PM +0200, Neil Armstrong wrote: > Hi Ettore, > > On 02/10/2018 18:59, ektor5 wrote: > > This series of patches aims to add CEC functionalities to SECO > > devices, in particular UDOO X86. > > > > The communication is achieved via Braswell SMBus (i2c-i801) to the > > onboard STM32 microcontroller that handles the CEC signals. The driver > > use direct access to the PCI addresses, due to the limitations of the > > specific driver in presence of ACPI calls. > > > > The basic functionalities are tested with success with cec-ctl and > > cec-compliance. > > Glad to see another user of the i915 cec notifier ! Thanks to you for the patch! It works really well! Ettore > > Neil > > > > > Ettore Chimenti (2): > > media: add SECO cec driver > > seco-cec: add Consumer-IR support > > > > MAINTAINERS | 6 + > > drivers/media/platform/Kconfig | 21 + > > drivers/media/platform/Makefile | 4 + > > drivers/media/platform/seco-cec/Makefile | 1 + > > drivers/media/platform/seco-cec/seco-cec.c | 859 +++++++++++++++++++++ > > drivers/media/platform/seco-cec/seco-cec.h | 143 ++++ > > 6 files changed, 1034 insertions(+) > > create mode 100644 drivers/media/platform/seco-cec/Makefile > > create mode 100644 drivers/media/platform/seco-cec/seco-cec.c > > create mode 100644 drivers/media/platform/seco-cec/seco-cec.h > > >
