Hi Sakari Thanks for your comments. I am pushing the new version to https://github.com/ribalda/linux/tree/imx214-v6 Tomorrow morning after testing it on real hw I will send it to the list. Compared to v1, the driver now looks really good :) On Wed, Oct 3, 2018 at 9:47 PM Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> wrote: > > Hi Ricardo, > > Just a few more little comments. > > On Wed, Oct 03, 2018 at 03:09:51PM +0200, Ricardo Ribalda Delgado wrote: > > Add a V4L2 sub-device driver for the Sony IMX214 image sensor. > > This is a camera sensor using the I2C bus for control and the > > CSI-2 bus for data. > > > > Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera. > > > > Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx> > > Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx> > > --- > > Changelog from v3: > > > > Sakari Ailus (Thanks!): > > -Enable runtime PM > > -Exposure control > > -Use v4l2_find_nearest_size > > > > Notes: > > - v4l2_find_nearest_size is my new best friend. great hack! > > - I had to disable pm asap to avoid setting any control if we are not in > > streamon, otherwise the qcom i2c would not work. > > > > > > > > MAINTAINERS | 8 + > > drivers/media/i2c/Kconfig | 11 + > > drivers/media/i2c/Makefile | 1 + > > drivers/media/i2c/imx214.c | 1096 ++++++++++++++++++++++++++++++++++++ > > 4 files changed, 1116 insertions(+) > > create mode 100644 drivers/media/i2c/imx214.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 9989925f658d..2ae68894e700 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -13521,6 +13521,14 @@ S: Maintained > > F: drivers/ssb/ > > F: include/linux/ssb/ > > > > +SONY IMX214 SENSOR DRIVER > > +M: Ricardo Ribalda <ricardo.ribalda@xxxxxxxxx> > > +L: linux-media@xxxxxxxxxxxxxxx > > +T: git git://linuxtv.org/media_tree.git > > +S: Maintained > > +F: drivers/media/i2c/imx214.c > > +F: Documentation/devicetree/bindings/media/i2c/imx214.txt > > + > > SONY IMX258 SENSOR DRIVER > > M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> > > L: linux-media@xxxxxxxxxxxxxxx > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > > index bfdb494686bf..870976dee4a2 100644 > > --- a/drivers/media/i2c/Kconfig > > +++ b/drivers/media/i2c/Kconfig > > @@ -595,6 +595,17 @@ config VIDEO_APTINA_PLL > > config VIDEO_SMIAPP_PLL > > tristate > > > > +config VIDEO_IMX214 > > + tristate "Sony IMX214 sensor support" > > + depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > > + depends on MEDIA_CAMERA_SUPPORT > > Please add: > > depends on V4L2_FWNODE > > > + help > > + This is a Video4Linux2 sensor driver for the Sony > > + IMX214 camera. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called imx214. > > + > > config VIDEO_IMX258 > > tristate "Sony IMX258 sensor support" > > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > > index a94eb03d10d4..61305edc6165 100644 > > --- a/drivers/media/i2c/Makefile > > +++ b/drivers/media/i2c/Makefile > > @@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o > > obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o > > obj-$(CONFIG_VIDEO_OV2659) += ov2659.o > > obj-$(CONFIG_VIDEO_TC358743) += tc358743.o > > +obj-$(CONFIG_VIDEO_IMX214) += imx214.o > > obj-$(CONFIG_VIDEO_IMX258) += imx258.o > > obj-$(CONFIG_VIDEO_IMX274) += imx274.o > > > > diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c > > new file mode 100644 > > index 000000000000..0668c3a54053 > > --- /dev/null > > +++ b/drivers/media/i2c/imx214.c > > @@ -0,0 +1,1096 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * imx214.c - imx214 sensor driver > > + * > > + * Copyright 2018 Qtechnology A/S > > + * > > + * Ricardo Ribalda <ricardo.ribalda@xxxxxxxxx> > > + */ > > +#include <linux/clk.h> > > +#include <linux/delay.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/i2c.h> > > +#include <linux/module.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/regmap.h> > > +#include <linux/regulator/consumer.h> > > +#include <media/media-entity.h> > > +#include <media/v4l2-ctrls.h> > > +#include <media/v4l2-fwnode.h> > > +#include <media/v4l2-subdev.h> > > + > > +#define IMX214_DEFAULT_CLK_FREQ 24000000 > > +#define IMX214_DEFAULT_LINK_FREQ 480000000 > > +#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10) > > +#define IMX214_WIDTH 4096 > > +#define IMX214_HEIGHT 2304 > > +#define IMX214_FPS 30 > > +#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10 > > + > > +static const char * const imx214_supply_name[] = { > > + "vdda", > > + "vddd", > > + "vdddo", > > +}; > > + > > +#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name) > > + > > +struct imx214 { > > + struct device *dev; > > + struct clk *xclk; > > + struct regmap *regmap; > > + > > + struct v4l2_subdev sd; > > + struct media_pad pad; > > + struct v4l2_mbus_framefmt fmt; > > + struct v4l2_rect crop; > > + > > + struct v4l2_ctrl_handler ctrls; > > + struct v4l2_ctrl *pixel_rate; > > + struct v4l2_ctrl *link_freq; > > + struct v4l2_ctrl *exposure; > > + > > + struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES]; > > + > > + struct gpio_desc *enable_gpio; > > + > > + bool streaming; > > +}; > > + > > +struct reg_8 { > > + u16 addr; > > + u8 val; > > +}; > > + > > +enum { > > + IMX214_TABLE_WAIT_MS = 0, > > + IMX214_TABLE_END, > > + IMX214_MAX_RETRIES, > > + IMX214_WAIT_MS > > +}; > > + > > +/*From imx214_mode_tbls.h*/ > > +static const struct reg_8 mode_4096x2304[] = { > > + {0x0114, 0x03}, > > + {0x0220, 0x00}, > > + {0x0221, 0x11}, > > + {0x0222, 0x01}, > > + {0x0340, 0x0C}, > > + {0x0341, 0x7A}, > > + {0x0342, 0x13}, > > + {0x0343, 0x90}, > > + {0x0344, 0x00}, > > + {0x0345, 0x38}, > > + {0x0346, 0x01}, > > + {0x0347, 0x98}, > > + {0x0348, 0x10}, > > + {0x0349, 0x37}, > > + {0x034A, 0x0A}, > > + {0x034B, 0x97}, > > + {0x0381, 0x01}, > > + {0x0383, 0x01}, > > + {0x0385, 0x01}, > > + {0x0387, 0x01}, > > + {0x0900, 0x00}, > > + {0x0901, 0x00}, > > + {0x0902, 0x00}, > > + {0x3000, 0x35}, > > + {0x3054, 0x01}, > > + {0x305C, 0x11}, > > + > > + {0x0112, 0x0A}, > > + {0x0113, 0x0A}, > > + {0x034C, 0x10}, > > + {0x034D, 0x00}, > > + {0x034E, 0x09}, > > + {0x034F, 0x00}, > > + {0x0401, 0x00}, > > + {0x0404, 0x00}, > > + {0x0405, 0x10}, > > + {0x0408, 0x00}, > > + {0x0409, 0x00}, > > + {0x040A, 0x00}, > > + {0x040B, 0x00}, > > + {0x040C, 0x10}, > > + {0x040D, 0x00}, > > + {0x040E, 0x09}, > > + {0x040F, 0x00}, > > + > > + {0x0301, 0x05}, > > + {0x0303, 0x02}, > > + {0x0305, 0x03}, > > + {0x0306, 0x00}, > > + {0x0307, 0x96}, > > + {0x0309, 0x0A}, > > + {0x030B, 0x01}, > > + {0x0310, 0x00}, > > + > > + {0x0820, 0x12}, > > + {0x0821, 0xC0}, > > + {0x0822, 0x00}, > > + {0x0823, 0x00}, > > + > > + {0x3A03, 0x09}, > > + {0x3A04, 0x50}, > > + {0x3A05, 0x01}, > > + > > + {0x0B06, 0x01}, > > + {0x30A2, 0x00}, > > + > > + {0x30B4, 0x00}, > > + > > + {0x3A02, 0xFF}, > > + > > + {0x3011, 0x00}, > > + {0x3013, 0x01}, > > + > > + {0x0202, 0x0C}, > > + {0x0203, 0x70}, > > + {0x0224, 0x01}, > > + {0x0225, 0xF4}, > > + > > + {0x0204, 0x00}, > > + {0x0205, 0x00}, > > + {0x020E, 0x01}, > > + {0x020F, 0x00}, > > + {0x0210, 0x01}, > > + {0x0211, 0x00}, > > + {0x0212, 0x01}, > > + {0x0213, 0x00}, > > + {0x0214, 0x01}, > > + {0x0215, 0x00}, > > + {0x0216, 0x00}, > > + {0x0217, 0x00}, > > + > > + {0x4170, 0x00}, > > + {0x4171, 0x10}, > > + {0x4176, 0x00}, > > + {0x4177, 0x3C}, > > + {0xAE20, 0x04}, > > + {0xAE21, 0x5C}, > > + > > + {IMX214_TABLE_WAIT_MS, 10}, > > + {0x0138, 0x01}, > > + {IMX214_TABLE_END, 0x00} > > +}; > > + > > +static const struct reg_8 mode_1920x1080[] = { > > + {0x0114, 0x03}, > > + {0x0220, 0x00}, > > + {0x0221, 0x11}, > > + {0x0222, 0x01}, > > + {0x0340, 0x0C}, > > + {0x0341, 0x7A}, > > + {0x0342, 0x13}, > > + {0x0343, 0x90}, > > + {0x0344, 0x04}, > > + {0x0345, 0x78}, > > + {0x0346, 0x03}, > > + {0x0347, 0xFC}, > > + {0x0348, 0x0B}, > > + {0x0349, 0xF7}, > > + {0x034A, 0x08}, > > + {0x034B, 0x33}, > > + {0x0381, 0x01}, > > + {0x0383, 0x01}, > > + {0x0385, 0x01}, > > + {0x0387, 0x01}, > > + {0x0900, 0x00}, > > + {0x0901, 0x00}, > > + {0x0902, 0x00}, > > + {0x3000, 0x35}, > > + {0x3054, 0x01}, > > + {0x305C, 0x11}, > > + > > + {0x0112, 0x0A}, > > + {0x0113, 0x0A}, > > + {0x034C, 0x07}, > > + {0x034D, 0x80}, > > + {0x034E, 0x04}, > > + {0x034F, 0x38}, > > + {0x0401, 0x00}, > > + {0x0404, 0x00}, > > + {0x0405, 0x10}, > > + {0x0408, 0x00}, > > + {0x0409, 0x00}, > > + {0x040A, 0x00}, > > + {0x040B, 0x00}, > > + {0x040C, 0x07}, > > + {0x040D, 0x80}, > > + {0x040E, 0x04}, > > + {0x040F, 0x38}, > > + > > + {0x0301, 0x05}, > > + {0x0303, 0x02}, > > + {0x0305, 0x03}, > > + {0x0306, 0x00}, > > + {0x0307, 0x96}, > > + {0x0309, 0x0A}, > > + {0x030B, 0x01}, > > + {0x0310, 0x00}, > > + > > + {0x0820, 0x12}, > > + {0x0821, 0xC0}, > > + {0x0822, 0x00}, > > + {0x0823, 0x00}, > > + > > + {0x3A03, 0x04}, > > + {0x3A04, 0xF8}, > > + {0x3A05, 0x02}, > > + > > + {0x0B06, 0x01}, > > + {0x30A2, 0x00}, > > + > > + {0x30B4, 0x00}, > > + > > + {0x3A02, 0xFF}, > > + > > + {0x3011, 0x00}, > > + {0x3013, 0x01}, > > + > > + {0x0202, 0x0C}, > > + {0x0203, 0x70}, > > + {0x0224, 0x01}, > > + {0x0225, 0xF4}, > > + > > + {0x0204, 0x00}, > > + {0x0205, 0x00}, > > + {0x020E, 0x01}, > > + {0x020F, 0x00}, > > + {0x0210, 0x01}, > > + {0x0211, 0x00}, > > + {0x0212, 0x01}, > > + {0x0213, 0x00}, > > + {0x0214, 0x01}, > > + {0x0215, 0x00}, > > + {0x0216, 0x00}, > > + {0x0217, 0x00}, > > + > > + {0x4170, 0x00}, > > + {0x4171, 0x10}, > > + {0x4176, 0x00}, > > + {0x4177, 0x3C}, > > + {0xAE20, 0x04}, > > + {0xAE21, 0x5C}, > > + > > + {IMX214_TABLE_WAIT_MS, 10}, > > + {0x0138, 0x01}, > > + {IMX214_TABLE_END, 0x00} > > +}; > > + > > +static const struct reg_8 mode_table_common[] = { > > + /* software reset */ > > + > > + /* software standby settings */ > > + {0x0100, 0x00}, > > + > > + /* ATR setting */ > > + {0x9300, 0x02}, > > + > > + /* external clock setting */ > > + {0x0136, 0x18}, > > + {0x0137, 0x00}, > > + > > + /* global setting */ > > + /* basic config */ > > + {0x0101, 0x00}, > > + {0x0105, 0x01}, > > + {0x0106, 0x01}, > > + {0x4550, 0x02}, > > + {0x4601, 0x00}, > > + {0x4642, 0x05}, > > + {0x6227, 0x11}, > > + {0x6276, 0x00}, > > + {0x900E, 0x06}, > > + {0xA802, 0x90}, > > + {0xA803, 0x11}, > > + {0xA804, 0x62}, > > + {0xA805, 0x77}, > > + {0xA806, 0xAE}, > > + {0xA807, 0x34}, > > + {0xA808, 0xAE}, > > + {0xA809, 0x35}, > > + {0xA80A, 0x62}, > > + {0xA80B, 0x83}, > > + {0xAE33, 0x00}, > > + > > + /* analog setting */ > > + {0x4174, 0x00}, > > + {0x4175, 0x11}, > > + {0x4612, 0x29}, > > + {0x461B, 0x12}, > > + {0x461F, 0x06}, > > + {0x4635, 0x07}, > > + {0x4637, 0x30}, > > + {0x463F, 0x18}, > > + {0x4641, 0x0D}, > > + {0x465B, 0x12}, > > + {0x465F, 0x11}, > > + {0x4663, 0x11}, > > + {0x4667, 0x0F}, > > + {0x466F, 0x0F}, > > + {0x470E, 0x09}, > > + {0x4909, 0xAB}, > > + {0x490B, 0x95}, > > + {0x4915, 0x5D}, > > + {0x4A5F, 0xFF}, > > + {0x4A61, 0xFF}, > > + {0x4A73, 0x62}, > > + {0x4A85, 0x00}, > > + {0x4A87, 0xFF}, > > + > > + /* embedded data */ > > + {0x5041, 0x04}, > > + {0x583C, 0x04}, > > + {0x620E, 0x04}, > > + {0x6EB2, 0x01}, > > + {0x6EB3, 0x00}, > > + {0x9300, 0x02}, > > + > > + /* imagequality */ > > + /* HDR setting */ > > + {0x3001, 0x07}, > > + {0x6D12, 0x3F}, > > + {0x6D13, 0xFF}, > > + {0x9344, 0x03}, > > + {0x9706, 0x10}, > > + {0x9707, 0x03}, > > + {0x9708, 0x03}, > > + {0x9E04, 0x01}, > > + {0x9E05, 0x00}, > > + {0x9E0C, 0x01}, > > + {0x9E0D, 0x02}, > > + {0x9E24, 0x00}, > > + {0x9E25, 0x8C}, > > + {0x9E26, 0x00}, > > + {0x9E27, 0x94}, > > + {0x9E28, 0x00}, > > + {0x9E29, 0x96}, > > + > > + /* CNR parameter setting */ > > + {0x69DB, 0x01}, > > + > > + /* Moire reduction */ > > + {0x6957, 0x01}, > > + > > + /* image enhancment */ > > + {0x6987, 0x17}, > > + {0x698A, 0x03}, > > + {0x698B, 0x03}, > > + > > + /* white balanace */ > > + {0x0B8E, 0x01}, > > + {0x0B8F, 0x00}, > > + {0x0B90, 0x01}, > > + {0x0B91, 0x00}, > > + {0x0B92, 0x01}, > > + {0x0B93, 0x00}, > > + {0x0B94, 0x01}, > > + {0x0B95, 0x00}, > > + > > + /* ATR setting */ > > + {0x6E50, 0x00}, > > + {0x6E51, 0x32}, > > + {0x9340, 0x00}, > > + {0x9341, 0x3C}, > > + {0x9342, 0x03}, > > + {0x9343, 0xFF}, > > + {IMX214_TABLE_END, 0x00} > > +}; > > + > > +/* > > + * Declare modes in order, from biggest > > + * to smallest height. > > + */ > > +static const struct imx214_mode { > > + u32 width; > > + u32 height; > > + const struct reg_8 *reg_table; > > +} imx214_modes[] = { > > + { > > + .width = 4096, > > + .height = 2304, > > + .reg_table = mode_4096x2304, > > + }, > > + { > > + .width = 1920, > > + .height = 1080, > > + .reg_table = mode_1920x1080, > > + }, > > +}; > > + > > +static inline struct imx214 *to_imx214(struct v4l2_subdev *sd) > > +{ > > + return container_of(sd, struct imx214, sd); > > +} > > + > > +static int imx214_set_power_on(struct imx214 *imx214) > > +{ > > + int ret; > > + > > + ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies); > > + if (ret < 0) { > > + dev_err(imx214->dev, "failed to enable regulators: %d\n", ret); > > + return ret; > > + } > > + > > + usleep_range(2000, 3000); > > + > > + ret = clk_prepare_enable(imx214->xclk); > > + if (ret < 0) { > > + regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies); > > + dev_err(imx214->dev, "clk prepare enable failed\n"); > > + return ret; > > + } > > + > > + gpiod_set_value_cansleep(imx214->enable_gpio, 1); > > + usleep_range(12000, 15000); > > + > > + return 0; > > +} > > + > > +static void imx214_set_power_off(struct imx214 *imx214) > > +{ > > + gpiod_set_value_cansleep(imx214->enable_gpio, 0); > > + > > + clk_disable_unprepare(imx214->xclk); > > + > > + regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies); > > + usleep_range(10, 20); > > +} > > + > > +static int imx214_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_mbus_code_enum *code) > > +{ > > + if (code->index > 0) > > + return -EINVAL; > > + > > + code->code = IMX214_MBUS_CODE; > > + > > + return 0; > > +} > > + > > +static int imx214_enum_frame_size(struct v4l2_subdev *subdev, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_frame_size_enum *fse) > > +{ > > + if (fse->code != IMX214_MBUS_CODE) > > + return -EINVAL; > > + > > + if (fse->index >= ARRAY_SIZE(imx214_modes)) > > array_index_nospec() ?? I find it scary that you'd need that in drivers. > :-o > > > + return -EINVAL; > > + > > + fse->min_width = fse->max_width = imx214_modes[fse->index].width; > > + fse->min_height = fse->max_height = imx214_modes[fse->index].height; > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_VIDEO_ADV_DEBUG > > +static int imx214_s_register(struct v4l2_subdev *subdev, > > + const struct v4l2_dbg_register *reg) > > +{ > > + struct imx214 *imx214 = container_of(subdev, struct imx214, sd); > > + > > + return regmap_write(imx214->regmap, reg->reg, reg->val); > > +} > > + > > +static int imx214_g_register(struct v4l2_subdev *subdev, > > + struct v4l2_dbg_register *reg) > > +{ > > + struct imx214 *imx214 = container_of(subdev, struct imx214, sd); > > + unsigned int aux; > > + int ret; > > + > > + reg->size = 1; > > + ret = regmap_read(imx214->regmap, reg->reg, &aux); > > + reg->val = aux; > > + > > + return ret; > > +} > > +#endif > > + > > +static const struct v4l2_subdev_core_ops imx214_core_ops = { > > +#ifdef CONFIG_VIDEO_ADV_DEBUG > > + .g_register = imx214_g_register, > > + .s_register = imx214_s_register, > > +#endif > > +}; > > + > > +static struct v4l2_mbus_framefmt * > > +__imx214_get_pad_format(struct imx214 *imx214, > > + struct v4l2_subdev_pad_config *cfg, > > + unsigned int pad, > > + enum v4l2_subdev_format_whence which) > > +{ > > + switch (which) { > > + case V4L2_SUBDEV_FORMAT_TRY: > > + return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad); > > + case V4L2_SUBDEV_FORMAT_ACTIVE: > > + return &imx214->fmt; > > + default: > > + return NULL; > > + } > > +} > > + > > +static int imx214_get_format(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *format) > > +{ > > + struct imx214 *imx214 = to_imx214(sd); > > + > > + format->format = *__imx214_get_pad_format(imx214, cfg, format->pad, > > + format->which); > > + > > + return 0; > > +} > > + > > +static struct v4l2_rect * > > +__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg, > > + unsigned int pad, enum v4l2_subdev_format_whence which) > > +{ > > + switch (which) { > > + case V4L2_SUBDEV_FORMAT_TRY: > > + return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad); > > + case V4L2_SUBDEV_FORMAT_ACTIVE: > > + return &imx214->crop; > > + default: > > + return NULL; > > + } > > +} > > + > > +static int imx214_set_format(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_format *format) > > +{ > > + struct imx214 *imx214 = to_imx214(sd); > > + struct v4l2_mbus_framefmt *__format; > > + struct v4l2_rect *__crop; > > + const struct imx214_mode *mode; > > + > > + __crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which); > > + > > + if (format) > > + mode = v4l2_find_nearest_size(imx214_modes, > > + ARRAY_SIZE(imx214_modes), width, height, > > + format->format.width, format->format.height); > > + else > > + mode = &imx214_modes[0]; > > + > > + > > Extra newline. > > > + __crop->width = mode->width; > > + __crop->height = mode->height; > > + > > + __format = __imx214_get_pad_format(imx214, cfg, format->pad, > > + format->which); > > + __format->width = __crop->width; > > + __format->height = __crop->height; > > + __format->code = IMX214_MBUS_CODE; > > + __format->field = V4L2_FIELD_NONE; > > + __format->colorspace = V4L2_COLORSPACE_SRGB; > > + __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace); > > + __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, > > + __format->colorspace, __format->ycbcr_enc); > > + __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace); > > + > > + format->format = *__format; > > You'll need to serialise the above --- otherwise multiple calls setting the > format may be ongoing at the same time, assigning the format to > format->format. > > The same for get_format. > > > + > > + return 0; > > +} > > + > > +static int imx214_get_selection(struct v4l2_subdev *sd, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_selection *sel) > > +{ > > + struct imx214 *imx214 = to_imx214(sd); > > + > > + if (sel->target != V4L2_SEL_TGT_CROP) > > + return -EINVAL; > > + > > + sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad, > > + sel->which); > > Same here. > > > + return 0; > > +} > > + > > +static int imx214_entity_init_cfg(struct v4l2_subdev *subdev, > > + struct v4l2_subdev_pad_config *cfg) > > +{ > > + struct v4l2_subdev_format fmt = { }; > > + > > + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > > + fmt.format.width = imx214_modes[0].width; > > + fmt.format.height = imx214_modes[0].height; > > + > > + imx214_set_format(subdev, cfg, &fmt); > > + > > + return 0; > > +} > > + > > +static int imx214_set_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct imx214 *imx214 = container_of(ctrl->handler, > > + struct imx214, ctrls); > > + u8 vals[2]; > > + int ret; > > + > > + /* > > + * Applying V4L2 control value only happens > > + * when power is up for streaming > > + */ > > + if (!pm_runtime_get_if_in_use(imx214->dev)) > > + return 0; > > + > > + switch (ctrl->id) { > > + case V4L2_CID_EXPOSURE: > > + vals[1] = ctrl->val; > > + vals[0] = ctrl->val >> 8; > > + ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2); > > + if (ret < 0) > > + dev_err(imx214->dev, "Error %d\n", ret); > > + ret = 0; > > + break; > > + > > + default: > > + return -EINVAL; > > Oops! > > > + } > > + > > + pm_runtime_put(imx214->dev); > > + > > + return ret; > > +} > > + > > +static const struct v4l2_ctrl_ops imx214_ctrl_ops = { > > + .s_ctrl = imx214_set_ctrl, > > +}; > > + > > +#define MAX_CMD 4 > > +static int imx214_write_table(struct imx214 *imx214, > > + const struct reg_8 table[]) > > +{ > > + u8 vals[MAX_CMD]; > > + int ret; > > + int i; > > + > > + for (table = table; table->addr != IMX214_TABLE_END ; table++) { > > + if (table->addr == IMX214_TABLE_WAIT_MS) { > > + usleep_range(table->val * 1000, > > + table->val * 1000 + 500); > > + continue; > > + } > > + > > + for (i = 0; i < MAX_CMD; i++) { > > + if (table[i].addr != (table[0].addr + i)) > > + break; > > + vals[i] = table[i].val; > > + } > > + > > + ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i); > > + > > + if (ret) { > > + dev_err(imx214->dev, "write_table error: %d\n", ret); > > + return ret; > > + } > > + > > + table += i - 1; > > + } > > + > > + return 0; > > +} > > + > > +static int imx214_start_streaming(struct imx214 *imx214) > > +{ > > + int ret; > > It'd be nice to arrange variable declarations in a similar way in the > functions. I'd just swap the above and below line. > > > + const struct imx214_mode *mode; > > + > > + ret = imx214_set_power_on(imx214); > > + if (ret < 0) { > > + dev_err(imx214->dev, "could not set power on %d\n", ret); > > + return ret; > > + } > > + > > + ret = imx214_write_table(imx214, mode_table_common); > > + if (ret < 0) { > > + dev_err(imx214->dev, "could not sent common table %d\n", ret); > > + return ret; > > + } > > + > > + mode = v4l2_find_nearest_size(imx214_modes, > > + ARRAY_SIZE(imx214_modes), width, height, > > + imx214->fmt.width, imx214->fmt.height); > > + ret = imx214_write_table(imx214, mode->reg_table); > > + if (ret < 0) { > > + dev_err(imx214->dev, "could not sent mode table %d\n", ret); > > + return ret; > > + } > > + ret = v4l2_ctrl_handler_setup(&imx214->ctrls); > > + if (ret < 0) { > > + dev_err(imx214->dev, "could not sync v4l2 controls\n"); > > + return ret; > > + } > > + ret = regmap_write(imx214->regmap, 0x100, 1); > > + if (ret < 0) { > > + dev_err(imx214->dev, "could not sent start table %d\n", ret); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int imx214_stop_streaming(struct imx214 *imx214) > > +{ > > + int ret; > > + > > + ret = regmap_write(imx214->regmap, 0x100, 0); > > + if (ret < 0) > > + dev_err(imx214->dev, "could not sent stop table %d\n", ret); > > + > > + imx214_set_power_off(imx214); > > + return ret; > > +} > > + > > +static int imx214_s_stream(struct v4l2_subdev *subdev, int enable) > > +{ > > + struct imx214 *imx214 = to_imx214(subdev); > > + int ret; > > + > > + if (imx214->streaming == enable) > > + return 0; > > + > > + if (enable) { > > + ret = pm_runtime_get_sync(imx214->dev); > > + if (ret < 0) { > > + pm_runtime_put_noidle(imx214->dev); > > + return ret; > > + } > > + > > + ret = imx214_start_streaming(imx214); > > + if (ret < 0) > > + goto err_rpm_put; > > + } else { > > + ret = imx214_start_streaming(imx214); > > + goto err_rpm_put; > > + } > > + > > + imx214->streaming = enable; > > + return 0; > > + > > +err_rpm_put: > > + pm_runtime_put(imx214->dev); > > + return ret; > > +} > > + > > +static int imx214_g_frame_interval(struct v4l2_subdev *subdev, > > + struct v4l2_subdev_frame_interval *fival) > > +{ > > + fival->pad = 0; > > + fival->interval.numerator = 1; > > + fival->interval.denominator = IMX214_FPS; > > + > > + return 0; > > +} > > + > > +static int imx214_enum_frame_interval(struct v4l2_subdev *subdev, > > + struct v4l2_subdev_pad_config *cfg, > > + struct v4l2_subdev_frame_interval_enum *fie) > > +{ > > + const struct imx214_mode *mode; > > + > > + if (fie->index != 0) > > + return -EINVAL; > > + > > + mode = v4l2_find_nearest_size(imx214_modes, > > + ARRAY_SIZE(imx214_modes), width, height, > > + fie->width, fie->height); > > + > > + fie->code = IMX214_MBUS_CODE; > > + fie->width = mode->width; > > + fie->height = mode->height; > > + fie->interval.numerator = 1; > > + fie->interval.denominator = IMX214_FPS; > > + > > + return 0; > > +} > > + > > +static const struct v4l2_subdev_video_ops imx214_video_ops = { > > + .s_stream = imx214_s_stream, > > + .g_frame_interval = imx214_g_frame_interval, > > + .s_frame_interval = imx214_g_frame_interval, > > +}; > > + > > +static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = { > > + .enum_mbus_code = imx214_enum_mbus_code, > > + .enum_frame_size = imx214_enum_frame_size, > > + .enum_frame_interval = imx214_enum_frame_interval, > > + .get_fmt = imx214_get_format, > > + .set_fmt = imx214_set_format, > > + .get_selection = imx214_get_selection, > > + .init_cfg = imx214_entity_init_cfg, > > +}; > > + > > +static const struct v4l2_subdev_ops imx214_subdev_ops = { > > + .core = &imx214_core_ops, > > + .video = &imx214_video_ops, > > + .pad = &imx214_subdev_pad_ops, > > +}; > > + > > +static const struct regmap_config sensor_regmap_config = { > > + .reg_bits = 16, > > + .val_bits = 8, > > + .cache_type = REGCACHE_RBTREE, > > +}; > > + > > +static int imx214_get_regulators(struct device *dev, struct imx214 *imx214) > > +{ > > + int i; > > unsigned int > > > + > > + for (i = 0; i < IMX214_NUM_SUPPLIES; i++) > > + imx214->supplies[i].supply = imx214_supply_name[i]; > > + > > + return devm_regulator_bulk_get(dev, > > + IMX214_NUM_SUPPLIES, > > + imx214->supplies); > > +} > > + > > +static int imx214_parse_fwnode(struct device *dev) > > +{ > > + struct fwnode_handle *endpoint; > > + struct v4l2_fwnode_endpoint *bus_cfg; > > + int i; > > unsigned int > > > + int ret = 0; > > + > > + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); > > + if (!endpoint) { > > + dev_err(dev, "endpoint node not found\n"); > > + return -EINVAL; > > + } > > + > > + bus_cfg = v4l2_fwnode_endpoint_alloc_parse(endpoint); > > Have you seen: > > <URL:https://git.linuxtv.org/sailus/media_tree.git/log/?h=v4l2-fwnode> > > I'm hopeful this would be in media tree master Soon. > > > + if (IS_ERR(bus_cfg)) { > > + dev_err(dev, "parsing endpoint node failed\n"); > > + return PTR_ERR(bus_cfg); > > + } > > + > > + if (bus_cfg->bus_type != V4L2_MBUS_CSI2) { > > + dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n", > > + bus_cfg->bus_type, V4L2_MBUS_CSI2); > > + ret = -EINVAL; > > + goto done; > > + } > > + > > + for (i = 0 ; i < bus_cfg->nr_of_link_frequencies; i++) > > + if (bus_cfg->link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ) > > + break; > > + > > + if (i == bus_cfg->nr_of_link_frequencies) { > > + dev_err(dev, "link-frequencies %d not supported, Please review your DT\n", > > + IMX214_DEFAULT_LINK_FREQ); > > + ret = -EINVAL; > > + goto done; > > + } > > + > > +done: > > + v4l2_fwnode_endpoint_free(bus_cfg); > > + fwnode_handle_put(endpoint); > > + return ret; > > +} > > + > > + > > +static int __maybe_unused imx214_suspend(struct device *dev) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct imx214 *imx214 = to_imx214(sd); > > + > > + if (imx214->streaming) > > + imx214_stop_streaming(imx214); > > + > > + return 0; > > +} > > + > > +static int __maybe_unused imx214_resume(struct device *dev) > > +{ > > + struct i2c_client *client = to_i2c_client(dev); > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct imx214 *imx214 = to_imx214(sd); > > + int ret; > > + > > + if (imx214->streaming) { > > + ret = imx214_start_streaming(imx214); > > + if (ret) > > + goto error; > > + } > > + > > + return 0; > > + > > +error: > > + imx214_stop_streaming(imx214); > > + imx214->streaming = 0; > > + return ret; > > +} > > + > > +static int imx214_probe(struct i2c_client *client) > > +{ > > + struct device *dev = &client->dev; > > + struct imx214 *imx214; > > + int ret; > > Declare ret as last? > > > + static const s64 link_freq[] = { > > + IMX214_DEFAULT_LINK_FREQ, > > + }; > > + > > + ret = imx214_parse_fwnode(dev); > > + if (ret) > > + return ret; > > + > > + imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL); > > + if (!imx214) > > + return -ENOMEM; > > + > > + imx214->dev = dev; > > + > > + imx214->xclk = devm_clk_get(dev, NULL); > > + if (IS_ERR(imx214->xclk)) { > > + dev_err(dev, "could not get xclk"); > > + return PTR_ERR(imx214->xclk); > > + } > > + > > + ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ); > > + if (ret) { > > + dev_err(dev, "could not set xclk frequency\n"); > > + return ret; > > + } > > + > > + ret = imx214_get_regulators(dev, imx214); > > + if (ret < 0) { > > + dev_err(dev, "cannot get regulators\n"); > > + return ret; > > + } > > + > > + imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); > > + if (IS_ERR(imx214->enable_gpio)) { > > + dev_err(dev, "cannot get enable gpio\n"); > > + return PTR_ERR(imx214->enable_gpio); > > + } > > + > > + imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config); > > + if (IS_ERR(imx214->regmap)) { > > + dev_err(dev, "regmap init failed\n"); > > + return PTR_ERR(imx214->regmap); > > + } > > + > > + pm_runtime_set_active(imx214->dev); > > + pm_runtime_enable(imx214->dev); > > + pm_runtime_idle(imx214->dev); > > I think it'd help moving this just before the point where you access > hardware. > > If things fail and you'll return an error, please remember: > > pm_runtime_disable(imx214->dev); > > > + > > + v4l2_ctrl_handler_init(&imx214->ctrls, 3); > > + > > + imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL, > > + V4L2_CID_PIXEL_RATE, 0, > > + IMX214_DEFAULT_PIXEL_RATE, 1, > > + IMX214_DEFAULT_PIXEL_RATE); > > + imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL, > > + V4L2_CID_LINK_FREQ, > > + ARRAY_SIZE(link_freq) - 1, > > + 0, link_freq); > > + if (imx214->link_freq) > > + imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; > > + > > + /* > > + * WARNING! > > + * Values obtained reverse engineering blobs and/or devices. > > + * Ranges and functionality might be wrong. > > + * > > + * Sony, please release some register set documentation for the > > + * device. > > + * > > + * Yours sincerely, Ricardo. > > + */ > > + imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops, > > + V4L2_CID_EXPOSURE, > > + 0, 0xffff, 1, 0x0c70); > > The exposure is in lines so it can't exceed frame height + blanking. > There's a marginal, too. I don't know what it might be for this sensor > though. Usually it's small, such as 8 or 16. The image will almost > certainly be garbled if you exceed the allowed value. >Seems that this sensor On this sensor what I am experiencing instead of garbage is that the fps gets reduced. So I believe it is fine to set it up this way. > > + > > + ret = imx214->ctrls.error; > > + if (ret) { > > + dev_err(&client->dev, "%s control init failed (%d)\n", > > + __func__, ret); > > + goto free_ctrl; > > + } > > + > > + imx214->sd.ctrl_handler = &imx214->ctrls; > > + ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler); > > + if (ret) { > > + dev_err(&client->dev, > > + "Error %d setting default controls\n", ret); > > + goto free_ctrl; > > + } > > + > > + v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops); > > + imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > + imx214->pad.flags = MEDIA_PAD_FL_SOURCE; > > + imx214->sd.dev = &client->dev; > > + imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > + > > + ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad); > > + if (ret < 0) { > > + dev_err(dev, "could not register media entity\n"); > > + goto free_ctrl; > > + } > > + > > + imx214_entity_init_cfg(&imx214->sd, NULL); > > + > > + ret = v4l2_async_register_subdev_sensor_common(&imx214->sd); > > + if (ret < 0) { > > + dev_err(dev, "could not register v4l2 device\n"); > > + goto free_entity; > > + } > > + > > + return 0; > > + > > +free_entity: > > + media_entity_cleanup(&imx214->sd.entity); > > +free_ctrl: > > + v4l2_ctrl_handler_free(&imx214->ctrls); > > + > > + return ret; > > +} > > + > > +static int imx214_remove(struct i2c_client *client) > > +{ > > + struct v4l2_subdev *sd = i2c_get_clientdata(client); > > + struct imx214 *imx214 = to_imx214(sd); > > + > > + v4l2_async_unregister_subdev(&imx214->sd); > > + media_entity_cleanup(&imx214->sd.entity); > > + v4l2_ctrl_handler_free(&imx214->ctrls); > > + > > + pm_runtime_disable(&client->dev); > > + pm_runtime_set_suspended(&client->dev); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id imx214_of_match[] = { > > + { .compatible = "sony,imx214" }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, imx214_of_match); > > + > > +static const struct dev_pm_ops imx214_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(imx214_suspend, imx214_resume) > > You'll need the runtime PM ops as well, not only the system ones. Please > see e.g. the smiapp driver --- the runtime_resume and runtime_suspend > callbacks replace the s_power() callback that then can be removed. > > > +}; > > + > > +static struct i2c_driver imx214_i2c_driver = { > > + .driver = { > > + .of_match_table = imx214_of_match, > > + .pm = &imx214_pm_ops, > > + .name = "imx214", > > + }, > > + .probe_new = imx214_probe, > > + .remove = imx214_remove, > > +}; > > + > > +module_i2c_driver(imx214_i2c_driver); > > + > > +MODULE_DESCRIPTION("Sony IMX214 Camera drier"); > > +MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@xxxxxxxxx>"); > > +MODULE_LICENSE("GPL v2"); > > -- > Kind regards, > > Sakari Ailus > sakari.ailus@xxxxxxxxxxxxxxx -- Ricardo Ribalda
