Hi, On Wed, 26 Sep 2018 13:38:08 +0300 Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > Hi Maxime, > > On Wednesday, 26 September 2018 13:35:47 EEST maxime.ripard@xxxxxxxxxxx wrote: > > On Wed, Sep 26, 2018 at 01:19:34PM +0300, Laurent Pinchart wrote: > > > > +Endpoint node properties for CSI1 > > > > +--------------------------------- > > > > > > Should you list the CSI0 properties as well ? As the driver in patch 2/2 > > > doesn't support the CSI-2 interface I assume you have left out CSI0 for > > > now, but it should still be listed in the bindings. I'm fine with fixing > > > this as a follow-up patch to avoid missing the v4.20 merge window, but if > > > you end up resubmitting the series, could you please address the problem > > > ? > > > > That driver is not available, and the documentation isn't either, so > > there's no easy way to tell which properties are going to be needed > > before doing the actual work of reverse engineering it and writing a > > driver for it. Unfortunately... > > While DT bindings should be independent from driver implementations, I agree > it's difficult to develop good bindings without hardware documentation and > without at least one working driver implementation. > > How about just explicitly stating that these bindings don't support CSI0 yet ? OK. Thanks, Yong
