Add CEC support to the tda998x. Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> --- Note: this relies on this gpio patch series: https://www.spinics.net/lists/linux-gpio/msg32401.html and this follow-up gpio patch: https://www.spinics.net/lists/linux-gpio/msg32551.html that will appear in 4.20. Tested with my BeagleBone Black board. Regards, Hans --- arch/arm/boot/dts/am335x-boneblack-common.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index 325daae40278..07e6b36d17c4 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/display/tda998x.h> +#include <dt-bindings/interrupt-controller/irq.h> &ldo3_reg { regulator-min-microvolt = <1800000>; @@ -91,6 +92,8 @@ tda19988: tda19988 { compatible = "nxp,tda998x"; reg = <0x70>; + nxp,calib-gpios = <&gpio1 25 0>; + interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; -- 2.19.0
