Hi
On Thu, Sep 20, 2018 at 10:21 PM Pavel Machek <pavel@xxxxxx> wrote:
>
> Hi!
>
> > > > > ad5820: dac@0c {
> > > > > compatible = "adi,ad5820";
> > > > > reg = <0x0c>;
> > > > >
> > > > > VANA-supply = <&pm8994_l23>;
> > > > > enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
> > > > > };
> > > >
> > > > Well, I'm sure you could have gpio-based regulator powered from
> > > > pm8994_l23, and outputting to ad5820.
> > > >
> > > > Does ad5820 chip have a gpio input for enable?
> > >
> > > xshutdown pin:
> > > http://www.analog.com/media/en/technical-documentation/data-sheets/AD5821.pdf
> > >
> > > (AD5820,AD5821, and AD5823 are compatibles, or at least that is waht
> > > the module manufacturer says :)
> >
> > Aha, sorry for the noise.
> >
> > 2,3: Acked-by: Pavel Machek <pavel@xxxxxx>
>
> And I forgot to mention. If ad5821 and ad5823 are compatible, it would
> be good to mention it somewhere where it is easy to find... That can
> save quite a bit of work to someone.
>
For the ad5821 I have the datasheet and I would not mind adding it
For the ad5823 I have no datasheet, just a schematic from a camera
module saying: you can replace ad5823 with ad5821.
I think I will add this as an extra patch
> Thanks,
> Pavel
>
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
Ricardo Ribalda
