Hi, Tomasz, > -----Original Message----- > From: linux-media-owner@xxxxxxxxxxxxxxx [mailto:linux-media- > owner@xxxxxxxxxxxxxxx] On Behalf Of Tomasz Figa > Sent: Monday, July 2, 2018 2:05 AM > To: Zhi, Yong <yong.zhi@xxxxxxxxx> > Cc: Linux Media Mailing List <linux-media@xxxxxxxxxxxxxxx>; Sakari Ailus > <sakari.ailus@xxxxxxxxxxxxxxx>; Mani, Rajmohan > <rajmohan.mani@xxxxxxxxx>; Toivonen, Tuukka > <tuukka.toivonen@xxxxxxxxx>; Hu, Jerry W <jerry.w.hu@xxxxxxxxx>; Zheng, > Jian Xu <jian.xu.zheng@xxxxxxxxx> > Subject: Re: [PATCH v6 06/12] intel-ipu3: css: Add support for firmware > management > > Hi Yong, > > Continuing my review. Sorry for the delay. > > On Fri, Mar 30, 2018 at 11:15 AM Yong Zhi <yong.zhi@xxxxxxxxx> wrote: > > > > Introduce functions to load and install ImgU FW blobs. > > > > Signed-off-by: Yong Zhi <yong.zhi@xxxxxxxxx> > > --- > > drivers/media/pci/intel/ipu3/ipu3-abi.h | 1888 > ++++++++++++++++++++++++++++ > > drivers/media/pci/intel/ipu3/ipu3-css-fw.c | 261 ++++ > > drivers/media/pci/intel/ipu3/ipu3-css-fw.h | 198 +++ > > 3 files changed, 2347 insertions(+) > > create mode 100644 drivers/media/pci/intel/ipu3/ipu3-abi.h > > create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-fw.c > > create mode 100644 drivers/media/pci/intel/ipu3/ipu3-css-fw.h > > > > diff --git a/drivers/media/pci/intel/ipu3/ipu3-abi.h > > b/drivers/media/pci/intel/ipu3/ipu3-abi.h > > new file mode 100644 > > index 000000000000..24102647a89e > > --- /dev/null > > +++ b/drivers/media/pci/intel/ipu3/ipu3-abi.h > [snip] > > +/* SYSTEM_REQ_0_5_0_IMGHMMADR */ > > +#define IMGU_REG_SYSTEM_REQ 0x18 > > +#define IMGU_SYSTEM_REQ_FREQ_MASK 0x3f > > +#define IMGU_SYSTEM_REQ_FREQ_DIVIDER 25 > > +#define IMGU_REG_INT_STATUS 0x30 > > +#define IMGU_REG_INT_ENABLE 0x34 > > +#define IMGU_REG_INT_CSS_IRQ (1 << 31) > > BIT(31) > Ack. > [snip] > > + IMGU_ABI_FRAME_FORMAT_CSI_MIPI_LEGACY_YUV420_8, /* > Legacy YUV420. > > + * UY odd line; > > + * VY even line > > + */ > > + IMGU_ABI_FRAME_FORMAT_CSI_MIPI_YUV420_10,/* 10 bit per > Y/U/V. Y odd > > + * line; UYVY interleaved > > + * even line > > + */ > > + IMGU_ABI_FRAME_FORMAT_YCgCo444_16, /* Internal format for > > + ISP2.7, > > Macros and enums should be uppercase. > Ack. > [snip] > > +struct imgu_abi_shd_intra_frame_operations_data { > > + struct imgu_abi_acc_operation > > + operation_list[IMGU_ABI_SHD_MAX_OPERATIONS] > IPU3_ALIGN; > > + struct imgu_abi_acc_process_lines_cmd_data > > + process_lines_data[IMGU_ABI_SHD_MAX_PROCESS_LINES] > IPU3_ALIGN; > > + struct imgu_abi_shd_transfer_luts_set_data > > + transfer_data[IMGU_ABI_SHD_MAX_TRANSFERS] IPU3_ALIGN; > > +} __packed; > > + > > +struct imgu_abi_shd_config { > > + struct ipu3_uapi_shd_config_static shd IMGU_ABI_PAD; > > + struct imgu_abi_shd_intra_frame_operations_data shd_ops > IMGU_ABI_PAD; > > + struct ipu3_uapi_shd_lut shd_lut IMGU_ABI_PAD; > > Definitions of both IPU3_ALIGN and IMGU_ABI_PAD seem to be equivalent. > Could we remove one and use the other everywhere? > Agree, will remove IMGU_ABI_PAD. > [snip] > > +struct imgu_abi_osys_scaler_params { > > + __u32 inp_buf_y_st_addr; > > + __u32 inp_buf_y_line_stride; > > + __u32 inp_buf_y_buffer_stride; > > + __u32 inp_buf_u_st_addr; > > + __u32 inp_buf_v_st_addr; > > + __u32 inp_buf_uv_line_stride; > > + __u32 inp_buf_uv_buffer_stride; > > + __u32 inp_buf_chunk_width; > > + __u32 inp_buf_nr_buffers; > > + /* Output buffers */ > > + __u32 out_buf_y_st_addr; > > + __u32 out_buf_y_line_stride; > > + __u32 out_buf_y_buffer_stride; > > + __u32 out_buf_u_st_addr; > > + __u32 out_buf_v_st_addr; > > + __u32 out_buf_uv_line_stride; > > + __u32 out_buf_uv_buffer_stride; > > + __u32 out_buf_nr_buffers; > > + /* Intermediate buffers */ > > + __u32 int_buf_y_st_addr; > > + __u32 int_buf_y_line_stride; > > + __u32 int_buf_u_st_addr; > > + __u32 int_buf_v_st_addr; > > + __u32 int_buf_uv_line_stride; > > + __u32 int_buf_height; > > + __u32 int_buf_chunk_width; > > + __u32 int_buf_chunk_height; > > + /* Context buffers */ > > + __u32 ctx_buf_hor_y_st_addr; > > + __u32 ctx_buf_hor_u_st_addr; > > + __u32 ctx_buf_hor_v_st_addr; > > + __u32 ctx_buf_ver_y_st_addr; > > + __u32 ctx_buf_ver_u_st_addr; > > + __u32 ctx_buf_ver_v_st_addr; > > + /* Addresses for release-input and process-output tokens */ > > + __u32 release_inp_buf_addr; > > + __u32 release_inp_buf_en; > > + __u32 release_out_buf_en; > > + __u32 process_out_buf_addr; > > + /* Settings dimensions, padding, cropping */ > > + __u32 input_image_y_width; > > + __u32 input_image_y_height; > > + __u32 input_image_y_start_column; > > + __u32 input_image_uv_start_column; > > + __u32 input_image_y_left_pad; > > + __u32 input_image_uv_left_pad; > > + __u32 input_image_y_right_pad; > > + __u32 input_image_uv_right_pad; > > + __u32 input_image_y_top_pad; > > + __u32 input_image_uv_top_pad; > > + __u32 input_image_y_bottom_pad; > > + __u32 input_image_uv_bottom_pad; > > + __u32 processing_mode; > > +#define IMGU_ABI_OSYS_PROCMODE_BYPASS 0 > > +#define IMGU_ABI_OSYS_PROCMODE_UPSCALE 1 > > +#define IMGU_ABI_OSYS_PROCMODE_DOWNSCALE 2 > > Could we move it to a separate enum, to be consistent with other structs? > (e.g. imgu_abi_osys_frame_params::format) > Ack, will change all similar places as well. > > + __u32 scaling_ratio; > > + __u32 y_left_phase_init; > > + __u32 uv_left_phase_init; > > + __u32 y_top_phase_init; > > + __u32 uv_top_phase_init; > > + __u32 coeffs_exp_shift; > > + __u32 out_y_left_crop; > > + __u32 out_uv_left_crop; > > + __u32 out_y_top_crop; > > + __u32 out_uv_top_crop; > > +} __packed; > > + > > +struct imgu_abi_osys_scaler { > > + struct imgu_abi_osys_scaler_params param IPU3_ALIGN; } > > +__packed; > > + > > +struct imgu_abi_osys_frame_params { > > + /* Output pins */ > > + __u32 enable; > > + __u32 format; /* enum imgu_abi_osys_format */ > > + __u32 flip; > > + __u32 mirror; > > + __u32 tiling; /* enum imgu_abi_osys_tiling */ > > + __u32 width; > > + __u32 height; > > + __u32 stride; > > + __u32 scaled; > > +} __packed; > [snip] > > +/* Defect pixel correction */ > > + > > +struct imgu_abi_dpc_config { > > + __u8 __reserved[240832]; > > +} __packed; > > Do we need this structure? One could just add a reserved field in the parent > structure. Also, just to confirm, is 240832 really the right value here? > Where does it come from? Please create a macro for it, possibly further > breaking it down into the values used to compute this number. > We can add a reserved field in the parent structure, the size is based on original definition of dpc config which was removed since it's not enabled/used. > [snip] > > +struct imgu_abi_acc_param { > > + struct imgu_abi_stripe_data stripe; > > + __u8 padding[8]; > > + struct imgu_abi_input_feeder_config input_feeder; > > + struct ipu3_uapi_bnr_static_config bnr; > > + struct ipu3_uapi_bnr_static_config_green_disparity green_disparity > > + IPU3_ALIGN; > > + struct ipu3_uapi_dm_config dm IPU3_ALIGN; > > + struct ipu3_uapi_ccm_mat_config ccm IPU3_ALIGN; > > + struct ipu3_uapi_gamma_config gamma IPU3_ALIGN; > > + struct ipu3_uapi_csc_mat_config csc IPU3_ALIGN; > > + struct ipu3_uapi_cds_params cds IPU3_ALIGN; > > + struct imgu_abi_shd_config shd IPU3_ALIGN; > > + struct imgu_abi_dvs_stat_config dvs_stat; > > + __u8 padding1[224]; /* reserved for lace_stat */ > > + struct ipu3_uapi_yuvp1_iefd_config iefd IPU3_ALIGN; > > + struct ipu3_uapi_yuvp1_yds_config yds_c0 IPU3_ALIGN; > > + struct ipu3_uapi_yuvp1_chnr_config chnr_c0 IPU3_ALIGN; > > + struct ipu3_uapi_yuvp1_y_ee_nr_config y_ee_nr IPU3_ALIGN; > > + struct ipu3_uapi_yuvp1_yds_config yds IPU3_ALIGN; > > + struct ipu3_uapi_yuvp1_chnr_config chnr IPU3_ALIGN; > > + struct ipu3_uapi_yuvp2_y_tm_lut_static_config ytm IPU3_ALIGN; > > + struct ipu3_uapi_yuvp1_yds_config yds2 IPU3_ALIGN; > > + struct ipu3_uapi_yuvp2_tcc_static_config tcc IPU3_ALIGN; > > + struct imgu_abi_dpc_config dpc IPU3_ALIGN; > > + struct imgu_abi_bds_config bds; > > + struct ipu3_uapi_anr_config anr; > > + struct imgu_abi_awb_fr_config awb_fr; > > + struct imgu_abi_ae_config ae; > > + struct imgu_abi_af_config af; > > + struct imgu_abi_awb_config awb; > > + struct imgu_abi_osys_config osys; > > Why some fields here need and some don't need the IPU3_ALIGN specifier? > Originally all the fields had IPU3_ALIGN specifier. During the early reviews, Sakari wanted to see if the IPU3_ALIGN specifiers can be removed, where not needed (presumably to increase readability of the code). To address that, We removed these specifiers for cases, where 32 byte alignment was already there. > [snip] > > +/* > > + * Frame info struct. This describes the contents of an image frame > buffer. > > + */ > > +struct imgu_abi_frame_sp_info { > > + struct imgu_abi_sp_resolution res; > > + u16 padded_width; /* stride of line in memory > > + * (in pixels) > > + */ > > + u8 format; /* format of the frame data */ > > + u8 raw_bit_depth; /* number of valid bits per pixel, > > + * only valid for RAW bayer frames > > + */ > > + u8 raw_bayer_order; /* bayer order, only valid > > + * for RAW bayer frames > > + */ > > + u8 raw_type; /* To choose the proper raw frame type. for > > + * Legacy SKC pipes/Default is set to > > + * IMGU_ABI_RAW_TYPE_BAYER. For RGB IR sensor - > > + * driver should set it to: > > + * IronGr case - IMGU_ABI_RAW_TYPE_IR_ON_GR > > + * IronGb case - IMGU_ABI_RAW_TYPE_IR_ON_GB > > + */ > > +#define IMGU_ABI_RAW_TYPE_BAYER 0 > > +#define IMGU_ABI_RAW_TYPE_IR_ON_GR 1 > > +#define IMGU_ABI_RAW_TYPE_IR_ON_GB 2 > > Can we have a separate enum for this, consistently with other structs > defined earlier? > Yes. > [snip] > > +/* Information for a single pipeline stage */ struct > > +imgu_abi_sp_stage { > > + /* Multiple boolean flags can be stored in an integer */ > > + u8 num; /* Stage number */ > > + u8 isp_online; > > + u8 isp_copy_vf; > > + u8 isp_copy_output; > > + u8 sp_enable_xnr; > > + u8 isp_deci_log_factor; > > + u8 isp_vf_downscale_bits; > > + u8 deinterleaved; > > + /* > > + * NOTE: Programming the input circuit can only be done at the > > + * start of a session. It is illegal to program it during execution > > + * The input circuit defines the connectivity > > + */ > > + u8 program_input_circuit; > > + u8 func; > > +#define IMGU_ABI_STAGE_FUNC_RAW_COPY 0 > > +#define IMGU_ABI_STAGE_FUNC_BIN_COPY 1 > > +#define IMGU_ABI_STAGE_FUNC_ISYS_COPY 2 > > +#define IMGU_ABI_STAGE_FUNC_NO_FUNC 3 > > Enum please. > Ack. > > + u8 stage_type; /* The type of the pipe-stage */ > > +#define IMGU_ABI_STAGE_TYPE_SP 0 > > +#define IMGU_ABI_STAGE_TYPE_ISP 1 > > Enum please. > Ack. > [snip] > > +/* > > + * Blob descriptor. > > + * This structure describes an SP or ISP blob. > > + * It describes the test, data and bss sections as well as position > > +in a > > + * firmware file. > > + * For convenience, it contains dynamic data after loading. > > + */ > > +struct imgu_abi_blob_info { > > + /* Static blob data */ > > + u32 offset; /* Blob offset in fw file */ > > + struct imgu_abi_isp_param_memory_offsets memory_offsets; > > + /* offset wrt hdr in bytes */ > > + u32 prog_name_offset; /* offset wrt hdr in bytes */ > > + u32 size; /* Size of blob */ > > + u32 padding_size; /* total cummulative of bytes added > > + * due to section alignment > > + */ > > + u32 icache_source; /* Position of icache in blob */ > > + u32 icache_size; /* Size of icache section */ > > + u32 icache_padding; /* added due to icache section alignment */ > > + u32 text_source; /* Position of text in blob */ > > + u32 text_size; /* Size of text section */ > > + u32 text_padding; /* bytes added due to text section alignment > */ > > + u32 data_source; /* Position of data in blob */ > > + u32 data_target; /* Start of data in SP dmem */ > > + u32 data_size; /* Size of text section */ > > + u32 data_padding; /* bytes added due to data section alignment > */ > > + u32 bss_target; /* Start position of bss in SP dmem */ > > + u32 bss_size; /* Size of bss section > > + * Dynamic data filled by loader > > + */ > > + const void *code __aligned(8); /* Code section absolute pointer */ > > + /* within fw, code = icache + text */ > > + const void *data __aligned(8); /* Data section absolute pointer */ > > + /* within fw, data = data + > > +bss */ > > How are these pointers used? I couldn't find any code referencing them. Are > you sure these are kernel pointers (e.g. not just some offsets)? > Will change pointer to u64, not clear how they are used, will check with our R&D. > [snip] > > +struct imgu_abi_binary_input_info { > > + u32 min_width; > > + u32 min_height; > > + u32 max_width; > > + u32 max_height; > > + u32 source; /* memory, sensor, variable */ > > +#define IMGU_ABI_BINARY_INPUT_SOURCE_SENSOR 0 > > +#define IMGU_ABI_BINARY_INPUT_SOURCE_MEMORY 1 > > +#define IMGU_ABI_BINARY_INPUT_SOURCE_VARIABLE 2 > > Enum please. > Ack. > [snip] > > +/* Information for a pipeline */ > > +struct imgu_abi_sp_pipeline { > > + u32 pipe_id; /* the pipe ID */ > > + u32 pipe_num; /* the dynamic pipe number */ > > + u32 thread_id; /* the sp thread ID */ > > + u32 pipe_config; /* the pipe config */ > > +#define IMGU_ABI_PIPE_CONFIG_ACQUIRE_ISP (1 << 31) > > + u32 pipe_qos_config; /* Bitmap of multiple QOS extension fw > > + * state, 0xffffffff indicates non > > + * QOS pipe. > > + */ > > + u32 inout_port_config; > > +#define IMGU_ABI_PORT_CONFIG_TYPE_INPUT_HOST (1 << 0) > > +#define IMGU_ABI_PORT_CONFIG_TYPE_INPUT_COPYSINK (1 << 1) > > +#define IMGU_ABI_PORT_CONFIG_TYPE_INPUT_TAGGERSINK (1 << 2) > > +#define IMGU_ABI_PORT_CONFIG_TYPE_OUTPUT_HOST (1 << 4) > > +#define IMGU_ABI_PORT_CONFIG_TYPE_OUTPUT_COPYSINK (1 << 5) > > +#define IMGU_ABI_PORT_CONFIG_TYPE_OUTPUT_TAGGERSINK (1 << > 6) > > + u32 required_bds_factor; > > + u32 dvs_frame_delay; > > + u32 num_stages; /* the pipe config */ > > + u32 running; /* needed for pipe termination */ > > + imgu_addr_t sp_stage_addr[IMGU_ABI_MAX_STAGES]; > > + imgu_addr_t scaler_pp_lut; /* Early bound LUT */ > > + u32 stage; /* stage ptr is only used on sp */ > > + s32 num_execs; /* number of times to run if this is > > + * an acceleration pipe. > > + */ > > + union { > > + struct { > > + u32 bytes_available; > > + > > The message is cut off here for me. Please split this patch for next respin. > Possibly 1 patch for registers and enums at the top, then 1 patch for structs > and 1 more patch for the code being added in this patch. > Ack, will break the file into 3 patches as suggested. Again, thanks a lot for the time spent to review this long file. > Best regards, > Tomasz
