Re: [PATCH 1/3] i2c: adv748x: store number of CSI-2 lanes described in device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kieran,

On Tuesday, 18 September 2018 13:19:39 EEST Kieran Bingham wrote:
> On 18/09/18 02:45, Niklas Söderlund wrote:
> > The adv748x CSI-2 transmitters TXA and TXB can use different number of
> > lines to transmit data on. In order to be able configure the device
> > correctly this information need to be parsed from device tree and stored
> > in each TX private data structure.
> > 
> > TXA supports 1, 2 and 4 lanes while TXB supports 1 lane.
> 
> Am I right in assuming that it is the CSI device which specifies the
> number of lanes in their DT?

Do you mean the CSI-2 receiver ? Both the receiver and the transmitter should 
specify the data lanes in their DT node.

> Could we make this clear in the commit log (and possibly an extra
> comment in the code). At first I was assuming we would have to declare
> the number of lanes in the ADV748x TX DT node, but I don't think that's
> the case.
> 
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> > ---
> > 
> >  drivers/media/i2c/adv748x/adv748x-core.c | 49 ++++++++++++++++++++++++
> >  drivers/media/i2c/adv748x/adv748x.h      |  1 +
> >  2 files changed, 50 insertions(+)
> > 
> > diff --git a/drivers/media/i2c/adv748x/adv748x-core.c
> > b/drivers/media/i2c/adv748x/adv748x-core.c index
> > 85c027bdcd56748d..a93f8ea89a228474 100644
> > --- a/drivers/media/i2c/adv748x/adv748x-core.c
> > +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> > @@ -23,6 +23,7 @@
 >  #include <media/v4l2-ctrls.h>
> >  #include <media/v4l2-device.h>
> >  #include <media/v4l2-dv-timings.h>
> > +#include <media/v4l2-fwnode.h>
> >  #include <media/v4l2-ioctl.h>
> >  
> >  #include "adv748x.h"
> > @@ -561,11 +562,54 @@ void adv748x_subdev_init(struct v4l2_subdev *sd,
> > struct adv748x_state *state,
> >  	sd->entity.ops = &adv748x_media_ops;
> >  }
> > 
> > +static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
> > +				    unsigned int port,
> > +				    struct device_node *ep)
> > +{
> > +	struct v4l2_fwnode_endpoint vep;
> > +	unsigned int num_lanes;
> > +	int ret;
> > +
> > +	if (port != ADV748X_PORT_TXA && port != ADV748X_PORT_TXB)
> > +		return 0;
> > +
> > +	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &vep);
> > +	if (ret)
> > +		return ret;
> > +
> > +	num_lanes = vep.bus.mipi_csi2.num_data_lanes;
> > +
> 
> If I'm not mistaken we are parsing /someone elses/ DT node here (the CSI
> receiver or such).

Aren't we parsing our own endpoint ? The ep argument comes from ep_np in 
adv748x_parse_dt(), and that's the endpoint iterator used with

	for_each_endpoint_of_node(state->dev->of_node, ep_np)

> Is it now guaranteed on the mipi_csi2 bus to have the (correct) lanes
> defined?
> 
> Do we need to fall back to some safe defaults at all (1 lane?) ?
> Actually - perhaps there is no safe default. I guess if the lanes aren't
> configured correctly we're not going to get a good signal at the other end.

The endpoints should contain a data-lanes property. That's the case in the 
mainline DT sources, but it's not explicitly stated as a mandatory property. I 
think we should update the bindings.

> > +	if (vep.base.port == ADV748X_PORT_TXA) {
> > +		if (num_lanes != 1 && num_lanes != 2 && num_lanes != 4) {
> > +			adv_err(state, "TXA: Invalid number (%d) of lanes\n",
> > +				num_lanes);
> > +			return -EINVAL;
> > +		}
> > +
> > +		state->txa.num_lanes = num_lanes;
> > +		adv_dbg(state, "TXA: using %d lanes\n", state->txa.num_lanes);
> > +	}
> > +
> > +	if (vep.base.port == ADV748X_PORT_TXB) {
> > +		if (num_lanes != 1) {
> > +			adv_err(state, "TXB: Invalid number (%d) of lanes\n",
> > +				num_lanes);
> > +			return -EINVAL;
> > +		}
> > +
> > +		state->txb.num_lanes = num_lanes;
> > +		adv_dbg(state, "TXB: using %d lanes\n", state->txb.num_lanes);
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> >  static int adv748x_parse_dt(struct adv748x_state *state)
> >  {
> >  	struct device_node *ep_np = NULL;
> >  	struct of_endpoint ep;
> >  	bool found = false;
> > +	int ret;
> > 
> >  	for_each_endpoint_of_node(state->dev->of_node, ep_np) {
> >  		of_graph_parse_endpoint(ep_np, &ep);
> > @@ -589,6 +633,11 @@ static int adv748x_parse_dt(struct adv748x_state
> > *state)
> >  		state->endpoints[ep.port] = ep_np;
> >  		
> >  		found = true;
> > +
> > +		/* Store number of CSI-2 lanes used for TXA and TXB. */
> > +		ret = adv748x_parse_csi2_lanes(state, ep.port, ep_np);
> > +		if (ret)
> > +			return ret;
> >  	}
> >  	
> >  	return found ? 0 : -ENODEV;
> > diff --git a/drivers/media/i2c/adv748x/adv748x.h
> > b/drivers/media/i2c/adv748x/adv748x.h index
> > c9016acaba34aff2..88ad06a3045c5427 100644
> > --- a/drivers/media/i2c/adv748x/adv748x.h
> > +++ b/drivers/media/i2c/adv748x/adv748x.h
> > @@ -78,6 +78,7 @@ struct adv748x_csi2 {
> >  	struct adv748x_state *state;
> >  	struct v4l2_mbus_framefmt format;
> >  	unsigned int page;
> > +	unsigned int num_lanes;
> > 
> >  	struct media_pad pads[ADV748X_CSI2_NR_PADS];
> >  	struct v4l2_ctrl_handler ctrl_hdl;

-- 
Regards,

Laurent Pinchart







[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux