2009/12/22 Devin Heitmueller <dheitmueller@xxxxxxxxxxxxxx>:
> On Tue, Dec 22, 2009 at 10:11 AM, Valerio Bontempi
> <valerio.bontempi@xxxxxxxxx> wrote:
>> Before the update, v4l-dvb driver worked fine, and now it doesn't work
>> even if I remove the updated packages.
>> Checking for kernel modules conflict, I found only the modules
>> installed by v4l-dvb sources.
>> #find /lib/modules/`uname -r` -name 'em28xx*' | xargs -i ls -l {}
>> totale 236
>> -rw-r--r-- 1 root root 21464 22 dic 16:03
>> /lib/modules/2.6.31.5-0.1-desktop/kernel/drivers/media/video/em28xx/em28xx-alsa.ko
>> -rw-r--r-- 1 root root 26176 22 dic 16:03
>> /lib/modules/2.6.31.5-0.1-desktop/kernel/drivers/media/video/em28xx/em28xx-dvb.ko
>> -rw-r--r-- 1 root root 184936 22 dic 16:03
>> /lib/modules/2.6.31.5-0.1-desktop/kernel/drivers/media/video/em28xx/em28xx.ko
>
> My guess is that these files were provided by your distro through a
> kernel update (and in 2.6.31 this board is known to have problems
> which have been fixed in the latest v4l-dvb tree).
>
> I would suggest the following going into your v4l-dvb tree and doing
> the following:
>
> make distclean && make && make install && reboot
>
> And see if the problem clears up.
>
> Devin
>
> --
> Devin J. Heitmueller - Kernel Labs
> http://www.kernellabs.com
>
This is just I have done after removing the update packages (all
related to v4l libs and tools, none related to opensuse kernel), but
with no luck
However I have just tried what you suggested, but the problem hasn't
been cleared up
[ 7.276755] em28xx: New device TerraTec Electronic GmbH Cinergy T
USB XS @ 480 Mbps (0ccd:0043, interface 0, class 0)
[ 7.276993] em28xx #0: chip ID is em2870
[ 7.310070] vc032x: Sensor ID 7673 (16)
[ 7.310075] vc032x: Find Sensor OV7670
[ 7.310187] gspca: /dev/video0 created
[ 7.310224] usbcore: registered new interface driver vc032x
[ 7.310228] vc032x: registered
[ 7.394941] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 43 00 c0 12
5c 00 9e 24 6a 34
[ 7.394956] em28xx #0: i2c eeprom 10: 00 00 06 57 02 0c 00 00 00 00
00 00 00 00 00 00
[ 7.394967] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00
00 00 5b 00 00 00
[ 7.394977] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01
00 00 00 00 00 00
[ 7.394988] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 7.394998] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 7.395008] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00
34 03 54 00 65 00
[ 7.395021] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00
63 00 20 00 45 00
[ 7.395032] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00
6f 00 6e 00 69 00
[ 7.395042] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00
48 00 00 00 24 03
[ 7.395052] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00
67 00 79 00 20 00
[ 7.395063] em28xx #0: i2c eeprom b0: 54 00 20 00 55 00 53 00 42 00
20 00 58 00 53 00
[ 7.395074] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 7.395084] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 7.395094] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 7.395104] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00
[ 7.395116] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xbfdf1b96
[ 7.395119] em28xx #0: EEPROM info:
[ 7.395120] em28xx #0: No audio on board.
[ 7.395122] em28xx #0: 500mA max power
[ 7.395125] em28xx #0: Table at 0x06, strings=0x249e, 0x346a, 0x0000
[ 7.395813] em28xx #0: Identified as Terratec Cinergy T XS (card=43)
[ 7.395816] em28xx #0:
[ 7.395816]
[ 7.395830] em28xx #0: The support for this board weren't valid yet.
[ 7.395838] em28xx #0: Please send a report of having this working
[ 7.395845] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 7.395846]
[ 7.412090] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @
0, addr 00:1a:92:34:d4:d7
[ 7.412096] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[ 7.412275] k8temp 0000:00:18.3: Temperature readouts might be
wrong - check erratum #141
[ 7.414043] EDAC amd64: This node reports that Memory ECC is
currently disabled.
[ 7.414048] EDAC amd64: bit 0x400000 in register F3x44 of the
MISC_CONTROL device (0000:00:18.3) should be enabled
[ 7.414051] EDAC amd64: WARNING: ECC is NOT currently enabled by
the BIOS. Module will NOT be loaded.
[ 7.414053] Either Enable ECC in the BIOS, or use the
'ecc_enable_override' parameter.
[ 7.414055] Might be a BIOS bug, if BIOS says ECC is enabled
[ 7.414056] Use of the override can cause unknown side effects.
[ 7.414073] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 7.501404] usbcore: registered new interface driver snd-usb-audio
[ 7.843367] tuner 2-0061: chip found @ 0xc2 (em28xx #0)
[ 8.123514] xc2028 2-0061: creating new instance
[ 8.123519] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 8.123530] usb 1-4: firmware: requesting xc3028-v27.fw
[ 8.134197] xc2028 2-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 8.167270] xc2028 2-0061: Loading firmware for type=BASE (1), id
0000000000000000.
[ 8.310475] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000f828c2]
[ 8.440483] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c01510ec213]
[ 9.574269] xc2028 2-0061: Loading firmware for type=(0), id
000000000000b700.
[ 9.600262] SCODE (20000000), id 000000000000b700:
[ 9.600267] xc2028 2-0061: Loading SCODE for type=MONO SCODE
HAS_IF_4320 (60008000), id 0000000000008000.
[ 9.723270] em28xx #0: v4l2 driver version 0.1.2
[ 9.728271] em28xx #0: V4L2 video device registered as /dev/video1
[ 9.729313] usbcore: registered new interface driver em28xx
[ 9.729317] em28xx driver loaded
[ 9.811316] zl10353_read_register: readreg error (reg=127, ret==-19)
[ 9.837317] mt352_read_register: readreg error (reg=127, ret==-19)
[ 9.837412] em28xx #0: /2: dvb frontend not attached. Can't attach xc3028
[ 9.837494] Em28xx: Initialized (Em28xx dvb Extension) extension
and
#find /lib/modules/`uname -r` -name 'em28xx*' | xargs -i ls -l {}
-rw-r--r-- 1 root root 21464 22 dic 17:07
/lib/modules/2.6.31.5-0.1-desktop/kernel/drivers/media/video/em28xx/em28xx-alsa.ko
-rw-r--r-- 1 root root 26176 22 dic 17:07
/lib/modules/2.6.31.5-0.1-desktop/kernel/drivers/media/video/em28xx/em28xx-dvb.ko
-rw-r--r-- 1 root root 184936 22 dic 17:07
/lib/modules/2.6.31.5-0.1-desktop/kernel/drivers/media/video/em28xx/em28xx.ko
shows that I have install only the just compiled modules
I also tried to update my downloaded v4l-dvb tree to its last version,
but I am not able to install it, I receive a lot of undefined symbol
error after modprobe em28xx.
Valerio
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
