Re: [PATCH 3/3] media: renesas-ceu: Use default mbus settings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sakari,

On Thu, Sep 13, 2018 at 05:22:36PM +0300, Sakari Ailus wrote:
> Hi Jacopo,
>
> On Thu, Sep 13, 2018 at 03:59:51PM +0200, Jacopo Mondi wrote:
> > As the v4l2-fwnode now allows drivers to set defaults, and eventually
> > override them by specifying properties in DTS, use defaults for the CEU
> > driver.
> >
> > Also remove endpoint properties from the gr-peach-audiocamerashield as
> > they match the defaults now specified in the driver code.
> >
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi |  4 ----
> >  drivers/media/platform/renesas-ceu.c              | 20 +++++++++++---------
> >  2 files changed, 11 insertions(+), 13 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
> > index e31a9e3..8d77579 100644
> > --- a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
> > +++ b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
> > @@ -69,10 +69,6 @@
> >
> >  	port {
> >  		ceu_in: endpoint {
> > -			hsync-active = <1>;
> > -			vsync-active = <1>;
> > -			bus-width = <8>;
> > -			pclk-sample = <1>;
>
> Do I understand correctly that pclk-sample was never relevant for the
> hardware, and is removed because of that? You could mention that in the
> commit message. That's perhaps a minor detail.

Correct, it's not relevant for the CEU, as it cannot be configured.

>
> The set seems good to me.

I can add that to commit message and re-send, or if it's easier for
you, you can change the last paragraph when applying to:

Also remove endpoint properties from the gr-peach-audiocamerashield as
they match the defaults now specified in the driver code
(h/vsync-active and bus-width) or are not relevant to the interface
as they cannot be configured (pclk-sample).

Thanks
  j

>
> >  			remote-endpoint = <&mt9v111_out>;
> >  		};
> >  	};
> > diff --git a/drivers/media/platform/renesas-ceu.c b/drivers/media/platform/renesas-ceu.c
> > index 035f1d3..150196f 100644
> > --- a/drivers/media/platform/renesas-ceu.c
> > +++ b/drivers/media/platform/renesas-ceu.c
> > @@ -1551,7 +1551,16 @@ static int ceu_parse_dt(struct ceu_device *ceudev)
> >  		return ret;
> >
> >  	for (i = 0; i < num_ep; i++) {
> > -		struct v4l2_fwnode_endpoint fw_ep = { .bus_type = 0 };
> > +		struct v4l2_fwnode_endpoint fw_ep = {
> > +			.bus_type = V4L2_MBUS_PARALLEL,
> > +			.bus = {
> > +				.parallel = {
> > +					.flags = V4L2_MBUS_HSYNC_ACTIVE_HIGH |
> > +						 V4L2_MBUS_VSYNC_ACTIVE_HIGH,
> > +					.bus_width = 8,
> > +				},
> > +			},
> > +		};
> >
> >  		ep = of_graph_get_endpoint_by_regs(of, 0, i);
> >  		if (!ep) {
> > @@ -1564,14 +1573,7 @@ static int ceu_parse_dt(struct ceu_device *ceudev)
> >  		ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &fw_ep);
> >  		if (ret) {
> >  			dev_err(ceudev->dev,
> > -				"Unable to parse endpoint #%u.\n", i);
> > -			goto error_cleanup;
> > -		}
> > -
> > -		if (fw_ep.bus_type != V4L2_MBUS_PARALLEL) {
> > -			dev_err(ceudev->dev,
> > -				"Only parallel input supported.\n");
> > -			ret = -EINVAL;
> > +				"Unable to parse endpoint #%u: %d.\n", i, ret);
> >  			goto error_cleanup;
> >  		}
> >
>
> --
> Kind regards,
>
> Sakari Ailus
> sakari.ailus@xxxxxxxxxxxxxxx

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux