ov5640_set_mode_exposure_calc() is checking binning value but
binning value read is buggy, fix this.
Rename ov5640_binning_on() to ov5640_get_binning() as per other
similar functions.
Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/ov5640.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 7c569de..9fb17b5 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1349,7 +1349,7 @@ static int ov5640_set_ae_target(struct ov5640_dev *sensor, int target)
return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1F, fast_low);
}
-static int ov5640_binning_on(struct ov5640_dev *sensor)
+static int ov5640_get_binning(struct ov5640_dev *sensor)
{
u8 temp;
int ret;
@@ -1357,8 +1357,8 @@ static int ov5640_binning_on(struct ov5640_dev *sensor)
ret = ov5640_read_reg(sensor, OV5640_REG_TIMING_TC_REG21, &temp);
if (ret)
return ret;
- temp &= 0xfe;
- return temp ? 1 : 0;
+
+ return temp & BIT(0);
}
static int ov5640_set_binning(struct ov5640_dev *sensor, bool enable)
@@ -1468,7 +1468,7 @@ static int ov5640_set_mode_exposure_calc(struct ov5640_dev *sensor,
if (ret < 0)
return ret;
prev_shutter = ret;
- ret = ov5640_binning_on(sensor);
+ ret = ov5640_get_binning(sensor);
if (ret < 0)
return ret;
if (ret && mode->id != OV5640_MODE_720P_1280_720 &&
--
2.7.4
