Hi, Le dimanche 09 septembre 2018 à 11:04 +0200, Hans Verkuil a écrit : > On 09/08/2018 09:42 PM, Paul Kocialkowski wrote: > > Hi, > > > > Le samedi 08 septembre 2018 à 13:24 +0200, Hans Verkuil a écrit : > > > On 09/08/2018 12:22 PM, Chen-Yu Tsai wrote: > > > > On Sat, Sep 8, 2018 at 6:06 PM Hans Verkuil <hverkuil@xxxxxxxxx> wrote: > > > > > > > > > > On 09/07/2018 06:33 PM, Paul Kocialkowski wrote: > > > > > > This brings the requested modifications on top of version 9 of the > > > > > > Cedrus VPU driver, that implements stateless video decoding using the > > > > > > Request API. > > > > > > > > > > > > Paul Kocialkowski (2): > > > > > > media: cedrus: Fix error reporting in request validation > > > > > > media: cedrus: Add TODO file with tasks to complete before unstaging > > > > > > > > > > > > drivers/staging/media/sunxi/cedrus/TODO | 7 +++++++ > > > > > > drivers/staging/media/sunxi/cedrus/cedrus.c | 15 ++++++++++++--- > > > > > > 2 files changed, 19 insertions(+), 3 deletions(-) > > > > > > create mode 100644 drivers/staging/media/sunxi/cedrus/TODO > > > > > > > > > > > > > > > > So close... > > > > > > > > > > When compiling under e.g. intel I get errors since it doesn't know about > > > > > the sunxi_sram_claim/release function and the PHYS_PFN_OFFSET define. > > > > > > > > > > Is it possible to add stub functions to linux/soc/sunxi/sunxi_sram.h > > > > > if CONFIG_SUNXI_SRAM is not defined? That would be the best fix for that. > > > > > > > > > > The use of PHYS_PFN_OFFSET is weird: are you sure this is the right > > > > > way? I see that drivers/of/device.c also sets dev->dma_pfn_offset, which > > > > > makes me wonder if this information shouldn't come from the device tree. > > > > > > > > > > You are the only driver that uses this define directly, which makes me > > > > > suspicious. > > > > > > > > On Allwinner platforms, some devices do DMA directly on the memory BUS > > > > with the DRAM controller. In such cases, the DRAM has no offset. In all > > > > other cases where the DMA goes through the common system bus and the DRAM > > > > offset is either 0x40000000 or 0x20000000, depending on the SoC. Since the > > > > former case is not described in the device tree (this is being worked on > > > > by Maxime BTW), the dma_pfn_offset is not the value it should be. AFAIK > > > > only the display and media subsystems (VPU, camera, TS) are wired this > > > > way. > > > > > > > > In drivers/gpu/drm/sun4i/sun4i_backend.c (the display driver) we use > > > > PHYS_OFFSET, which is pretty much the same thing. > > > > > > > > > > OK, in that case just put #ifdef PHYS_PFN_OFFSET around that line together > > > with a comment that this will eventually come from the device tree. > > > > That seems fine, although I'm less certain about what to do for the > > SRAM situation. Other drivers that use SUNXI_SRAM have a Kconfig select > > on it (that Cedrus lacks). Provided that the SRAM driver builds fine > > for non-sunxi configs, bringing-in that select would remove the need > > for dummy functions and also ensure that the actual implementation is > > always used on sunxi. Otherwise, there'd be a risk of having the dummy > > functions used (if the SRAM driver is not explicitly selected in the > > config), causing a hang when accessing the VPU. > > You should certainly select this kernel config. > > But the real problem seems to to be drivers/soc/Makefile where it says: > > obj-$(CONFIG_ARCH_SUNXI) += sunxi/ > > I think this should be: > > obj-y += sunxi/ > > Now all compiles fine on i686 with the cedrus driver selecting SUNXI_SRAM. I have just crafted a patch to the attention of Maxime to allow building the sunxi SRAM driver without selecting the sunxi architecture, the way you suggested. With that, I just sent out v2 of the follow-up series for the Cedrus driver, which should cover the build issues encountered so far. Hopefully everything should be in order this time! Cheers, Paul -- Developer of free digital technology and hardware support. Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
Attachment:
signature.asc
Description: This is a digitally signed message part
