DRM pipelines now support tri-planar as well as packed formats with
YCbCr, however the pitch calculation was not updated to support this.
Correct this by adjusting the bytesperline accordingly when 3 planes are
used.
Fixes: 7863ac504bc5 ("drm: rcar-du: Add tri-planar memory formats support")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
---
drivers/media/platform/vsp1/vsp1_drm.c | 10 ++++++++++
include/media/vsp1.h | 2 +-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index b9c0f695d002..b9afd98f6867 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -814,6 +814,16 @@ int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index,
rpf->format.num_planes = fmtinfo->planes;
rpf->format.plane_fmt[0].bytesperline = cfg->pitch;
rpf->format.plane_fmt[1].bytesperline = cfg->pitch;
+
+ /*
+ * Packed YUV formats are subsampled, but the packing of two components
+ * into a single plane compensates for this leaving the bytesperline
+ * to be the correct value. For multiplanar formats we must adjust the
+ * pitch accordingly.
+ */
+ if (fmtinfo->planes == 3)
+ rpf->format.plane_fmt[1].bytesperline /= fmtinfo->hsub;
+
rpf->alpha = cfg->alpha;
rpf->mem.addr[0] = cfg->mem[0];
diff --git a/include/media/vsp1.h b/include/media/vsp1.h
index 3093b9cb9067..0ce19b595cc7 100644
--- a/include/media/vsp1.h
+++ b/include/media/vsp1.h
@@ -46,7 +46,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
/**
* struct vsp1_du_atomic_config - VSP atomic configuration parameters
* @pixelformat: plane pixel format (V4L2 4CC)
- * @pitch: line pitch in bytes, for all planes
+ * @pitch: line pitch in bytes
* @mem: DMA memory address for each plane of the frame buffer
* @src: source rectangle in the frame buffer (integer coordinates)
* @dst: destination rectangle on the display (integer coordinates)
--
2.17.1
